[coreboot] [FILO] EPIA-NL/CN400 Port.... FILO Booting kernel, init probs
Harrison, Jon (SELEX GALILEO, UK)
jon.harrison at selexgalileo.com
Tue Jul 14 18:23:59 CEST 2009
Hi Folks,
I've added initial ACPI support to my EPIA-NL/CN400 Port.
This has allowed me to get to the point where I can run FILO and start to boot a kernel from SATA.
FILO is finding the kernel and initrd image and kicks off the boot process, the kernel is picking up the ACPI tables and starts PCI init (note use of ACPI=force to get around lack of DMI support).
I think the issues are concerned with the South Bridge Init (VT8237R), There a bunch of USB UHCI problems reported and then the boot hangs configuring/mounting sda1
Below is the coreboot spew level output, FILO startup and then linux init.
I'd appreciate any pointers as to what's going on, particularly the later FILO/Linux init stages.
Thanks,
Jon
******************************************************************
coreboot-2.0.0-r1M-epia_n-fallback Tue Jul 14 15:52:50 BST 2009 starting...
In auto.c:main()
Enabling mainboard devices
Enable F-ROM Shadow RAM
Setup CPU Interface
CN400 RAM init starting
Setting Burst Length 8
Low Bond 41 High Bond 79 Setting DQS delay66
CN400 Init done
doing early_mtrr
Leaving auto.c:main()
Uncompressing coreboot to RAM.
src=fffe0000
dst=00004000
Uncompressing image to RAM.
image length = 00018058
Jumping to image.
coreboot-2.0.0-r1M-epia_n-fallback Tue Jul 14 15:52:50 BST 2009 booting...
Calibrating delay loop...
end 99fe9ba6, start 2ca09f0e
32-bit delta 1749
calibrate_tsc 32-bit result is 1749
clocks_per_usec: 1749
Enumerating buses...
Show all devs...Before Device Enumeration.
Root Device: enabled 1, 0 resources
PCI_DOMAIN: 0000: enabled 1, 0 resources
PCI: 00:00.0: enabled 1, 0 resources
PCI: 00:00.1: enabled 1, 0 resources
PCI: 00:00.2: enabled 1, 0 resources
PCI: 00:00.3: enabled 1, 0 resources
PCI: 00:00.4: enabled 1, 0 resources
PCI: 00:00.7: enabled 1, 0 resources
PCI: 00:01.0: enabled 1, 0 resources
PCI: 00:0f.0: enabled 1, 0 resources
PCI: 00:0f.1: enabled 1, 0 resources
PCI: 00:10.0: enabled 1, 0 resources
PCI: 00:10.1: enabled 1, 0 resources
PCI: 00:10.2: enabled 1, 0 resources
PCI: 00:10.3: enabled 1, 0 resources
PCI: 00:10.4: enabled 1, 0 resources
PCI: 00:11.0: enabled 1, 0 resources
PNP: 002e.0: enabled 0, 3 resources
PNP: 002e.1: enabled 0, 3 resources
PNP: 002e.2: enabled 1, 2 resources
PNP: 002e.3: enabled 0, 2 resources
PNP: 002e.6: enabled 0, 1 resources
PNP: 002e.7: enabled 0, 1 resources
PNP: 002e.8: enabled 0, 1 resources
PNP: 002e.9: enabled 0, 1 resources
PNP: 002e.a: enabled 0, 1 resources
PNP: 002e.b: enabled 1, 2 resources
PCI: 00:11.5: enabled 0, 0 resources
PCI: 00:11.6: enabled 0, 0 resources
PCI: 00:12.0: enabled 1, 0 resources
APIC_CLUSTER: 0: enabled 1, 0 resources
APIC: 00: enabled 1, 0 resources
Compare with tree...
Root Device: enabled 1, 0 resources
PCI_DOMAIN: 0000: enabled 1, 0 resources
PCI: 00:00.0: enabled 1, 0 resources
PCI: 00:00.1: enabled 1, 0 resources
PCI: 00:00.2: enabled 1, 0 resources
PCI: 00:00.3: enabled 1, 0 resources
PCI: 00:00.4: enabled 1, 0 resources
PCI: 00:00.7: enabled 1, 0 resources
PCI: 00:01.0: enabled 1, 0 resources
PCI: 00:0f.0: enabled 1, 0 resources
PCI: 00:0f.1: enabled 1, 0 resources
PCI: 00:10.0: enabled 1, 0 resources
PCI: 00:10.1: enabled 1, 0 resources
PCI: 00:10.2: enabled 1, 0 resources
PCI: 00:10.3: enabled 1, 0 resources
PCI: 00:10.4: enabled 1, 0 resources
PCI: 00:11.0: enabled 1, 0 resources
PNP: 002e.0: enabled 0, 3 resources
PNP: 002e.1: enabled 0, 3 resources
PNP: 002e.2: enabled 1, 2 resources
PNP: 002e.3: enabled 0, 2 resources
PNP: 002e.6: enabled 0, 1 resources
PNP: 002e.7: enabled 0, 1 resources
PNP: 002e.8: enabled 0, 1 resources
PNP: 002e.9: enabled 0, 1 resources
PNP: 002e.a: enabled 0, 1 resources
PNP: 002e.b: enabled 1, 2 resources
PCI: 00:11.5: enabled 0, 0 resources
PCI: 00:11.6: enabled 0, 0 resources
PCI: 00:12.0: enabled 1, 0 resources
APIC_CLUSTER: 0: enabled 1, 0 resources
APIC: 00: enabled 1, 0 resources
scan_static_bus for Root Device
In cn400 enable_dev for device PCI_DOMAIN: 0000.
Finding PCI configuration type.
PCI: Using configuration type 1
PCI_DOMAIN: 0000 enabled
In cn400 enable_dev for device APIC_CLUSTER: 0.
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 scanning...
Entering cn400_domain_scan_bus.
PCI: pci_scan_bus for bus 00
In cn400 enable_dev for device PCI: 00:00.0.
PCI: 00:00.0 [1106/0259] ops
PCI: 00:00.0 [1106/0259] enabled
In cn400 enable_dev for device PCI: 00:00.1.
PCI: 00:00.1 [1106/1259] enabled
In cn400 enable_dev for device PCI: 00:00.2.
PCI: 00:00.2 [1106/2259] enabled
In cn400 enable_dev for device PCI: 00:00.3.
PCI: 00:00.3 [1106/3259] ops
PCI: 00:00.3 [1106/3259] enabled
In cn400 enable_dev for device PCI: 00:00.4.
PCI: 00:00.4 [1106/4259] enabled
PCI: 00:00.5, bad id 0xffffffff
PCI: 00:00.6, bad id 0xffffffff
In cn400 enable_dev for device PCI: 00:00.7.
PCI: 00:00.7 [1106/7259] enabled
In cn400 enable_dev for device PCI: 00:01.0.
