[coreboot] Serial Console only starts after reset
Stefan Reinauer
stepan at coresystems.de
Tue Jun 15 16:16:46 CEST 2010
On 6/15/10 4:07 PM, Joseph Smith wrote:
> When
> I cold boot it, if I hit the reset button before Linux starts, it restarts
> with coreboot serial console just fine.
>
Hm...
Maybe 0x2e/0x4e are mapped to LPC after the SuperIO is configured (and
that mapping survives a reset)... that would be a southbridge init issue.
Or, the hardware has to stabilize after power on before you can
configure the SuperIO.
Stefan
More information about the coreboot
mailing list