[coreboot] [PATCH] [RFC] sata PHY settings callback on SB700
Rudolf Marek
r.marek at assembler.cz
Fri Sep 17 16:48:38 CEST 2010
Hi from Fort Worth,
Here is a proposed way how to handle the SATA PHY settings on SB700. It consists
of weak function which always exists (with defaults) and a possibility to
override this with normal function in main.c. This is the other way of doing
that and not using the devictree.cb.
Please tell if it is ok this way. I suggest all people who ported SB700 should
have a look on their SATA PHY settings too because it is most likely PCB/MB
dependent.
This patch is not tested but it could work.
Signed-off-by: Rudolf Marek <r.marek at assembler.cz>
My holiday ends soonish but I temped to do bit of stuff during El Paso - Forth
Worth ride ;)
Thanks,
Rudolf
-------------- next part --------------
A non-text attachment was scrubbed...
Name: sata.patch
Type: text/x-diff
Size: 4157 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20100917/20e2afc4/attachment.bin>
More information about the coreboot
mailing list