PCI: 00:01.0 [1106/b198] bus ops
PCI: 00:01.0 [1106/b198] enabled
PCI: 00:02.0, bad id 0xffffffff
PCI: 00:03.0, bad id 0xffffffff
PCI: 00:04.0, bad id 0xffffffff
PCI: 00:05.0, bad id 0xffffffff
PCI: 00:06.0, bad id 0xffffffff
PCI: 00:07.0, bad id 0xffffffff
PCI: 00:08.0, bad id 0xffffffff
PCI: 00:09.0, bad id 0xffffffff
PCI: 00:0a.0, bad id 0xffffffff
PCI: 00:0b.0, bad id 0xffffffff
PCI: 00:0c.0, bad id 0xffffffff
PCI: 00:0d.0, bad id 0xffffffff
PCI: 00:0e.0, bad id 0xffffffff
PCI: 00:0f.0 [1106/3149] ops
PCI: 00:0f.0 [1106/3149] enabled
PCI: 00:0f.1 [1106/0571] ops
PCI: 00:0f.1 [1106/0571] enabled
PCI: 00:0f.2, bad id 0xffffffff
PCI: 00:0f.3, bad id 0xffffffff
PCI: 00:0f.4, bad id 0xffffffff
PCI: 00:0f.5, bad id 0xffffffff
PCI: 00:0f.6, bad id 0xffffffff
PCI: 00:0f.7, bad id 0xffffffff
PCI: 00:10.0 [1106/3038] enabled
PCI: 00:10.1 [1106/3038] enabled
PCI: 00:10.2 [1106/3038] enabled
PCI: 00:10.3 [1106/3038] enabled
PCI: 00:10.4 [1106/3104] enabled
malloc Enter, size 1100, free_mem_ptr 00022000
malloc 00022000
PCI: 00:10.5 [1106/d104] enabled
PCI: 00:10.6, bad id 0xffffffff
PCI: 00:10.7, bad id 0xffffffff
PCI: 00:11.0 [1106/3227] bus ops
PCI: 00:11.0 [1106/3227] enabled
PCI: 00:11.1, bad id 0xffffffff
PCI: 00:11.2, bad id 0xffffffff
PCI: 00:11.3, bad id 0xffffffff
PCI: 00:11.4, bad id 0xffffffff
PCI: 00:11.5 [1106/3059] disabled
PCI: 00:11.7, bad id 0xffffffff
PCI: 00:12.0 [1106/3065] enabled
PCI: 00:13.0, bad id 0xffffffff
PCI: 00:14.0, bad id 0xffffffff
PCI: 00:15.0, bad id 0xffffffff
PCI: 00:16.0, bad id 0xffffffff
PCI: 00:17.0, bad id 0xffffffff
PCI: 00:18.0, bad id 0xffffffff
PCI: 00:19.0, bad id 0xffffffff
PCI: 00:1a.0, bad id 0xffffffff
PCI: 00:1b.0, bad id 0xffffffff
PCI: 00:1c.0, bad id 0xffffffff
PCI: 00:1d.0, bad id 0xffffffff
PCI: 00:1e.0, bad id 0xffffffff
PCI: 00:1f.0, bad id 0xffffffff
do_pci_scan_bridge for PCI: 00:01.0
PCI: pci_scan_bus for bus 01
malloc Enter, size 1100, free_mem_ptr 0002244c
malloc 0002244c
PCI: 01:00.0 [1106/3118] ops
PCI: 01:00.0 [1106/3118] enabled
PCI: 01:01.0, bad id 0xffffffff
PCI: 01:02.0, bad id 0xffffffff
PCI: 01:03.0, bad id 0xffffffff
PCI: 01:04.0, bad id 0xffffffff
PCI: 01:05.0, bad id 0xffffffff
PCI: 01:06.0, bad id 0xffffffff
PCI: 01:07.0, bad id 0xffffffff
PCI: 01:08.0, bad id 0xffffffff
PCI: 01:09.0, bad id 0xffffffff
PCI: 01:0a.0, bad id 0xffffffff
PCI: 01:0b.0, bad id 0xffffffff
PCI: 01:0c.0, bad id 0xffffffff
PCI: 01:0d.0, bad id 0xffffffff
PCI: 01:0e.0, bad id 0xffffffff
PCI: 01:0f.0, bad id 0xffffffff
PCI: 01:10.0, bad id 0xffffffff
PCI: 01:11.0, bad id 0xffffffff
PCI: 01:12.0, bad id 0xffffffff
PCI: 01:13.0, bad id 0xffffffff
PCI: 01:14.0, bad id 0xffffffff
PCI: 01:15.0, bad id 0xffffffff
PCI: 01:16.0, bad id 0xffffffff
PCI: 01:17.0, bad id 0xffffffff
PCI: 01:18.0, bad id 0xffffffff
PCI: 01:19.0, bad id 0xffffffff
PCI: 01:1a.0, bad id 0xffffffff
PCI: 01:1b.0, bad id 0xffffffff
PCI: 01:1c.0, bad id 0xffffffff
PCI: 01:1d.0, bad id 0xffffffff
PCI: 01:1e.0, bad id 0xffffffff
PCI: 01:1f.0, bad id 0xffffffff
PCI: pci_scan_bus returning with max=001
do_pci_scan_bridge returns max 1
scan_static_bus for PCI: 00:11.0
PNP: 002e.0 disabled
PNP: 002e.1 disabled
PNP: 002e.2 enabled
PNP: 002e.3 disabled
PNP: 002e.6 disabled
PNP: 002e.7 disabled
PNP: 002e.8 disabled
PNP: 002e.9 disabled
PNP: 002e.a disabled
PNP: 002e.b enabled
scan_static_bus for PCI: 00:11.0 done
PCI: pci_scan_bus returning with max=001
scan_static_bus for Root Device done
done
Allocating resources...
Reading resources...
Root Device read_resources bus 0 link: 0
Entering cn400_domain_read_resources.
Leaving cn400_domain_read_resources.
PCI_DOMAIN: 0000 read_resources bus 0 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0 done
PCI: 00:11.0 read_resources bus 0 link: 0
PCI: 00:11.0 read_resources bus 0 link: 0 done
PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done
APIC_CLUSTER: 0 read_resources bus 0 link: 0
APIC: 00 missing read_resources
APIC_CLUSTER: 0 read_resources bus 0 link: 0 done
Root Device read_resources bus 0 link: 0 done
Done reading resources.
Show resources in subtree (Root Device)...After reading.
