[coreboot] [GSoC] option rom problems with DBM690T+VT6202L
Peter Stuge
peter at stuge.se
Wed Jul 29 03:58:53 CEST 2009
Jason Wang wrote:
> The card has two UHCI controller and one EHCI controller.
Note that it is not in fact a UHCI controller if it supports USB 2.0.
It is difficult (maybe impossible) to find a UHCI PCI card.
An EHCI controller will only and always communicate with high-speed
devices using EHCI.
The EHCI controller and it's so-called companion controllers do not
mirror each port. Any connected device will only appear attached to
one controller, and it will always be the same controller for a given
device and a given physical port.
In other words, for you to be able to use UHCI with this PCI card,
you must attach a USB 1.1-only MSC device to one of the ports.
Please have a look at the EHCI standard[1] for more details, and feel
free to ask questions. Especially Figure 1-1 and the descriptions on
the same page (3) are very good for getting a better understanding of
these parts of USB.
//Peter
[1] http://www.intel.com/technology/usb/download/ehci-r10.pdf
More information about the coreboot
mailing list