[coreboot] Re Dell Optiplex GX1 support

[Cooper Harrison]

the bios chip is built into the board, but would the bios bootblock not
work? is there any way to check for a bootblock? this is a good computer and
I do not want to kill it.

On Mon, May 10, 2010 at 12:31 PM, Anders Jenbo <anders at jenbo.dk> wrote:

> To improve the support a bit navigate to coreboot/util/getpir/ and run
> make, then run ./getpir (on the GX1), this will generate a irq_tables.c
> file. Copy it to your folder, and add the following to the first section
> of your Kconfig.
>
>        select HAVE_PIRQ_TABLE
>
> Once you have done this you should be ready to compile CoreBoot and
> flash it on to your board.
> If the flashing fails or the compiled ROM doesn't work for your board
> could be unable to boot, so it is strongly recommended that you find or
> buy a similar ROM chip so that you have a working backup in case
> something goes wrong.
>
> -Anders
>
>


-- 
Cooper
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20100510/adc22d97/attachment.html>