[coreboot] ACPI on m57sli v1.0

[Andreas B. Mundt]

On Thursday 02 July 2009 20:22:50 Harald Gutmann wrote:
> On Thursday 02 July 2009 17:56:30 Andreas B. Mundt wrote:
> > Hi everybody,
> >
> > just noticed that my parallel port printer unfortunately only works
> >
> > with the prop. BIOS:
> > >From dmesg:
> >
> > coreboot:
> > [   54.388956] lp: driver loaded but no devices found
> > [   54.409159] ppdev: user-space parallel port driver
> >
> > prop. BIOS:
> > [  179.494713] lp0: using parport0 (interrupt-driven).
> > [  179.516281] ppdev: user-space parallel port driver
>
> With the attached patch I get the following output on modprobe parport:
> [   28.848297] lp0: using parport0 (polling).
> [   28.858860] ppdev: user-space parallel port driver
>
> The patch also turns on the floppy device, but I've none here to verify if
> it will work. It would be great if you can test if floppy works, so that we
> could mark the last two "not-working" parts as OK in the wiki, if it the
> floppy does its job
Sry, I forgot to sign it off:
Signed-off-by: Harald Gutmann <harald.gutmann at gmx.net>

Patch tested succesfully with parallel-port printer.

Acked-by: Andreas B. Mundt


Thanks,

	Andi