[coreboot] Fwd: Re: ACPI support on M57SLI

[Florentin Demetrescu]

----- Forwarded message from Florentin Demetrescu <echelon at free.fr> -----
    Date: Mon, 15 Jun 2009 01:36:40 +0200
    From: Florentin Demetrescu <echelon at free.fr>
Reply-To: Florentin Demetrescu <echelon at free.fr>
 Subject: Re: [coreboot] ACPI support on M57SLI
      To: Harald Gutmann <harald.gutmann at gmx.net>

Quoting Harald Gutmann <harald.gutmann at gmx.net>:
> 1. check dmesg for error related to acpi.
1) output of "dmesg | grep -i acpi" :
[    0.000000] ACPI: RSDP (v002 CORE                                  ) @
0x00000000000f0400
[    0.000000] ACPI: RSDT (v001 CORE   RSDT     0x00000000 CORE 0x00000000) @
0x00000000000f0424
[    0.000000] ACPI: FADT (v001    GBT COREBOOT 0x00000000 iasl 0x00000000) @
0x00000000000f0ea1
[    0.000000] ACPI: HPET (v001 CORE   AMD64    0x00000000 CORE 0x00000000) @
0x00000000000f0f95
[    0.000000] ACPI: MADT (v001 CORE   MADT     0x00000000 CORE 0x00000000) @
0x00000000000f0fcd
[    0.000000] ACPI: MCFG (v001 CORE   MCFG     0x00000000 CORE 0x00000000) @
0x00000000000f1035
[    0.000000] ACPI: SRAT (v001 CORE   SRAT     0x00000000 CORE 0x00000000) @
0x00000000000f1061
[    0.000000] ACPI: SLIT (v001 CORE   SLIT     0x00000000 CORE 0x00000000) @
0x00000000000f1101
[    0.000000] ACPI: SSDT (v002 CORE   DYNADATA 0x0000002a GENA 0x0000002a) @
0x00000000000f112e
[    0.000000] ACPI: DSDT (v001 LXBIOS LXB-DSDT 0x00000001 INTL 0x20061109) @
0x0000000000000000
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xf4144000] gsi_base[0])
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: HPET id: 0x102282a0 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[   62.311421] ACPI: Core revision 20060707
[   62.315513] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found,
using machine DSDT.
[   63.283765] ACPI: bus type pci registered
[   63.293822] ACPI: Interpreter enabled
[   63.297542] ACPI: Using IOAPIC for interrupt routing
[   63.302810] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   63.313534] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   63.315525] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEBF._PRT]
[   63.315600] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEBE._PRT]
[   63.315656] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEBD._PRT]
[   63.315713] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEBC._PRT]
[   63.315772] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEBB._PRT]
[   63.315830] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEBA._PRT]
[   63.315888] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCID._PRT]
[   63.321951] pnp: PnP ACPI init
[   63.325291] pnp: PnP ACPI: found 3 devices
[   63.329495] PCI: Using ACPI for IRQ routing
[   66.951600] ACPI: (supports S0 S5)
[   67.605130] ACPI: PCI Interrupt 0000:00:02.1[B] -> GSI 23 (level, low) -> IRQ
23
[   68.611707] ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 18 (level, low) -> IRQ
18
[   68.681455] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 20 (level, low) -> IRQ
20
[   69.219295] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 22 (level, low) -> IRQ
22
[   69.436130] ACPI: PCI Interrupt 0000:01:07.0[A] -> GSI 19 (level, low) -> IRQ
19
[   69.504130] ACPI: PCI Interrupt 0000:00:05.0[A] -> <6>eth1: Digital
DS21142/DS21143 Tulip rev 48 at Port 0x1000, 08:00:2B:C3:50:3B, IRQ 19.
[   70.228005] ACPI: PCI Interrupt 0000:00:05.1[B] -> GSI 21 (level, low) -> IRQ
21
[   70.934620] ACPI: PCI Interrupt 0000:00:05.2[C] -> GSI 22 (level, low) -> IRQ
22
[   81.373687] ACPI: PCI Interrupt 0000:00:06.1[B] -> GSI 23 (level, low) -> IRQ
23
[   89.176132] ibm_acpi: ec object not found
[   89.368539] ACPI: Power Button (FF) [PWRF]
[   89.753690] pcc_acpi: loading...

> 2. check soft-power-off
2) It works!

> 3. check PowerNow! (modprobe powernow-k8)
> 	http://www.twibble.org/Articles/amd-x2-powernow (overview)
3) output of "dmesg | grep -i power" :
[   89.368516] input: Power Button (FF) as /class/input/input3
[   89.368539] ACPI: Power Button (FF) [PWRF]
[   90.021841] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor
3800+ processors (version 2.00.00)
[   90.021890] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0xa
[   90.021894] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xc
[   90.021897] powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
[   90.021935] powernow-k8: ph2 null fid transition 0xc
Moreover, when monitoring the CPU frequency with ksysguard (I have a KDE
desktop), after launching a CPU-intensive process (like a "dd if=/dev/urandom
of=/dev/null"), one can see the CPU frequency jump from 1000 MHz to 2000 MHhz.

> 4. check HPET (works with coreboot, but not with proprietary bios ;))
4) Dunno how to (functionaly) test this.. Anyway dmesg says :
[    0.000000] ACPI: HPET (v001 CORE   AMD64    0x00000000 CORE 0x00000000) @
0x00000000000f0f95
[    0.000000] ACPI: HPET id: 0x102282a0 base: 0xfed00000

> 5. review my patch
Done. No remarks. :)

I did all these tests with an old ubuntu (feisty 7.04), with a 2.6.20 kernel. If
 more tests are needed in order to validate the Harald's patch, tell me and I
will upgrade my kernel next week.

Regards,
 Florentin


----- End forwarded message -----