[coreboot] [v2] r4772 - trunk/coreboot-v2/src/southbridge/amd/sb600
svn at coreboot.org
svn at coreboot.org
Wed Oct 14 04:56:01 CEST 2009
Author: zbao
Date: 2009-10-14 04:56:00 +0200 (Wed, 14 Oct 2009)
New Revision: 4772
Modified:
trunk/coreboot-v2/src/southbridge/amd/sb600/sb600_hda.c
trunk/coreboot-v2/src/southbridge/amd/sb600/sb600_sata.c
Log:
delete white trailing spaces. It is done by the perl command.
sh> perl -pi -e 's/[[:blank:]]+$//' $files
Trivial.
Signed-off-by: Zheng Bao <zheng.bao at amd.com>
Acked-by: Zheng Bao <zheng.bao at amd.com>
Modified: trunk/coreboot-v2/src/southbridge/amd/sb600/sb600_hda.c
===================================================================
--- trunk/coreboot-v2/src/southbridge/amd/sb600/sb600_hda.c 2009-10-14 02:38:24 UTC (rev 4771)
+++ trunk/coreboot-v2/src/southbridge/amd/sb600/sb600_hda.c 2009-10-14 02:56:00 UTC (rev 4772)
@@ -42,8 +42,8 @@
dword |= val;
writel(dword, port);
- /* Wait for readback of register to
- * match what was just written to it
+ /* Wait for readback of register to
+ * match what was just written to it
*/
count = 50;
do {
@@ -64,11 +64,11 @@
u32 dword;
/* Set Bit0 to 0 to enter reset state (BAR + 0x8)[0] */
- if (set_bits(base + 0x08, 1, 0) == -1)
+ if (set_bits(base + 0x08, 1, 0) == -1)
goto no_codec;
/* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */
- if (set_bits(base + 0x08, 1, 1) == -1)
+ if (set_bits(base + 0x08, 1, 1) == -1)
goto no_codec;
/* Delay for 1 ms since the BKDG does */
@@ -79,7 +79,7 @@
dword &= 0x0F;
if (!dword)
goto no_codec;
-
+
return dword;
no_codec:
@@ -271,10 +271,10 @@
struct resource *res;
u32 codec_mask;
device_t sm_dev;
-
+
/* Enable azalia - PM_io 0x59[4], disable ac97 - PM_io 0x59[1..0] */
pm_iowrite(0x59, 0xB);
-
+
/* Find the SMBus */
/* FIXME: Need to find out why the call below crashes. */
/*sm_dev = dev_find_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_ATI_SB600_SM, 0);*/
@@ -294,8 +294,8 @@
pci_write_config32(dev, 0x2c, dword);
/* Read in BAR */
- /* Is this right? HDA allows for a 64-bit BAR
- * but this is only setup for a 32-bit one
+ /* Is this right? HDA allows for a 64-bit BAR
+ * but this is only setup for a 32-bit one
*/
res = find_resource(dev, 0x10);
if (!res)
Modified: trunk/coreboot-v2/src/southbridge/amd/sb600/sb600_sata.c
===================================================================
--- trunk/coreboot-v2/src/southbridge/amd/sb600/sb600_sata.c 2009-10-14 02:38:24 UTC (rev 4771)
+++ trunk/coreboot-v2/src/southbridge/amd/sb600/sb600_sata.c 2009-10-14 02:56:00 UTC (rev 4772)
@@ -185,14 +185,14 @@
byte = readb(sata_bar5 + 0x12C + 0x80 * i);
/* Set Reset Bit and 1.5g bit */
- byte |= 0x11;
+ byte |= 0x11;
writeb(byte, (sata_bar5 + 0x12C + 0x80 * i));
-
- /* Wait 1ms */
- mdelay(1);
+ /* Wait 1ms */
+ mdelay(1);
+
/* Clear Reset Bit */
- byte &= ~0x01;
+ byte &= ~0x01;
writeb(byte, (sata_bar5 + 0x12C + 0x80 * i));
/* Wait 1ms */
More information about the coreboot
mailing list