[coreboot] [PATCH] Add new ec subdir for Embedded Controllers
Sven Schnelle
svens at stackframe.org
Wed Jan 19 11:23:29 CET 2011
Stefan Reinauer <stefan.reinauer at coreboot.org> writes:
> * Sven Schnelle <svens at stackframe.org> [110117 21:46]:
>> Index: src/ec/acpi/ec.h
>> ===================================================================
>> --- src/ec/acpi/ec.h (revision 0)
>> +++ src/ec/acpi/ec.h (working copy)
>> @@ -17,9 +17,11 @@
>> * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
>> */
>>
>> -#ifndef _MAINBOARD_EC_H
>> -#define _MAINBOARD_EC_H
>> +#ifndef _EC_ACPI_H
>> +#define _EC_ACPI_H
>>
>> +#include "chip.h"
> Is chip.h needed ?
No, i removed it now.
>> +
>> #define EC_DATA 0x62
>> #define EC_SC 0x66
>
>> @@ -28,6 +28,7 @@
>> select SOUTHBRIDGE_TI_PCIXX12
>> select SUPERIO_SMSC_FDC37N972
>> select SUPERIO_SMSC_SIO10N268
>> + select EC_ACPI
>> select BOARD_HAS_FADT
>> select HAVE_ACPI_TABLES
>> select HAVE_PIRQ_TABLE
>
> Maybe we want to add support for explicit EC types and reference those
> here? And then have the acpi code shared between all those ECs.
> The Roda RK886EX has it's EC code spread out into src/superio/renesas,
> too.
I will submit patches for that later. For now i want to remove only the
ec code in the mainboard dir for the upcoming Thinkpad patch.
>> Index: src/mainboard/getac/p470/mainboard_smi.c
>> ===================================================================
>> --- src/mainboard/getac/p470/mainboard_smi.c (revision 6260)
>> +++ src/mainboard/getac/p470/mainboard_smi.c (working copy)
>> @@ -26,7 +26,8 @@
>> #include "southbridge/intel/i82801gx/i82801gx.h"
>> #include "southbridge/intel/i82801gx/nvs.h"
>> #include "northbridge/intel/i945/udelay.c"
>> -#include "ec.c"
>> +#include <ec/acpi/ec.h>
>
> ec/acpi.h?
I want to keep the current layout. When adding other ECs (like the PMH7
in the thinkpad, which can be considered to be an EC), the path will
be something like ec/lenovo/pmh7. I don't want to have header files
in the toplevel ec directory.
>> +#include "ec_oem.c"
>>
>> #define MAX_LCD_BRIGHTNESS 0xd8
>>
>> Index: src/mainboard/getac/p470/Makefile.inc
>> ===================================================================
>> --- src/mainboard/getac/p470/Makefile.inc (revision 6260)
>> +++ src/mainboard/getac/p470/Makefile.inc (working copy)
>> @@ -21,3 +21,4 @@
>> ramstage-$(CONFIG_HAVE_ACPI_SLIC) += acpi_slic.c
>>
>> smm-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.c
>> +smm-$(CONFIG_HAVE_SMI_HANDLER) += ../../../ec/acpi/ec.c
>
> shouldn't the EC makefile in src/ec/acpi say
>
> smm-$(CONFIG_HAVE_SMI_HANDLER) += ec.c instead?
Done. You're right, looks better this way.
>> Index: src/mainboard/getac/p470/devicetree.cb
>> ===================================================================
>> --- src/mainboard/getac/p470/devicetree.cb (revision 6260)
>> +++ src/mainboard/getac/p470/devicetree.cb (working copy)
>> @@ -133,6 +133,12 @@
>> end
>> device pnp 4e.b off # HWM
>> end
>> + chip ec/acpi
>> + device pnp ff.1 on
>> + io 0x60 = 0x62
>> + io 0x62 = 0x66
>> + end
>> + end
>
> what's the device pnp and io 0x60/io 0x62 used for? this does not look
> too good. I would wipe it.
The reason to have the dummy pnp device is that coreboot has no
device type for static I/O addresses in the devicetree.cb. At least i
didn't found any sign of its existence. So i've added that dummy device
to reserve the 0x62/0x66 ACPI register pair for the ACPI EC.
As you know the code much better than i do, i removed it in the attached
patch anyways.
