[coreboot] 回复: Advice how to install Linux to get it working with FILO

wangqingpei@gmail.com wangqingpei at gmail.com
Wed May 19 01:46:39 CEST 2010


Hi
Grub command is fine, what is your problem about filo?  send the log if you can

Wang Qing Pei 
Mail: wangqingpei at gmail.com
Phone:86+013426369984


----- Reply message -----
发件人: "Joop Boonen" <joop_boonen at web.de>
日期: 周三, 5 月 19 日, 2010 年 07:09
主题: [coreboot] Advice how to install Linux to get it working with FILO
收件人: <coreboot at coreboot.org>

Hello All,

I want to get FILO working on my system (arima/hdama).
As I want to rule out my Linux installation I have a few questions.
I've installed openSuSE 11.2 x86_64 on a SATA disk connected to the on
board SIL3114 controller.

I have the follwoing partitioning.
1) /boot about 128 MB
2) swap about 2 GB
3) /root about 60GB
4) /home about 20GB

Is this OK or is there also a track maximum for FILO like existed for LILO?
Is it best to configure FILO with grub commands?

Regards,

Joop.


-- 
coreboot mailing list: coreboot at coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20100519/aa036a26/attachment.html>


More information about the coreboot mailing list