[coreboot] #137: S2895 no function after coreboot 2 flash

[coreboot]

#137: S2895 no function after coreboot 2 flash
--------------------------+-------------------------------------------------
    Reporter:  anonymous  |          Type:  defect           
      Status:  new        |      Priority:  major            
   Milestone:             |     Component:  buildrom         
     Version:  v2         |      Keywords:                   
Dependencies:             |   Patchstatus:  there is no patch
--------------------------+-------------------------------------------------

Comment(by anonymous):

 Replying to [comment:3 anonymous]:
 > Hi Myles,
 >
 > Thanks a lot for your fast response.
 > So you are saying that the problem seems to be that i am using a SATA
 HDD?
 It wasn't getting that far.

 > About my current config:
 >
 > I am using the TYAN S2895 with 2 SATA HDDs. first one has Windows on it
 and the second one is using Suse 11.1. Grub is installed on the first SATA
 HDD with the Windows.
 >
 > Any chance to get both OS to work at the same time?
 Booting at the same time isn't a problem, but s2895 needs some ACPI help
 before Windows will boot.  SeaBIOS will find Grub and it will just work
 for you once Windows boots on s2895.

 Try it again and when you do make configure, select Payload
 Configuration->Enable LZMA Compression.  That's the way I tried it.  ACPI
 works well enough for Ubuntu...

 Thanks,
 Myles

-- 
Ticket URL: <http://tracker.coreboot.org/trac/coreboot/ticket/137#comment:5>
coreboot <http://www.coreboot.org/>