[coreboot] Asus M2V-TVM....

[Chi Min Wang]

Rudolf Marek wrote:
> Hi,
>
> Please post output of superio tool in verbose mode. Maybe you need to 
> set input to the ITE if it is 48Mhz or 24Mhz, usually it is some bit 
> in CR20-2f
>
> I dont have any POST card so i  dont know how the IO is routed.
>
> Also provide lspci -vvvxxx
>
Hi,here is the lspci/superiotool dump....
> Check if your image contains following at the end:
>
> 0007ff80  aa 00 44 50 c2 0f 97 61  aa 00 44 50 c2 0f 97 61  
> |..DP...a..DP...a|
> 0007ff90  aa 00 44 50 c2 0f 97 61  aa 00 44 50 c2 0f 97 61  
> |..DP...a..DP...a|
> 0007ffa0  aa 00 44 50 c2 0f 97 61  00 00 00 00 00 00 00 00  
> |..DP...a........|
> 0007ffb0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  
> |................|
> 0007ffc0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  
> |................|
> 0007ffd0  80 ff 0f 00 ff ff ff ff  ff ff ff ff ff ff ff ff  
> |................|
> 0007ffe0  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  
> |................|
> 0007fff0  e9 11 00 ff ff 00 00 00  e9 5f 00 ff d0 ff fd ff  
> |........._......|
> 00080000
I didn't see such struct in my image,so maybe it's related to IRQ 
routing?? 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: m2v-tvm-1.txt.bz2
Type: application/octet-stream
Size: 7377 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20100412/7d4e5587/attachment.obj>