[coreboot] mainboard.c: init() still being called?
stefan.reinauer at coresystems.de
Mon Aug 16 20:14:12 CEST 2010
On 8/16/10 7:11 PM, Peter Stuge wrote:
> Stefan Reinauer wrote:
>>>> mainboard specific setup code is critical for many boards.
>>> What does it do?
>> On some boards it sets up the fans.
>> On others it makes sure the display brightness is initialized
> What determines the correct way to do those tasks? Is it really
> mainboard specific; ie. circuit design?
Yes. Hence they're done in mainboard.c
Some of them _might_ live in mainboard.c because creating a new
framework like a "display brightness framework" into coreboot and
writing a driver for whatever actual hardware controls brightness just
for getting one value written into one register didn't seem appropriate
at the time. So in the end it makes life easier for porters and readers
than having to cope with yet another framework.
> Even if there is a unique
> supporting circuit on the boards, the chips that we talk to from
> software will only have a finite ways they can work, so we should
> always be able to use parameters..
Yes. But you have to weigh things up. While there might be a "formula
for everything" it might not be the most effective way to solve one
given problem, even if the model sounds nicer in theory.
>> Sometimes it installs board specific interrupt handlers for oprom
> Thanks, I "forgot" about that one. :) What makes those interrupt
> handlers board specific though? What they return might also be
> easy to control by simple parameters.
That might be very different things, like how wide the graphics bus is
or how fast it can be clocked based on how the mainboard designed layed
out the wires. Or whether the board has a TV-Out that should be selected.
I agree a lot of this _could_ go into the config / device tree, but
right now there are bigger drawbacks one could fight if going for a
Such as putting interrupt routing information in there.
Maybe even dropping the idea of "register" in sconfig completely and
coming up with something better.
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.de • http://www.coresystems.de/
Registergericht: Amtsgericht Freiburg • HRB 7656
Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866
More information about the coreboot