[coreboot] gPXE not found?!

[Knut Kujat]

Hello,

#define CONFIG_PCI_ROOT1 0x0a worked just fine, perfect you could say :).
Everything working now like it should!
Thanks again and again ....
Bye,
Knut Kujat




Myles Watson escribió:
> On Wed, May 19, 2010 at 7:20 AM, Stefan Reinauer
> <stefan.reinauer at coresystems.de> wrote:
>   
>> Knut, try putting the southbridge on bus 0
>>     
> I think it is already there, but there is also an 8132 at bus 8.
>
>   
>>>> using genroms/gpxe.rom makes gPXE start but then gPXE isn't able to find
>>>> the network devices. When I'm using the vendor and device id
>>>> (pci8086,1079.rom) Seabios doesn't map that option rom to the NICs
>>>> because  Seabios doesn't see them! (please see attached log)
>>>>
>>>> What can I do? to scan also 0a:03.0 and 0a:03.1, which would be my NICs?
>>>>         
>>> Have you tried adding the root bus 0x0a to config.h?
>>>       
>
> I should have said bus 8.  From your lspci:
>
> -+-[0000:08]-+-01.0-[09]--
>  |           +-01.1  Advanced Micro Devices [AMD] AMD-8132 PCI-X
> IOAPIC [1022:7459]
>  |           +-02.0-[0a]--+-03.0  Intel Corporation 82546GB Gigabit
> Ethernet Controller [8086:1079]
>  |           |            \-03.1  Intel Corporation 82546GB Gigabit
> Ethernet Controller [8086:1079]
>  |           \-02.1  Advanced Micro Devices [AMD] AMD-8132 PCI-X
> IOAPIC [1022:7459]
>
> If that lspci doesn't match the enumeration that Coreboot gives it,
> use the one that matches your boot logs.
>
> Thanks,
> Myles
>