[coreboot] FILO bug disk not seen at ata-0 (Doesn't try to detect on ATA only SIL3114)

[Joop Boonen]

On Thu, May 6, 2010 11:56 am, Joop Boonen wrote:
> On Thu, May 6, 2010 11:35 am, Joop Boonen wrote:
>> All,
>>
>> I have an issue with FILO the disk at ata-0 isn't seen.
>
I've been trying some more. I've used the old IDE in FILO. It now
recognises the drive connected to the SIL3114. But still not the ATA
drive.

> I saw that it only tries to find disk connected at the SIL3114 controller
> (1095:3114 pci_1095_3114 SiI 3114 [SATALink/SATARaid] Serial ATA
> Controller) not the pata in the chipset (pci_1022_7469 AMD-8111 IDE).
> I've attached the session log also to this ticket including the hwinfo as
> presented by openSuSE.
>
>>
>> When is use SEABIOS it's detected properly.
>>
>> I've attached session log with all debugging for FILO enabled.
>>
>> Regards,
>>
>> Joop.--
>> coreboot mailing list: coreboot at coreboot.org
>> http://www.coreboot.org/mailman/listinfo/coreboot
> --
> coreboot mailing list: coreboot at coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot