[coreboot] Porting to RS780/SB700 board

[Rudolf Marek]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Rudolf Marek wrote:
> I found that in k8 CAR set_var_mtrr is set as it the arguments would be an
> adresses, but in fact they HAVE TO be in kilobytes.

Hi again,

I re-checked and it was OK, we do have an early function with same name which
takes bytes parameters (mtrr-early.c). So this is not the case. I investigated
MTRRs bit more.

The RAM init on AMD does not use the varmtrr0 and varmtrr1 the reason is that it
thinks the first is used for 0-RAMBASE second for ROM caching.

I also changed the XIP MTRR setup to cache whole ROM with the MTRR. I think it
is OK to do it this way...

After the code goes to the post_cache_as_ram.c it sets up an mtrr for the
coreboot_ram as 0-RAMTOP. Maybe we can go with a big mtrr 0-TOM and create UCs
for VGA....

Thanks,
Rudolf




-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iEYEARECAAYFAkveAJ8ACgkQ3J9wPJqZRNVDnwCZAariG5FhnCoDs9Nx2H7JAJeq
1rAAnRMKFMYD+EwhlOfotaufe/s2kOIU
=GILC
-----END PGP SIGNATURE-----