[coreboot] arima irq issues

Hugh Greenberg hng at lanl.gov
Tue Dec 22 17:59:57 CET 2009


Hello again.  I still have issues with the ARIMA.  I am now getting 
errors from Linux regarding IRQs and the MP table.  I've tried various 
Linux options and none of them have helped.  This seems to be preventing 
the ethernet and myrinet cards from functioning.  Here is the relevant 
output:

pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
disabled boot interrupts on PCI device 0x1022:0x7450
pci 0000:00:01.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
pci 0000:00:02.0: MSI quirk detected; subordinate MSI disabled
disabled boot interrupts on PCI device 0x1022:0x7450
pci 0000:00:02.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
boot interrupts on PCI device 0x1022:0x746b already disabled
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
�serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 0000:00:04.6: can't find IRQ for PCI INT B; probably buggy MP table
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:03:00.0: can't find IRQ for PCI INT D; probably buggy MP table
ohci_hcd 0000:03:00.0: Found HC with no IRQ.  Check BIOS/PCI 
0000:03:00.0 setup!
ohci_hcd 0000:03:00.0: init 0000:03:00.0 fail, -19
ohci_hcd 0000:03:00.1: can't find IRQ for PCI INT D; probably buggy MP table
ohci_hcd 0000:03:00.1: Found HC with no IRQ.  Check BIOS/PCI 
0000:03:00.1 setup!
ohci_hcd 0000:03:00.1: init 0000:03:00.1 fail, -19
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
Clocksource tsc unstable (delta = 148473685 ns)
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: 
dm-devel at redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
   Magic number: 5:661:239
rtc_cmos rtc_cmos: setting system clock to 2009-12-22 17:12:30 UTC 
(1261501950)
Initalizing network drop monitor service
Freeing unused kernel memory: 1324k freed
Write protecting the kernel read-only data: 6344k
                 Welcome to Fedora
                 Press 'I' to enter interactive startup.
Starting udev: [  OK  ]
Setting hostname m91:  [  OK  ]
Setting up Logical Volume Management: [  OK  ]
Remounting root filesystem in read-write mode:  [  OK  ]
Mounting local filesystems:  [  OK  ]
Enabling /etc/fstab swaps:  [  OK  ]
Entering non-interactive startup
Starting gm... Warning: /dev/gm* devices were not created, doing it now...
active mapper... done.
Bringing up loopback interface:  [  OK  ]
Bringing up interface eth0:
Determining IP information for eth0... failed; no link present.  Check 
cable?
[FAILED]
Bringing up interface myri0:
Determining IP information for myri0...RTNETLINK answers: Input/output error

Any ideas?  Thanks.

-- 
Hugh Greenberg






More information about the coreboot mailing list