[coreboot] [PATCH]some kconfig fixes
Stefan Reinauer
stepan at coresystems.de
Thu Sep 24 10:59:14 CEST 2009
Patrick Georgi wrote:
> Hi,
>
> attached patch fixes most Kconfig boards (as tested with kbuildall).
>
> Specifically:
> - CONFIG_SMP is always set (to 'n' if MAX_CPUS==1)
> - HT_CHAIN_{END,}_UNIT_BASE is defined (probably at the wrong location,
> but please move it later. src/Kconfig is a good generic place to put
> stuff in that should be moved, imho)
> - via/c3 is hooked up to the build
> - mitac and soyo boards are hooked up to the build
> - emulation/qemu-x86 is "normal form" now, so kbuildall picks it up
> - three via boards were missing some definitions. FALLBACK_SIZE is a
> dummy until the via-specific vgabios handling code is either cleaned
> up or eliminated
> - RAMBASE at 0x4000 for via boards is necessary due to the via-specific
> vgabios handling code. see above.
> - kbuildall supports building a single board now, eg.
> util/kbuildall/kbuildall emulation/qemu-x86
> This is useful to quickly test changes to a board with the same
> default config that kbuildall usually uses.
>
> Signed-off-by: Patrick Georgi <patrick.georgi at coresystems.de>
>
>
Acked-by: Stefan Reinauer <stepan at coresystems.de>
--
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.de • http://www.coresystems.de/
Registergericht: Amtsgericht Freiburg • HRB 7656
Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866
More information about the coreboot
mailing list