Root Device links 1 child on link 0 Root Device
PCI_DOMAIN: 0000 links 1 child on link 0 PCI_DOMAIN: 0000
PCI_DOMAIN: 0000 resource base 0 size 0 align 0 gran 0 limit ffff flags 40040100 index 10000000
PCI_DOMAIN: 0000 resource base 0 size 0 align 0 gran 0 limit ffffffff flags 40040200 index 10000100
PCI: 00:00.0 links 0 child on link 0 NULL
PCI: 00:00.1 links 0 child on link 0 NULL
PCI: 00:00.2 links 0 child on link 0 NULL
PCI: 00:00.3 links 0 child on link 0 NULL
PCI: 00:00.4 links 0 child on link 0 NULL
PCI: 00:00.7 links 0 child on link 0 NULL
PCI: 00:01.0 links 1 child on link 0 PCI: 00:01.0
PCI: 01:00.0 links 0 child on link 0 NULL
PCI: 01:00.0 resource base 0 size 4000000 align 26 gran 26 limit ffffffff flags 1200 index 10
PCI: 01:00.0 resource base 0 size 1000000 align 24 gran 24 limit ffffffff flags 200 index 14
PCI: 01:00.0 resource base fff80000 size 10000 align 16 gran 16 limit ffffffff flags c0002200 index 30
PCI: 00:0f.0 links 0 child on link 0 NULL
PCI: 00:0f.0 resource base 0 size 8 align 3 gran 3 limit ffff flags 100 index 10
PCI: 00:0f.0 resource base 0 size 4 align 2 gran 2 limit ffff flags 100 index 14
PCI: 00:0f.0 resource base 0 size 8 align 3 gran 3 limit ffff flags 100 index 18
PCI: 00:0f.0 resource base 0 size 4 align 2 gran 2 limit ffff flags 100 index 1c
PCI: 00:0f.0 resource base 0 size 10 align 4 gran 4 limit ffff flags 100 index 20
PCI: 00:0f.0 resource base 0 size 100 align 8 gran 8 limit ffff flags 100 index 24
PCI: 00:0f.1 links 0 child on link 0 NULL
PCI: 00:0f.1 resource base 0 size 10 align 4 gran 4 limit ffff flags 100 index 20
PCI: 00:10.0 links 0 child on link 0 NULL
PCI: 00:10.0 resource base 0 size 20 align 5 gran 5 limit ffff flags 100 index 20
PCI: 00:10.1 links 0 child on link 0 NULL
PCI: 00:10.1 resource base 0 size 20 align 5 gran 5 limit ffff flags 100 index 20
PCI: 00:10.2 links 0 child on link 0 NULL
PCI: 00:10.2 resource base 0 size 20 align 5 gran 5 limit ffff flags 100 index 20
PCI: 00:10.3 links 0 child on link 0 NULL
PCI: 00:10.3 resource base 0 size 20 align 5 gran 5 limit ffff flags 100 index 20
PCI: 00:10.4 links 0 child on link 0 NULL
PCI: 00:10.4 resource base 0 size 100 align 8 gran 8 limit ffffffff flags 200 index 10
PCI: 00:10.5 links 0 child on link 0 NULL
PCI: 00:10.5 resource base 0 size 100 align 8 gran 8 limit ffffffff flags 200 index 10
PCI: 00:11.0 links 1 child on link 0 PCI: 00:11.0
PCI: 00:11.0 resource base fec00000 size 100 align 8 gran 8 limit fec000ff flags e0000200 index 44
PNP: 002e.0 links 0 child on link 0 NULL
PNP: 002e.0 resource base 3f0 size 8 align 3 gran 3 limit 7ff flags c0000100 index 60
PNP: 002e.0 resource base 6 size 1 align 0 gran 0 limit 0 flags c0000400 index 70
PNP: 002e.0 resource base 2 size 1 align 0 gran 0 limit 0 flags c0000800 index 74
PNP: 002e.1 links 0 child on link 0 NULL
PNP: 002e.1 resource base 378 size 8 align 3 gran 3 limit 7ff flags c0000100 index 60
PNP: 002e.1 resource base 7 size 1 align 0 gran 0 limit 0 flags c0000400 index 70
PNP: 002e.1 resource base 3 size 1 align 0 gran 0 limit 0 flags c0000800 index 74
PNP: 002e.2 links 0 child on link 0 NULL
PNP: 002e.2 resource base 3f8 size 8 align 3 gran 3 limit 7ff flags c0000100 index 60
PNP: 002e.2 resource base 4 size 1 align 0 gran 0 limit 0 flags c0000400 index 70
PNP: 002e.3 links 0 child on link 0 NULL
PNP: 002e.3 resource base 2f8 size 8 align 3 gran 3 limit 7ff flags c0000100 index 60
PNP: 002e.3 resource base 3 size 1 align 0 gran 0 limit 0 flags c0000400 index 70
PNP: 002e.6 links 0 child on link 0 NULL
PNP: 002e.6 resource base 0 size 8 align 3 gran 3 limit 7ff flags c0000100 index 60
PNP: 002e.6 resource base 0 size 1 align 0 gran 0 limit 0 flags 400 index 70
PNP: 002e.7 links 0 child on link 0 NULL
PNP: 002e.7 resource base 201 size 1 align 0 gran 0 limit ffffffff flags c0000100 index 60
PNP: 002e.7 resource base 0 size 2 align 1 gran 1 limit 7ff flags 100 index 62
PNP: 002e.7 resource base 0 size 1 align 0 gran 0 limit 0 flags 400 index 70
PNP: 002e.8 links 0 child on link 0 NULL
PNP: 002e.8 resource base 330 size 0 align 0 gran 0 limit 0 flags c0000100 index 60
PNP: 002e.9 links 0 child on link 0 NULL
PNP: 002e.9 resource base 0 size 0 align 0 gran 0 limit 0 flags c0000100 index 60
PNP: 002e.a links 0 child on link 0 NULL
PNP: 002e.a resource base 0 size 0 align 0 gran 0 limit 0 flags c0000100 index 60
PNP: 002e.b links 0 child on link 0 NULL
PNP: 002e.b resource base 290 size 8 align 3 gran 3 limit fff flags c0000100 index 60
PNP: 002e.b resource base 0 size 1 align 0 gran 0 limit 0 flags c0000400 index 70
PCI: 00:11.5 links 0 child on link 0 NULL
PCI: 00:11.6 links 0 child on link 0 NULL
PCI: 00:12.0 links 0 child on link 0 NULL
PCI: 00:12.0 resource base 0 size 100 align 8 gran 8 limit ffff flags 100 index 10
PCI: 00:12.0 resource base 0 size 100 align 8 gran 8 limit ffffffff flags 200 index 14
APIC_CLUSTER: 0 links 1 child on link 0 APIC_CLUSTER: 0
APIC: 00 links 0 child on link 0 NULL
PCI_DOMAIN: 0000 compute_resources_io: base: 0 size: 0 align: 0 gran: 0 limit: ffff
