[coreboot] [Fwd: Re: [Fwd: Re: arima hdama problem]]

[Hugh Greenberg]

Do you to mean apply your last patch without the

do { ... timeout++;} while(((start - value) < ticks) && (timeout < 
1000000));

in apic_timer.c ?

-- 
Hugh Greenberg




Myles Watson wrote:
>> Below is the output with the no_smp patch and the previous patch.  Is
>> there another problem since the payload is not being loaded?
>>     
> There's definitely some problem.  It hangs before the devices are enumerated
> :(
>  
>   
>> coreboot-2.3 Tue Oct 20 16:46:25 MDT 2009 starting...
>> Enabling routing table for node 00 done.
>> Enabling UP settings
>> Disabling read/write/fill probes for UP... done.
>> Ram2.00
>> Enabling dual channel memory
>> coreboot-2.3 Tue Oct 20 16:46:25 MDT 2009 booting...
>> POST: 0x40
>> Enumerating buses...
>> Show all devs...Before Device Enumeration.
>> Root Device: enabled 1, 0 resources
>> APIC_CLUSTER: 0: enabled 1, 0 resources
>> APIC: 00: enabled 1, 0 resources
>> PCI_DOMAIN: 0000: enabled 1, 0 resources
>> PCI: 00:18.0: enabled 1, 0 resources
>>     
> ...
>   
>> PCI: 00:1e.0, bad id 0xffffffff
>> PCI: 00:1f.0, bad id 0xffffffff
>> POST: 0x25
>>     
> This is another strange place to hang.  I don't understand why it would hang
> here.  It's probably time to put a few print statements around there and see
> if we can get it to go a little farther.
>
> Have you tried it with the init call, but not the timeout?  It would be nice
> if we could say that bug was squashed and we could move on.  If init wasn't
> the problem, we should probably figure out why you can't get to the lapic
> before we move on.
>
> Thanks,
> Myles
>
>