[coreboot] SeaBIOS not running vga rom
Joseph Smith
joe at settoplinux.org
Tue May 12 14:02:21 CEST 2009
On Tue, 12 May 2009 12:53:43 +0200, Rudolf Marek <r.marek at assembler.cz>
wrote:
> Hi,
>
> You can either use LGPL VGA bios from http://www.nongnu.org/vgabios/ (use
> VGA
> only image) or you can use vga bios from kevin just right in the Seabios.
I don't know if this is an option, I don't want it to mess with any of the
vga registers already set by coreboot.
> But if you dont need any - I use SeaBIOS without any option ROMs and it
> works
> too. (grub boots and boots kernel)
>
Ok, but do you have vga output or just serial console.
Will SeaBIOS know vga has already been initialized and send output to the
vga screen?
--
Thanks,
Joseph Smith
Set-Top-Linux
www.settoplinux.org
More information about the coreboot
mailing list