PCI: 00:0f.0 24 * [0x0 - 0xff] io
PCI: 00:12.0 10 * [0x400 - 0x4ff] io
PCI: 00:10.0 20 * [0x800 - 0x81f] io
PCI: 00:10.1 20 * [0x820 - 0x83f] io
PCI: 00:10.2 20 * [0x840 - 0x85f] io
PCI: 00:10.3 20 * [0x860 - 0x87f] io
PCI: 00:0f.0 20 * [0x880 - 0x88f] io
PCI: 00:0f.1 20 * [0x890 - 0x89f] io
PCI: 00:0f.0 10 * [0x8a0 - 0x8a7] io
PCI: 00:0f.0 18 * [0x8a8 - 0x8af] io
PCI: 00:0f.0 14 * [0x8b0 - 0x8b3] io
PCI: 00:0f.0 1c * [0x8b4 - 0x8b7] io
PCI_DOMAIN: 0000 compute_resources_io: base: 8b8 size: 8b8 align: 8 gran: 0 limit: ffff done
PCI_DOMAIN: 0000 compute_resources_mem: base: 0 size: 0 align: 0 gran: 0 limit: ffffffff
PCI: 00:10.4 10 * [0x0 - 0xff] mem
PCI: 00:10.5 10 * [0x100 - 0x1ff] mem
PCI: 00:12.0 14 * [0x200 - 0x2ff] mem
PCI_DOMAIN: 0000 compute_resources_mem: base: 300 size: 300 align: 8 gran: 0 limit: ffffffff done
avoid_fixed_resources: PCI_DOMAIN: 0000
avoid_fixed_resources:@PCI_DOMAIN: 0000 10000000 limit 0000ffff
avoid_fixed_resources:@PCI_DOMAIN: 0000 10000100 limit ffffffff
constrain_resources: PCI_DOMAIN: 0000
constrain_resources: PCI: 00:00.0
constrain_resources: PCI: 00:00.1
constrain_resources: PCI: 00:00.2
constrain_resources: PCI: 00:00.3
constrain_resources: PCI: 00:00.4
constrain_resources: PCI: 00:00.7
constrain_resources: PCI: 00:01.0
constrain_resources: PCI: 01:00.0
constrain_resources: PCI: 00:0f.0
constrain_resources: PCI: 00:0f.1
constrain_resources: PCI: 00:10.0
constrain_resources: PCI: 00:10.1
constrain_resources: PCI: 00:10.2
constrain_resources: PCI: 00:10.3
constrain_resources: PCI: 00:10.4
constrain_resources: PCI: 00:10.5
constrain_resources: PCI: 00:11.0
constrain_resources: PNP: 002e.2
constrain_resources: PNP: 002e.b
constrain_resources: PCI: 00:12.0
avoid_fixed_resources2: PCI_DOMAIN: 0000 at 10000000 limit 0000ffff
lim->base 00000400 lim->limit 0000ffff
avoid_fixed_resources2: PCI_DOMAIN: 0000 at 10000100 limit ffffffff
lim->base 00000000 lim->limit febfffff
Setting resources...
PCI_DOMAIN: 0000 allocate_resources_io: base:400 size:8b8 align:8 gran:0 limit:ffff
Assigned: PCI: 00:0f.0 24 * [0x400 - 0x4ff] io
Assigned: PCI: 00:12.0 10 * [0x800 - 0x8ff] io
Assigned: PCI: 00:10.0 20 * [0xc00 - 0xc1f] io
Assigned: PCI: 00:10.1 20 * [0xc20 - 0xc3f] io
Assigned: PCI: 00:10.2 20 * [0xc40 - 0xc5f] io
Assigned: PCI: 00:10.3 20 * [0xc60 - 0xc7f] io
Assigned: PCI: 00:0f.0 20 * [0xc80 - 0xc8f] io
Assigned: PCI: 00:0f.1 20 * [0xc90 - 0xc9f] io
Assigned: PCI: 00:0f.0 10 * [0xca0 - 0xca7] io
Assigned: PCI: 00:0f.0 18 * [0xca8 - 0xcaf] io
Assigned: PCI: 00:0f.0 14 * [0xcb0 - 0xcb3] io
Assigned: PCI: 00:0f.0 1c * [0xcb4 - 0xcb7] io
PCI_DOMAIN: 0000 allocate_resources_io: next_base: cb8 size: 8b8 align: 8 gran: 0 done
PCI_DOMAIN: 0000 allocate_resources_mem: base:febffd00 size:300 align:8 gran:0 limit:febfffff
Assigned: PCI: 00:10.4 10 * [0xfebffd00 - 0xfebffdff] mem
Assigned: PCI: 00:10.5 10 * [0xfebffe00 - 0xfebffeff] mem
Assigned: PCI: 00:12.0 14 * [0xfebfff00 - 0xfebfffff] mem
PCI_DOMAIN: 0000 allocate_resources_mem: next_base: fec00000 size: 300 align: 8 gran: 0 done
Root Device assign_resources, bus 0 link: 0
Entering cn400_domain_set_resources.
Entering CN400 find_pci_tolm
Leaving CN400 find_pci_tolm
tomk is 0x100000, tolmk is 0x003FAFFF
tom: 40000000, high_tables_base: 3bff0000, high_tables_size: 10000
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
PCI: 00:0f.0 10 <- [0x0000000ca0 - 0x0000000ca7] size 0x00000008 gran 0x03 io
PCI: 00:0f.0 14 <- [0x0000000cb0 - 0x0000000cb3] size 0x00000004 gran 0x02 io
PCI: 00:0f.0 18 <- [0x0000000ca8 - 0x0000000caf] size 0x00000008 gran 0x03 io
PCI: 00:0f.0 1c <- [0x0000000cb4 - 0x0000000cb7] size 0x00000004 gran 0x02 io
PCI: 00:0f.0 20 <- [0x0000000c80 - 0x0000000c8f] size 0x00000010 gran 0x04 io
PCI: 00:0f.0 24 <- [0x0000000400 - 0x00000004ff] size 0x00000100 gran 0x08 io
PCI: 00:0f.1 20 <- [0x0000000c90 - 0x0000000c9f] size 0x00000010 gran 0x04 io
PCI: 00:10.0 20 <- [0x0000000c00 - 0x0000000c1f] size 0x00000020 gran 0x05 io
PCI: 00:10.1 20 <- [0x0000000c20 - 0x0000000c3f] size 0x00000020 gran 0x05 io
PCI: 00:10.2 20 <- [0x0000000c40 - 0x0000000c5f] size 0x00000020 gran 0x05 io
PCI: 00:10.3 20 <- [0x0000000c60 - 0x0000000c7f] size 0x00000020 gran 0x05 io
PCI: 00:10.4 10 <- [0x00febffd00 - 0x00febffdff] size 0x00000100 gran 0x08 mem
PCI: 00:10.5 10 <- [0x00febffe00 - 0x00febffeff] size 0x00000100 gran 0x08 mem
PCI: 00:11.0 assign_resources, bus 0 link: 0
PNP: 002e.2 60 <- [0x00000003f8 - 0x00000003ff] size 0x00000008 gran 0x03 io
PNP: 002e.2 70 <- [0x0000000004 - 0x0000000004] size 0x00000001 gran 0x00 irq
PNP: 002e.b 60 <- [0x0000000290 - 0x0000000297] size 0x00000008 gran 0x03 io
PNP: 002e.b 70 <- [0x0000000000 - 0x0000000000] size 0x00000001 gran 0x00 irq
PCI: 00:11.0 assign_resources, bus 0 link: 0
PCI: 00:12.0 10 <- [0x0000000800 - 0x00000008ff] size 0x00000100 gran 0x08 io
PCI: 00:12.0 14 <- [0x00febfff00 - 0x00febfffff] size 0x00000100 gran 0x08 mem
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
Leaving cn400_domain_set_resources.
