[coreboot] Coreboot fails to initialize on ASUS A8V-E SE
Knut Kujat
knuku at gap.upv.es
Mon Dec 14 12:03:26 CET 2009
Myles Watson escribió:
>
> I made it compile and it worked I get till filo payload after that
> it stucks because:
> Error 18: Selected cylinder exceeds maximum supported by BIOS
>
> but I thing thats a minor problem the most important thing is that
> the old revision worked.
>
>
> I'd like to see it work for you with Kconfig. Could you send me a
> working log for me to compare with the last one you sent me?
>
> Thanks,
> Myles
Hi again,
here is a funny twist, I tried out revision 4977 building it with
Kconfig and nothing still not working! But then I tried the buildtarget
system with the same revision and it worked perfectly it boots and
everything seems to work except the soundcard huu and I haven't tried
out my NIC.
I send you two log files one with the boot process using Kconfig (as far
as I could get) and using buildtarget.
bye and thx,
Knut Kujat
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20091214/80f9e5af/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: coreboot4977build.log
Type: text/x-log
Size: 88893 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20091214/80f9e5af/attachment.log>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: coreboot4977Kcon.log
Type: text/x-log
Size: 196600 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20091214/80f9e5af/attachment-0001.log>
More information about the coreboot
mailing list