Signed-off-by: Sven Schnelle <svens at stackframe.org>
Index: src/Kconfig
===================================================================
--- src/Kconfig (revision 6275)
+++ src/Kconfig (working copy)
@@ -124,6 +124,8 @@
source src/superio/Kconfig
comment "Devices"
source src/devices/Kconfig
+comment "Embedded Controllers"
+source src/ec/Kconfig
endmenu
Index: src/ec/Kconfig
===================================================================
--- src/ec/Kconfig (revision 0)
+++ src/ec/Kconfig (revision 0)
@@ -0,0 +1 @@
+source src/ec/acpi/Kconfig
Index: src/ec/Makefile.inc
===================================================================
--- src/ec/Makefile.inc (revision 0)
+++ src/ec/Makefile.inc (revision 0)
@@ -0,0 +1 @@
+subdirs-y += acpi
Index: src/ec/acpi/Kconfig
===================================================================
--- src/ec/acpi/Kconfig (revision 0)
+++ src/ec/acpi/Kconfig (revision 0)
@@ -0,0 +1,5 @@
+config EC_ACPI
+ bool
+ help
+ ACPI Embedded Controller interface. Mostly found
+ in latops.
Index: src/ec/acpi/Makefile.inc
===================================================================
--- src/ec/acpi/Makefile.inc (revision 0)
+++ src/ec/acpi/Makefile.inc (revision 0)
@@ -0,0 +1,2 @@
+ramstage-y += ec.c
+smm-$(CONFIG_HAVE_SMI_HANDLER) += ec.c
Index: src/ec/acpi/ec.c
===================================================================
--- src/ec/acpi/ec.c (revision 0)
+++ src/ec/acpi/ec.c (working copy)
@@ -20,6 +20,7 @@
*/
#include <console/console.h>
+#include <device/device.h>
#include <arch/io.h>
#include <delay.h>
#include "ec.h"
@@ -112,3 +113,6 @@
return send_ec_data(data);
}
+struct chip_operations ec_acpi_ops = {
+ CHIP_NAME("ACPI Embedded Controller")
+};
Index: src/ec/acpi/ec.h
===================================================================
--- src/ec/acpi/ec.h (revision 0)
+++ src/ec/acpi/ec.h (working copy)
@@ -17,8 +17,8 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#ifndef _MAINBOARD_EC_H
-#define _MAINBOARD_EC_H
+#ifndef _EC_ACPI_H
+#define _EC_ACPI_H
#define EC_DATA 0x62
#define EC_SC 0x66
Index: src/mainboard/getac/p470/Kconfig
===================================================================
--- src/mainboard/getac/p470/Kconfig (revision 6275)
+++ src/mainboard/getac/p470/Kconfig (working copy)
@@ -28,6 +28,7 @@
select SOUTHBRIDGE_TI_PCIXX12
select SUPERIO_SMSC_FDC37N972
select SUPERIO_SMSC_SIO10N268
+ select EC_ACPI
select BOARD_HAS_FADT
select HAVE_ACPI_TABLES
select HAVE_PIRQ_TABLE
Index: src/mainboard/getac/p470/mainboard_smi.c
===================================================================
--- src/mainboard/getac/p470/mainboard_smi.c (revision 6275)
+++ src/mainboard/getac/p470/mainboard_smi.c (working copy)
@@ -26,7 +26,8 @@
#include "southbridge/intel/i82801gx/i82801gx.h"
#include "southbridge/intel/i82801gx/nvs.h"
#include "northbridge/intel/i945/udelay.c"
-#include "ec.c"
+#include <ec/acpi/ec.h>
+#include "ec_oem.c"
#define MAX_LCD_BRIGHTNESS 0xd8
Index: src/mainboard/getac/p470/devicetree.cb
===================================================================
--- src/mainboard/getac/p470/devicetree.cb (revision 6275)
+++ src/mainboard/getac/p470/devicetree.cb (working copy)
@@ -133,6 +133,8 @@
end
device pnp 4e.b off # HWM
end
+ chip ec/acpi
+ end
end
end
Index: src/mainboard/getac/p470/ec.c
===================================================================
--- src/mainboard/getac/p470/ec.c (revision 6275)
+++ src/mainboard/getac/p470/ec.c (working copy)
@@ -1,235 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#include <console/console.h>