Root Device assign_resources, bus 0 link: 0
Done setting resources.
Show resources in subtree (Root Device)...After assigning values.
Root Device links 1 child on link 0 Root Device
PCI_DOMAIN: 0000 links 1 child on link 0 PCI_DOMAIN: 0000
PCI_DOMAIN: 0000 resource base 400 size 8b8 align 8 gran 0 limit ffff flags 40040100 index 10000000
PCI_DOMAIN: 0000 resource base febffd00 size 300 align 8 gran 0 limit febfffff flags 40040200 index 10000100
PCI_DOMAIN: 0000 resource base 0 size a0000 align 0 gran 0 limit 0 flags e0004200 index a
PCI_DOMAIN: 0000 resource base c0000 size 3bf40000 align 0 gran 0 limit 0 flags e0004200 index b
PCI: 00:00.0 links 0 child on link 0 NULL
PCI: 00:00.1 links 0 child on link 0 NULL
PCI: 00:00.2 links 0 child on link 0 NULL
PCI: 00:00.3 links 0 child on link 0 NULL
PCI: 00:00.4 links 0 child on link 0 NULL
PCI: 00:00.7 links 0 child on link 0 NULL
PCI: 00:01.0 links 1 child on link 0 PCI: 00:01.0
PCI: 01:00.0 links 0 child on link 0 NULL
PCI: 01:00.0 resource base 0 size 4000000 align 26 gran 26 limit ffffffff flags 1200 index 10
PCI: 01:00.0 resource base 0 size 1000000 align 24 gran 24 limit ffffffff flags 200 index 14
PCI: 01:00.0 resource base fff80000 size 10000 align 16 gran 16 limit ffffffff flags c0002200 index 30
PCI: 00:0f.0 links 0 child on link 0 NULL
PCI: 00:0f.0 resource base ca0 size 8 align 3 gran 3 limit ffff flags 60000100 index 10
PCI: 00:0f.0 resource base cb0 size 4 align 2 gran 2 limit ffff flags 60000100 index 14
PCI: 00:0f.0 resource base ca8 size 8 align 3 gran 3 limit ffff flags 60000100 index 18
PCI: 00:0f.0 resource base cb4 size 4 align 2 gran 2 limit ffff flags 60000100 index 1c
PCI: 00:0f.0 resource base c80 size 10 align 4 gran 4 limit ffff flags 60000100 index 20
PCI: 00:0f.0 resource base 400 size 100 align 8 gran 8 limit ffff flags 60000100 index 24
PCI: 00:0f.1 links 0 child on link 0 NULL
PCI: 00:0f.1 resource base c90 size 10 align 4 gran 4 limit ffff flags 60000100 index 20
PCI: 00:10.0 links 0 child on link 0 NULL
PCI: 00:10.0 resource base c00 size 20 align 5 gran 5 limit ffff flags 60000100 index 20
PCI: 00:10.1 links 0 child on link 0 NULL
PCI: 00:10.1 resource base c20 size 20 align 5 gran 5 limit ffff flags 60000100 index 20
PCI: 00:10.2 links 0 child on link 0 NULL
PCI: 00:10.2 resource base c40 size 20 align 5 gran 5 limit ffff flags 60000100 index 20
PCI: 00:10.3 links 0 child on link 0 NULL
PCI: 00:10.3 resource base c60 size 20 align 5 gran 5 limit ffff flags 60000100 index 20
PCI: 00:10.4 links 0 child on link 0 NULL
PCI: 00:10.4 resource base febffd00 size 100 align 8 gran 8 limit febfffff flags 60000200 index 10
PCI: 00:10.5 links 0 child on link 0 NULL
PCI: 00:10.5 resource base febffe00 size 100 align 8 gran 8 limit febfffff flags 60000200 index 10
PCI: 00:11.0 links 1 child on link 0 PCI: 00:11.0
PCI: 00:11.0 resource base fec00000 size 100 align 8 gran 8 limit fec000ff flags e0000200 index 44
PNP: 002e.0 links 0 child on link 0 NULL
PNP: 002e.0 resource base 3f0 size 8 align 3 gran 3 limit 7ff flags c0000100 index 60
PNP: 002e.0 resource base 6 size 1 align 0 gran 0 limit 0 flags c0000400 index 70
PNP: 002e.0 resource base 2 size 1 align 0 gran 0 limit 0 flags c0000800 index 74
PNP: 002e.1 links 0 child on link 0 NULL
PNP: 002e.1 resource base 378 size 8 align 3 gran 3 limit 7ff flags c0000100 index 60
PNP: 002e.1 resource base 7 size 1 align 0 gran 0 limit 0 flags c0000400 index 70
PNP: 002e.1 resource base 3 size 1 align 0 gran 0 limit 0 flags c0000800 index 74
PNP: 002e.2 links 0 child on link 0 NULL
PNP: 002e.2 resource base 3f8 size 8 align 3 gran 3 limit 7ff flags e0000100 index 60
PNP: 002e.2 resource base 4 size 1 align 0 gran 0 limit 0 flags e0000400 index 70
PNP: 002e.3 links 0 child on link 0 NULL
PNP: 002e.3 resource base 2f8 size 8 align 3 gran 3 limit 7ff flags c0000100 index 60
PNP: 002e.3 resource base 3 size 1 align 0 gran 0 limit 0 flags c0000400 index 70
PNP: 002e.6 links 0 child on link 0 NULL
PNP: 002e.6 resource base 0 size 8 align 3 gran 3 limit 7ff flags c0000100 index 60
PNP: 002e.6 resource base 0 size 1 align 0 gran 0 limit 0 flags 400 index 70
PNP: 002e.7 links 0 child on link 0 NULL
PNP: 002e.7 resource base 201 size 1 align 0 gran 0 limit ffffffff flags c0000100 index 60
PNP: 002e.7 resource base 0 size 2 align 1 gran 1 limit 7ff flags 100 index 62
PNP: 002e.7 resource base 0 size 1 align 0 gran 0 limit 0 flags 400 index 70
PNP: 002e.8 links 0 child on link 0 NULL
PNP: 002e.8 resource base 330 size 0 align 0 gran 0 limit 0 flags c0000100 index 60
PNP: 002e.9 links 0 child on link 0 NULL
PNP: 002e.9 resource base 0 size 0 align 0 gran 0 limit 0 flags c0000100 index 60
PNP: 002e.a links 0 child on link 0 NULL
PNP: 002e.a resource base 0 size 0 align 0 gran 0 limit 0 flags c0000100 index 60
PNP: 002e.b links 0 child on link 0 NULL
PNP: 002e.b resource base 290 size 8 align 3 gran 3 limit fff flags e0000100 index 60
PNP: 002e.b resource base 0 size 1 align 0 gran 0 limit 0 flags e0000400 index 70
PCI: 00:11.5 links 0 child on link 0 NULL
PCI: 00:11.6 links 0 child on link 0 NULL
PCI: 00:12.0 links 0 child on link 0 NULL
PCI: 00:12.0 resource base 800 size 100 align 8 gran 8 limit ffff flags 60000100 index 10
PCI: 00:12.0 resource base febfff00 size 100 align 8 gran 8 limit febfffff flags 60000200 index 14
APIC_CLUSTER: 0 links 1 child on link 0 APIC_CLUSTER: 0
APIC: 00 links 0 child on link 0 NULL
Done allocating resources.
