[coreboot] Asus M2V-TVM....

Rudolf Marek r.marek at assembler.cz
Sun Apr 11 11:55:48 CEST 2010


Hi,

Please post output of superio tool in verbose mode. Maybe you need to set input 
to the ITE if it is 48Mhz or 24Mhz, usually it is some bit in CR20-2f

I dont have any POST card so i  dont know how the IO is routed.

Also provide lspci -vvvxxx

Check if your image contains following at the end:

0007ff80  aa 00 44 50 c2 0f 97 61  aa 00 44 50 c2 0f 97 61  |..DP...a..DP...a|
0007ff90  aa 00 44 50 c2 0f 97 61  aa 00 44 50 c2 0f 97 61  |..DP...a..DP...a|
0007ffa0  aa 00 44 50 c2 0f 97 61  00 00 00 00 00 00 00 00  |..DP...a........|
0007ffb0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
0007ffc0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
0007ffd0  80 ff 0f 00 ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
0007ffe0  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
0007fff0  e9 11 00 ff ff 00 00 00  e9 5f 00 ff d0 ff fd ff  |........._......|
00080000

Rudolf




More information about the coreboot mailing list