-#include <arch/io.h>
-#include <delay.h>
-#include "ec.h"
-
-int send_ec_command(u8 command)
-{
- int timeout;
-
- timeout = 0x7ff;
- while ((inb(EC_SC) & EC_IBF) && --timeout) {
- udelay(10);
- if ((timeout & 0xff) == 0)
- printk(BIOS_SPEW, ".");
- }
- if (!timeout) {
- printk(BIOS_DEBUG, "Timeout while sending command 0x%02x to EC!\n",
- command);
- // return -1;
- }
-
- outb(command, EC_SC);
- return 0;
-}
-
-int send_ec_data(u8 data)
-{
- int timeout;
-
- timeout = 0x7ff;
- while ((inb(EC_SC) & EC_IBF) && --timeout) { // wait for IBF = 0
- udelay(10);
- if ((timeout & 0xff) == 0)
- printk(BIOS_SPEW, ".");
- }
- if (!timeout) {
- printk(BIOS_DEBUG, "Timeout while sending data 0x%02x to EC!\n",
- data);
- // return -1;
- }
-
- outb(data, EC_DATA);
-
- return 0;
-}
-
-int send_ec_data_nowait(u8 data)
-{
- outb(data, EC_DATA);
-
- return 0;
-}
-
-u8 recv_ec_data(void)
-{
- int timeout;
- u8 data;
-
- timeout = 0x7fff;
- while (--timeout) { // Wait for OBF = 1
- if (inb(EC_SC) & EC_OBF) {
- break;
- }
- udelay(10);
- if ((timeout & 0xff) == 0)
- printk(BIOS_SPEW, ".");
- }
- if (!timeout) {
- printk(BIOS_DEBUG, "\nTimeout while receiving data from EC!\n");
- // return -1;
- }
-
- data = inb(EC_DATA);
- printk(BIOS_SPEW, "recv_ec_data: 0x%02x\n", data);
-
- return data;
-}
-
-u8 ec_read(u8 addr)
-{
- send_ec_command(0x80);
- send_ec_data(addr);
-
- return recv_ec_data();
-}
-
-int ec_write(u8 addr, u8 data)
-{
- send_ec_command(0x81);
- send_ec_data(addr);
- return send_ec_data(data);
-}
-
-int ec_dump_status(void)
-{
- u8 ec_sc = inb(EC_SC);
- printk(BIOS_DEBUG, "Embedded Controller Status: ");
- if (ec_sc & (1 << 6)) printk(BIOS_DEBUG, "SMI_EVT ");
- if (ec_sc & (1 << 5)) printk(BIOS_DEBUG, "SCI_EVT ");
- if (ec_sc & (1 << 4)) printk(BIOS_DEBUG, "BURST ");
- if (ec_sc & (1 << 3)) printk(BIOS_DEBUG, "CMD ");
- if (ec_sc & (1 << 1)) printk(BIOS_DEBUG, "IBF ");
- if (ec_sc & (1 << 0)) printk(BIOS_DEBUG, "OBF ");
- printk(BIOS_DEBUG, "\n");
-
- return ec_sc;
-}
-
-
-/* ********************************** */
-
-int send_ec_oem_command(u8 command)
-{
- int timeout;
-
- timeout = 0x7ff;
- while ((inb(EC_OEM_SC) & EC_IBF) && --timeout) {
- udelay(10);
- if ((timeout & 0xff) == 0)
- printk(BIOS_SPEW, ".");
- }
- if (!timeout) {
- printk(BIOS_DEBUG, "Timeout while sending OEM command 0x%02x to EC!\n",
- command);
- // return -1;
- }
-
- outb(command, EC_OEM_SC);
- return 0;
-}
-
-int send_ec_oem_data(u8 data)
-{
- int timeout;
-
- timeout = 0x7ff;
- while ((inb(EC_OEM_SC) & EC_IBF) && --timeout) { // wait for IBF = 0
- udelay(10);
- if ((timeout & 0xff) == 0)
- printk(BIOS_SPEW, ".");
- }
- if (!timeout) {
- printk(BIOS_DEBUG, "Timeout while sending OEM data 0x%02x to EC!\n",
- data);
- // return -1;
- }
-
- outb(data, EC_OEM_DATA);
-
- return 0;
-}
-
-int send_ec_oem_data_nowait(u8 data)
-{
- outb(data, EC_OEM_DATA);
-
- return 0;
-}
-
-u8 recv_ec_oem_data(void)
-{
- int timeout;
- u8 data;
-
- timeout = 0x7fff;
- while (--timeout) { // Wait for OBF = 1
- if (inb(EC_OEM_SC) & EC_OBF) {
- break;
- }
- udelay(10);
- if ((timeout & 0xff) == 0)
- printk(BIOS_SPEW, ".");
- }
- if (!timeout) {
- printk(BIOS_DEBUG, "\nTimeout while receiving OEM data from EC!\n");
- // return -1;
- }
-
- data = inb(EC_OEM_DATA);
- // printk(BIOS_SPEW, "recv_ec_oem_data: 0x%02x\n", data);
-
- return data;
-}
-
-u8 ec_oem_read(u8 addr)
-{
- send_ec_oem_command(0x80);
- send_ec_oem_data(addr);
-
- return recv_ec_oem_data();
-}
-
-int ec_oem_write(u8 addr, u8 data)
-{
- send_ec_oem_command(0x81);
- send_ec_oem_data(addr);
- return send_ec_oem_data(data);
-}
-
