[coreboot] HP Proliant dl145 g3 Can't read Boot disk
Kevin O'Connor
kevin at koconnor.net
Mon Feb 21 20:01:01 CET 2011
On Mon, Feb 21, 2011 at 06:16:55PM +0200, Alex G. wrote:
> On 02/21/2011 03:53 PM, Kevin O'Connor wrote:
> > The log shows SeaBIOS found an ATA controller, but did not find any
> > drives attached to the controller. It did not find an option rom on
> > any cards - so no scsi option rom was run.
> >
> He removed the SAS card from the system, as running its option ROM would
> freeze the boot process.
A boot log with debug level set to 8 from that event would be helpful.
[...]
> The coreboot log does show the SATA controller to be initialized (if I
> am reading it correctly).
>
> PCI: 01:0e.0 [1166/024a] ops
> PCI: 01:0e.0 [1166/024a] enabled
> malloc Enter, size 68, free_mem_ptr 00150224
> malloc 00150224
> PCI: 01:0e.1 [1166/024a] ops
> PCI: 01:0e.1 [1166/024a] enabled
> POST: 0x25
>
> The 1166:024a is the SATA controller.
It doesn't look like the class field of that pci device identified
itself as ATA or AHCI. (SeaBIOS just skipped over the device.)
> > Can you post the output of lspci and identify which device you
> > expected to boot from?
> >
> Better lspci -nn ?
Yeah - actually "lspci -vnn" would be better.
-Kevin
More information about the coreboot
mailing list