[coreboot] Problems porting H8dmr_fam10 to H8qme-2+

Knut Kujat knuku at gap.upv.es
Thu Dec 17 15:03:27 CET 2009


Hi,

I did some small changes in Config.lb and Options.lb and then I compiled
the H8dmr_fam10 board to flash it in a H8qme-2+ board. And of course the
booting fails :(:

(split)40K table at =dfff0000
0: mmio_basek=00380000, basek=00400000, limitk=00000000
1: mmio_basek=00380000, basek=00480000, limitk=00000000
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 ?
VGA: PCI: 00:18.0 (aka node 0) link 2 has VGA device

and here it stucks and doesn't continues.

I attached several lspci outputs for the h8qme-2+ board and a complete
log of the boot process.

Has someone an idea what is failing?

thanks in advanced,
Knut Kujat.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Coreboot.log
Type: text/x-log
Size: 110365 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20091217/88396837/attachment.log>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: lspci
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20091217/88396837/attachment.ksh>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: lspciTVNN
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20091217/88396837/attachment-0001.ksh>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: lspcivvv
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20091217/88396837/attachment-0002.ksh>


More information about the coreboot mailing list