Enabling resources...
PCI: 00:00.0 cmd <- 06
PCI: 00:00.1 subsystem <- 00/00
PCI: 00:00.1 cmd <- 06
PCI: 00:00.2 subsystem <- 00/00
PCI: 00:00.2 cmd <- 06
PCI: 00:00.4 subsystem <- 00/00
PCI: 00:00.4 cmd <- 06
PCI: 00:00.7 subsystem <- 00/00
PCI: 00:00.7 cmd <- 06
PCI: 00:01.0 bridge ctrl <- 0003
PCI: 00:01.0 cmd <- 07
PCI: 01:00.0 cmd <- 00
PCI: 00:0f.0 cmd <- 01
PCI: 00:0f.1 cmd <- 81
PCI: 00:10.0 subsystem <- 00/00
PCI: 00:10.0 cmd <- 01
PCI: 00:10.1 subsystem <- 00/00
PCI: 00:10.1 cmd <- 01
PCI: 00:10.2 subsystem <- 00/00
PCI: 00:10.2 cmd <- 01
PCI: 00:10.3 subsystem <- 00/00
PCI: 00:10.3 cmd <- 01
PCI: 00:10.4 subsystem <- 00/00
PCI: 00:10.4 cmd <- 02
PCI: 00:10.5 cmd <- 02
PCI: 00:11.0 cmd <- 07
PCI: 00:12.0 subsystem <- 00/00
PCI: 00:12.0 cmd <- 83
done.
Initializing devices...
Root Device init
PCI: 00:00.0 init
Enabling AGP.
PCI: 00:00.1 init
PCI: 00:00.2 init
PCI: 00:00.3 init
Entering cn400 memctrl_init.
Low Top Address = 0x03F0
Leaving cn400 memctrl_init.
PCI: 00:00.4 init
PCI: 00:00.7 init
PCI: 00:01.0 init
Setting up AGP bridge device
PCI: 00:0f.0 init
Configuring VIA SATA controller
PCI: 00:0f.1 init
Primary IDE interface enabled
Secondary IDE interface enabled
Enables in reg 0x40 read back as 0x4f
Enables in reg 0x42 read back as 0x9
PCI: 00:10.0 init
PCI: 00:10.1 init
PCI: 00:10.2 init
PCI: 00:10.3 init
PCI: 00:10.4 init
PCI: 00:11.0 init
Entering vt8237r_init.
vt8237r_init SATA LED.
vt8237r_init PCI Req.
vt8237r_init CPU Rst.
vt8237r_init Read Pass Write Ctrl.
vt8237r_init calling southbridge_init_common.
RTC Init
RTC: Checksum invalid zeroing cmos
Invalid CMOS LB checksum
Keyboard init...
Keyboard selftest failed ACK: 0xfe
Leaving vt8237r_init.
PNP: 002e.2 init
PNP: 002e.b init
PCI: 00:12.0 init
APIC_CLUSTER: 0 init
malloc Enter, size 1100, free_mem_ptr 00022898
malloc 00022898
Initializing CPU #0
CPU: vendor Centaur device 69a
CPU: family 06, model 09, stepping 0a
Using generic cpu ops (good)
Enabling cache
Setting fixed MTRRs(0-88) Type: UC
Setting fixed MTRRs(0-16) Type: WB
Setting fixed MTRRs(24-88) Type: WB
DONE fixed MTRRs
call enable_fixed_mtrr()
Setting variable MTRR 0, base: 0MB, range: 512MB, type WB
ADDRESS_MASK_HIGH=0xf
Setting variable MTRR 1, base: 512MB, range: 256MB, type WB
ADDRESS_MASK_HIGH=0xf
Setting variable MTRR 2, base: 768MB, range: 128MB, type WB
ADDRESS_MASK_HIGH=0xf
Setting variable MTRR 3, base: 896MB, range: 64MB, type WB
ADDRESS_MASK_HIGH=0xf
Zero-sized MTRR range @0KB
DONE variable MTRRs
Clear out the extra MTRR's
call enable_var_mtrr()
Leave x86_setup_var_mtrrs
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
Disabling local apic...done.
CPU #0 initialized
PCI: 00:10.5 init
PCI: 01:00.0 init
Copying BOCHS BIOS from 0xFFF90000 to 0xf000
Initializing VGA
INSTALL REAL-MODE IDT
DO THE VGA BIOS
found VGA: vid=1106, did=3118
VGA BIOS ROM base address: fff80000
bus/devfn = 0x100
biosint: INT# 0x1a
biosint: eax 0xb108 ebx 0x6b0100 ecx 0x301 edx 0x3000115
biosint: ebp 0x20fd2 esp 0xf7c edi 0x10008 esi 0x4677
biosint: ip 0xcbdc cs 0xc000 flags 0x46
0xb108: bus 1 devfn 0x0 reg 0x8 val 0x2
Devices initialized
Show all devs...After init.
Root Device: enabled 1, 0 resources
PCI_DOMAIN: 0000: enabled 1, 4 resources
PCI: 00:00.0: enabled 1, 0 resources
PCI: 00:00.1: enabled 1, 0 resources
PCI: 00:00.2: enabled 1, 0 resources
PCI: 00:00.3: enabled 1, 0 resources
PCI: 00:00.4: enabled 1, 0 resources
PCI: 00:00.7: enabled 1, 0 resources
PCI: 00:01.0: enabled 1, 0 resources
PCI: 00:0f.0: enabled 1, 6 resources
PCI: 00:0f.1: enabled 1, 1 resources
PCI: 00:10.0: enabled 1, 1 resources
PCI: 00:10.1: enabled 1, 1 resources
PCI: 00:10.2: enabled 1, 1 resources
PCI: 00:10.3: enabled 1, 1 resources
PCI: 00:10.4: enabled 1, 1 resources
PCI: 00:11.0: enabled 1, 1 resources
PNP: 002e.0: enabled 0, 3 resources
PNP: 002e.1: enabled 0, 3 resources
PNP: 002e.2: enabled 1, 2 resources
PNP: 002e.3: enabled 0, 2 resources
PNP: 002e.6: enabled 0, 2 resources
PNP: 002e.7: enabled 0, 3 resources
PNP: 002e.8: enabled 0, 1 resources
PNP: 002e.9: enabled 0, 1 resources
PNP: 002e.a: enabled 0, 1 resources
PNP: 002e.b: enabled 1, 2 resources
PCI: 00:11.5: enabled 0, 0 resources
PCI: 00:11.6: enabled 0, 0 resources
PCI: 00:12.0: enabled 1, 2 resources
APIC_CLUSTER: 0: enabled 1, 0 resources
APIC: 00: enabled 1, 0 resources
PCI: 00:10.5: enabled 1, 1 resources
PCI: 01:00.0: enabled 1, 3 resources
CPU: 00: enabled 1, 0 resources
High Tables Base is 3bff0000.
