[coreboot] making coreboot for Tyan s4882?
dchmelik at gmail.com
Tue Feb 3 08:13:42 CET 2009
>>The make error for s4882 being discussed:
>>objcopy --gap-fill 0xff -O binary coreboot coreboot.strip
>>make: *** No rule to make target `grub2', needed by `payload'. Stop.
>>make: Leaving directory `/root/coreboot-v2-3923/targets/tyan/s4882/s4882/normal'
>>make: *** [normal/coreboot.rom] Error 1
> I meant targets/tyan/s4882/s4882/grub2.elf. Sorry.
(Perhaps 'payload' should be in $target in the first place.) I did that
and got the exact same results (I tried payload 'grub2' and './grub2,'
and also put it in 'fallback.') I wrote a longer letter this afternoon,
but Thunderbird did not send it or save a copy, so this will be short.
I will still say I noticed this funny line in s4882: 'cp -f
$TYANMB"_coreboot.rom" /home/yhlu/.' Since make says it has no rule for
'target 'grub2,' needed by payload,' I searched through config.py for
'target,' 'image,' etc. and I do not see how it works.
More information about the coreboot