[coreboot] Wyse S10 Information

[Nils]

Oliver wrote:
>The reason why it's not working now, is because I get a message from
>the pata_cs5536 driver that IDE is disabled by the bios; and of course
>no option to enable it.

This is the same problem i had with the S50.
The problem is that the bios has configured the CS5536 for flash(board).
You have to enable the flash driver in the kernel(MTD? i think)
It is not a usual ide device.

>Also, I can boot a Ubuntu 10.04 USB stick (syslinux basically) and pxe
>with the module present, but I cannot seem to boot a USB stick with
>just grub on it, if the IDE module is in place. I think grub tries to
>probe the IDE device, but fails or is on an extremly long timeout.
>Strings revealed usernames, hostnames etc used by the OS/rdp/ica
>clients in the bios.rom I extracted; I cannot belive a flash image
>somewhere would write it's information into the flash chip. I'm very
>convinced that wyse OS is somewhere in the 2Megabyte flash and (even
>according to the specs) that is all that is available to the
>thinclient.

Ok the flashrom chip in the S50 is 256KB.
In the S50 only the bios is in the chip.
The operating system "Linux v6" is on the flashboard. 

Nils.