Copying Interrupt Routing Table to 0x000f0000... done.
Copying Interrupt Routing Table to 0x3bff0000... done.
ACPI: Writing ACPI tables at 3bff0400...
ACPI: * FACS
ACPI: * DSDT @ 3bff04a8 Length 3b8
ACPI: * FADT
ACPI: added table 1/8 Length now 40
ACPI: done.
Moving GDT to 0x3bff0c00...ok
Multiboot Information structure has been written.
Writing high table forward entry at 0x00000500
Wrote coreboot table at: 00000500 - 00000518 checksum b3df
New low_table_end: 0x00000518
Now going to write high coreboot table at 0x3bff1000
rom_table_end = 0x3bff1000
Adjust low_table_end from 0x00000518 to 0x00001000
Adjust rom_table_end from 0x3bff1000 to 0x3c000000
Adding high table area
Wrote coreboot table at: 3bff1000 - 3bff1698 checksum f4ab
elfboot: Attempting to load payload.
rom_stream: 0xfffa0000 - 0xfffdffff
Found ELF candidate at offset 0
header_offset is 0
Try to load at offset 0x0
malloc Enter, size 32, free_mem_ptr 00022ce4
malloc 00022ce4
New segment addr 0x100000 size 0x3a2410 offset 0xe0 filesize 0x1ac00
(cleaned up) New segment addr 0x100000 size 0x3a2410 offset 0xe0 filesize 0x1ac00
lb: [0x0000000000004000, 0x0000000000026000)
malloc Enter, size 32, free_mem_ptr 00022d04
malloc 00022d04
New segment addr 0x4a2420 size 0x48 offset 0x1ace0 filesize 0x48
(cleaned up) New segment addr 0x4a2420 size 0x48 offset 0x1ace0 filesize 0x48
lb: [0x0000000000004000, 0x0000000000026000)
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Loading Segment: addr: 0x0000000000100000 memsz: 0x00000000003a2410 filesz: 0x000000000001ac00
[ 0x0000000000100000, 000000000011ac00, 0x00000000004a2410) <- 00000000000000e0
Clearing Segment: addr: 0x000000000011ac00 memsz: 0x0000000000387810
Loading Segment: addr: 0x00000000004a2420 memsz: 0x0000000000000048 filesz: 0x0000000000000048
[ 0x00000000004a2420, 00000000004a2468, 0x00000000004a2468) <- 000000000001ace0
Loaded segments
verified segments
closed down stream
Jumping to boot code at 00100088
entry = 0x00100088
lb_start = 0x00004000
lb_size = 0x00022000
adjust = 0x3bfca000
buffer = 0x3bfac000
elf_boot_notes = 0x0001c000
adjusted_boot_notes = 0x3bfe6000
FILO version 0.6.0 (jon at localhost.localdomain) Tue Jul 14 16:23:39 BST 2009
ERROR: No such CMOS option (boot_devices)
menu: hda1:/filo/menu.lst
Booting 'hda1:/vmlinuz-2.6.25-14.fc9.i686 ro root=/dev/sda5 acpi=force console=
ttyS0,115200n8 initrd=hda1:/initrd-2.6.25-14.fc9.i686.img'
Found Linux version 2.6.25-14.fc9.i686 (mockbuild@) #1 SMP Thu May 1 06:28:41 E
DT 2008 (protocol 0x207) (loadflags 0x1) bzImage.
Setting up paramters at 0x90000
%016Lx - %016Lx (0)
%016Lx - %016Lx (4096)
%016Lx - %016Lx (786432)
%016Lx - %016Lx (1006567424)
ramtop=0x3c000000
ext_mem_k=64512, alt_mem_k=982016
original command line: "ro root=/dev/sda5 acpi=force console=ttyS0,115200n8 ini
trd=hda1:/initrd-2.6.25-14.fc9.i686.img"
kernel command line at 0x91000
initrd=hda1:/initrd-2.6.25-14.fc9.i686.img
kernel command line (51 bytes): "ro root=/dev/sda5 acpi=force console=ttyS0,115
200n8"
offset=0x3200 addr=0x100000 size=0x1fab60
Loading kernel... ok
start=0x3b9c7000 end=0x3bc4cc24
Loading initrd... ok
eip=0x100000
Jumping to entry point...
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.25-14.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Thu May 1 06:28:41 EDT 20
08
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000001000 type 16
BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 000000003bff0000 (usable)
BIOS-e820: 000000003bff0000 - 000000003c000000 type 16
63MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
Using x86 segment limits to approximate NX protection
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 245744
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 245744
DMI not present or invalid.
Using APIC driver default
ACPI: RSDP 000F0400, 0024 (r2 CORE )
ACPI: RSDT 3BFF0424, 0028 (r1 CORE RSDT 0 CORE 0)
ACPI: FACP 3BFF0860, 00F4 (r4 COREBO COREBOOT 0 CORE 2A)
ACPI: DSDT 3BFF04A8, 03B8 (r1 CBT-V2 CBT-DSDT 1 INTL 20061109)
ACPI: FACS 3BFF0468, 0040
ACPI: no DMI BIOS year, acpi=force is required to enable ACPI
ACPI: acpi=force override
ACPI: PM-Timer IO Port: 0x508
Allocating PCI resources starting at 40000000 (gap: 3c000000:c4000000)
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243825
Kernel command line: ro root=/dev/sda5 acpi=force console=ttyS0,115200n8
No local APIC present or hardware disabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07b9000 soft=c0799000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 800.075 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 966672k/982976k available (2236k kernel code, 15644k reserved, 1121k data, 284k init, 65472k highmem)
virtual kernel memory layout:
fixmap : 0xffc53000 - 0xfffff000 (3760 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc074f000 - 0xc0796000 ( 284 kB)
.data : 0xc062f37d - 0xc0747800 (1121 kB)
.text : 0xc0400000 - 0xc062f37d (2236 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 1602.22 BogoMIPS (lpj=801113)
Security Framework initialized
SELinux: Initializing.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 64K (32 bytes/line)
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0000)
CPU0: Centaur VIA Nehemiah stepping 0a
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
Time: 16:28:00 Date: 07/14/09
NET: Registered protocol family 16
No dock devices found.
