[coreboot] Coreboot fails to initialize on ASUS A8V-E SE

Knut Kujat knuku at gap.upv.es
Wed Dec 9 11:56:43 CET 2009


Rudolf Marek escribió:
> Hi,
>
> Try experimenting with the position of used memory slots. Maybe you
> just need to
>  put DIMMS into right places ;) I think I used the slot closest to CPU
> then one
> empty and then the second DIM and then the closest to edge empty.
>
> Rudolf
>
Hello,

yes switching memory slots to "CPU yes no yes no" worked perfectly. Now
I'm stucked with dev_enumeration more precisely scan_bus fails with a
malloc error. I already had this error with PCI: 00:10.1 - 00:10.4 (the
USB) I disabled them in the device tree with /device pci 10.1 off end
/but now it fails again and i can't just disable the whole PCI bus 2
since the VGA is on it.


PCI: 01:1d.0, bad id 0xffffffff
PCI: 01:1e.0, bad id 0xffffffff
PCI: 01:1f.0, bad id 0xffffffff
POST: 0x25
PCI: pci_scan_bus returning with max=001
POST: 0x55
do_pci_scan_bridge returns max 1
do_pci_scan_bridge for PCI: 00:02.0
PCI: pci_scan_bus for bus 02
POST: 0x24
malloc Enter, size 1092, free_mem_ptr 0014bffc
Error! malloc: Out of memory (free_mem_ptr >= free_mem_end_ptr)POST: 0xff

Thanks again, without the maillist i would be lost! :)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20091209/057c9d41/attachment.html>


More information about the coreboot mailing list