[coreboot] Jetway PA78VM5 porting problems
Qing Pei Wang
wangqingpei at gmail.com
Sat Jun 26 10:27:11 CEST 2010
you are right, the max_devfn is 0xff. I do not know what caused this.
On Fri, Jun 25, 2010 at 11:20 AM, Myles Watson <mylesgw at gmail.com> wrote:
> On Thu, Jun 24, 2010 at 4:55 PM, Qing Pei Wang <wangqingpei at gmail.com>
> > hi all,
> > my PA78VM5 which is 780V+700 . coreboot contiued alloc memory while
> > PCI enumerating. the log is attached
> > any suggestion would be fine for me to try.
> Could you put in some debugging print statements in pci_scan_bus?
> right after this line:
> printk(BIOS_DEBUG, "PCI: pci_scan_bus for bus %02x\n", bus->secondary);
> printk(BIOS_DEBUG, “pci_scan_bus min_devfn %x max_devfn %x \n”,
> min_devfn, max_devfn);
> The max_devfn should be < 0x18 so that the fam10 doesn’t get
> enumerated again. It looks like you're not getting out of the loop.
Wang Qing Pei
MSN:wangqingpei at hotmail.com <MSN%3Awangqingpei at hotmail.com>
Gmail:wangqingpei at gmail.com <Gmail%3Awangqingpei at gmail.com>
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the coreboot