ACPI FADT declares the system doesn't support MSI, so disable it
ACPI: bus type pci registered
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 0 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: 0xfb000000-0xfcffffff
PREFETCH window: 0x00000000f4000000-0x00000000f7ffffff
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2583k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1247588880.216:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: ACPI0007:00 is registered as cooling_device0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
agpgart: AGP aperture is 32M @ 0xf8000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 1:680:489
Freeing unused kernel memory: 284k freed
Write protecting the kernel read-only data: 908k
Red Hat nash version 6.0.52 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading ehci-hcd module
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
ACPI: PCI Interrupt 0000:00:10.4[C] -> <3>irq 12: nobody cared (try booting with the "irqpoll" option)
Pid: 345, comm: modprobe Not tainted 2.6.25-14.fc9.i686 #1
[<c045ccd8>] __report_bad_irq+0x2e/0x6f
[<c045cedb>] note_interrupt+0x1c2/0x21b
[<c045c574>] ? handle_IRQ_event+0x2a/0x5a
[<c045d53c>] handle_level_irq+0x8e/0xbe
[<c045d4ae>] ? handle_level_irq+0x0/0xbe
[<c0407eb4>] do_IRQ+0x98/0xc4
[<c04065e7>] common_interrupt+0x23/0x28
[<c042bfb7>] ? __do_softirq+0x5b/0xe7
[<c0407ddb>] do_softirq+0x74/0xb5
[<c045d4ae>] ? handle_level_irq+0x0/0xbe
[<c042bddd>] irq_exit+0x38/0x6b
[<c0407ec8>] do_IRQ+0xac/0xc4
[<c04065e7>] common_interrupt+0x23/0x28
[<c04282b7>] ? vprintk+0x2fc/0x330
[<c0531d5f>] ? acpi_pci_link_allocate_irq+0x199/0x1d6
[<c05adc9c>] ? eisa_set_level_irq+0x4c/0x66
[<c05320f6>] ? acpi_pci_irq_enable+0x165/0x1c4
[<c05ae897>] ? pcibios_enable_device+0x22/0x27
[<c04fdb84>] ? do_pci_enable_device+0x22/0x38
[<c04fdc01>] ? __pci_enable_device_flags+0x67/0x84
[<c04fdc2d>] ? pci_enable_device+0xf/0x11
[<c057e593>] ? usb_hcd_pci_probe+0x39/0x316
[<c04fea0f>] ? pci_match_device+0x8f/0x95
[<c04feac9>] ? pci_device_probe+0x39/0x59
[<c0562826>] ? driver_probe_device+0xa0/0x136
[<c0562935>] ? __driver_attach+0x79/0xaf
[<c05621d3>] ? bus_for_each_dev+0x3b/0x63
[<c05626cb>] ? driver_attach+0x14/0x16
[<c05628bc>] ? __driver_attach+0x0/0xaf
[<c0561ba4>] ? bus_add_driver+0x9d/0x1ba
[<c0562ab8>] ? driver_register+0x47/0xa7
[<c047592d>] ? __vunmap+0x93/0x9b
[<c04fec75>] ? __pci_register_driver+0x35/0x64
[<f882b025>] ? ehci_hcd_init+0x25/0x2b [ehci_hcd]
[<c0446f93>] ? sys_init_module+0x17be/0x18f6
[<c04d3577>] ? selinux_file_permission+0x100/0x106
[<c0571957>] ? usb_root_hub_lost_power+0x0/0x2f
[<c04cc41c>] ? security_file_permission+0xf/0x11
[<c04835e1>] ? sys_read+0x3b/0x60
[<c0405bf2>] ? syscall_call+0x7/0xb
=======================
handlers:
[<c0583513>] (i8042_interrupt+0x0/0x1e7)
Disabling IRQ #12
Link [LNKC] -> GSI 12 (level, low) -> IRQ 12
ehci_hcd 0000:00:10.4: VIA VLink IRQ fixup, from 0 to 12
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 12, io mem 0xfebffd00
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.25-14.fc9.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:10.4
Loading ohci-hcd module
Loading uhci-hcd module
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:10.0: VIA VLink IRQ fixup, from 0 to 10
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 10, io base 0x00000c00
uhci_hcd 0000:00:10.0: host system error, PCI problems?
uhci_hcd 0000:00:10.0: host controller halted, very bad!
uhci_hcd 0000:00:10.0: HC died; cleaning up
uhci_hcd 0000:00:10.0: USB bus 2 deregistered
ACPI: PCI interrupt for device 0000:00:10.0 disabled
uhci_hcd 0000:00:10.0: init 0000:00:10.0 fail, -108
uhci_hcd: probe of 0000:00:10.0 failed with error -108
ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:10.1: VIA VLink IRQ fixup, from 0 to 10
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 10, io base 0x00000c20
uhci_hcd 0000:00:10.1: host system error, PCI problems?
uhci_hcd 0000:00:10.1: host controller halted, very bad!
uhci_hcd 0000:00:10.1: HC died; cleaning up
uhci_hcd 0000:00:10.1: USB bus 2 deregistered
ACPI: PCI interrupt for device 0000:00:10.1 disabled
uhci_hcd 0000:00:10.1: init 0000:00:10.1 fail, -108
uhci_hcd: probe of 0000:00:10.1 failed with error -108
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.2: VIA VLink IRQ fixup, from 0 to 11
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.2: irq 11, io base 0x00000c40
uhci_hcd 0000:00:10.2: host system error, PCI problems?
uhci_hcd 0000:00:10.2: host controller halted, very bad!
uhci_hcd 0000:00:10.2: HC died; cleaning up
uhci_hcd 0000:00:10.2: USB bus 2 deregistered
ACPI: PCI interrupt for device 0000:00:10.2 disabled
uhci_hcd 0000:00:10.2: init 0000:00:10.2 fail, -108
uhci_hcd: probe of 0000:00:10.2 failed with error -108
ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.3: VIA VLink IRQ fixup, from 0 to 11
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.3: irq 11, io base 0x00000c60
uhci_hcd 0000:00:10.3: host system error, PCI problems?
uhci_hcd 0000:00:10.3: host controller halted, very bad!
uhci_hcd 0000:00:10.3: HC died; cleaning up
uhci_hcd 0000:00:10.3: USB bus 2 deregistered
ACPI: PCI interrupt for device 0000:00:10.3 disabled
uhci_hcd 0000:00:10.3: init 0000:00:10.3 fail, -108
uhci_hcd: probe of 0000:00:10.3 failed with error -108
Loading ext2 module
Loading scsi_mod module
SCSI subsystem initialized
Loading sd_mod module
Driver 'sd' needs updating - please use bus_type methods
Loading libata module
Loading sata_via module
ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
sata_via 0000:00:0f.0: VIA VLink IRQ fixup, from 0 to 11
sata_via 0000:00:0f.0: routed to hard irq line 11
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0xca0 ctl 0xcb0 bmdma 0xc80 irq 11
ata2: SATA max UDMA/133 cmd 0xca8 ctl 0xcb4 bmdma 0xc88 irq 11
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: ST9120822AS, 3.ALC, max UDMA/133
ata1.00: 234441648 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.AL PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
SELEX Sensors and Airborne Systems Limited
Registered Office: Sigma House, Christopher Martin Road, Basildon, Essex SS14 3EL
A company registered in England & Wales. Company no. 02426132
********************************************************************
This email and any attachments are confidential to the intended
recipient and may also be privileged. If you are not the intended
recipient please delete it from your system and notify the sender.
You should not copy it or use it for any purpose nor disclose or
distribute its contents to any other person.
********************************************************************
More information about the coreboot
mailing list