-int ec_oem_dump_status(void)
-{
- u8 ec_sc = inb(EC_OEM_SC);
- printk(BIOS_DEBUG, "Embedded Controller Status: ");
- if (ec_sc & (1 << 6)) printk(BIOS_DEBUG, "SMI_EVT ");
- if (ec_sc & (1 << 5)) printk(BIOS_DEBUG, "SCI_EVT ");
- if (ec_sc & (1 << 4)) printk(BIOS_DEBUG, "BURST ");
- if (ec_sc & (1 << 3)) printk(BIOS_DEBUG, "CMD ");
- if (ec_sc & (1 << 1)) printk(BIOS_DEBUG, "IBF ");
- if (ec_sc & (1 << 0)) printk(BIOS_DEBUG, "OBF ");
- printk(BIOS_DEBUG, "\n");
-
- return ec_sc;
-}
-
Index: src/mainboard/getac/p470/ec_oem.c
===================================================================
--- src/mainboard/getac/p470/ec_oem.c (revision 6275)
+++ src/mainboard/getac/p470/ec_oem.c (working copy)
@@ -22,114 +22,9 @@
#include <console/console.h>
#include <arch/io.h>
#include <delay.h>
-#include "ec.h"
+#include <ec/acpi/ec.h>
+#include "ec_oem.h"
-int send_ec_command(u8 command)
-{
- int timeout;
-
- timeout = 0x7ff;
- while ((inb(EC_SC) & EC_IBF) && --timeout) {
- udelay(10);
- if ((timeout & 0xff) == 0)
- printk(BIOS_SPEW, ".");
- }
- if (!timeout) {
- printk(BIOS_DEBUG, "Timeout while sending command 0x%02x to EC!\n",
- command);
- // return -1;
- }
-
- outb(command, EC_SC);
- return 0;
-}
-
-int send_ec_data(u8 data)
-{
- int timeout;
-
- timeout = 0x7ff;
- while ((inb(EC_SC) & EC_IBF) && --timeout) { // wait for IBF = 0
- udelay(10);
- if ((timeout & 0xff) == 0)
- printk(BIOS_SPEW, ".");
- }
- if (!timeout) {
- printk(BIOS_DEBUG, "Timeout while sending data 0x%02x to EC!\n",
- data);
- // return -1;
- }
-
- outb(data, EC_DATA);
-
- return 0;
-}
-
-int send_ec_data_nowait(u8 data)
-{
- outb(data, EC_DATA);
-
- return 0;
-}
-
-u8 recv_ec_data(void)
-{
- int timeout;
- u8 data;
-
- timeout = 0x7fff;
- while (--timeout) { // Wait for OBF = 1
- if (inb(EC_SC) & EC_OBF) {
- break;
- }
- udelay(10);
- if ((timeout & 0xff) == 0)
- printk(BIOS_SPEW, ".");
- }
- if (!timeout) {
- printk(BIOS_DEBUG, "\nTimeout while receiving data from EC!\n");
- // return -1;
- }
-
- data = inb(EC_DATA);
- printk(BIOS_SPEW, "recv_ec_data: 0x%02x\n", data);
-
- return data;
-}
-
-u8 ec_read(u8 addr)
-{
- send_ec_command(0x80);
- send_ec_data(addr);
-
- return recv_ec_data();
-}
-
-int ec_write(u8 addr, u8 data)
-{
- send_ec_command(0x81);
- send_ec_data(addr);
- return send_ec_data(data);
-}
-
-int ec_dump_status(void)
-{
- u8 ec_sc = inb(EC_SC);
- printk(BIOS_DEBUG, "Embedded Controller Status: ");
- if (ec_sc & (1 << 6)) printk(BIOS_DEBUG, "SMI_EVT ");
- if (ec_sc & (1 << 5)) printk(BIOS_DEBUG, "SCI_EVT ");
- if (ec_sc & (1 << 4)) printk(BIOS_DEBUG, "BURST ");
- if (ec_sc & (1 << 3)) printk(BIOS_DEBUG, "CMD ");
- if (ec_sc & (1 << 1)) printk(BIOS_DEBUG, "IBF ");
- if (ec_sc & (1 << 0)) printk(BIOS_DEBUG, "OBF ");
- printk(BIOS_DEBUG, "\n");
-
- return ec_sc;
-}
-
-
-/* ********************************** */
-
int send_ec_oem_command(u8 command)
{
int timeout;
Index: src/mainboard/getac/p470/mainboard.c
===================================================================
--- src/mainboard/getac/p470/mainboard.c (revision 6275)
+++ src/mainboard/getac/p470/mainboard.c (working copy)
@@ -28,7 +28,7 @@
#include "chip.h"
#include "hda_verb.h"
-#include "ec.c"
+#include "ec_oem.c"
#define MAX_LCD_BRIGHTNESS 0xd8
Index: src/mainboard/getac/p470/ec.h
===================================================================
--- src/mainboard/getac/p470/ec.h (revision 6275)
+++ src/mainboard/getac/p470/ec.h (working copy)
@@ -1,64 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#ifndef _MAINBOARD_EC_H
-#define _MAINBOARD_EC_H
-
-#define EC_DATA 0x62
-#define EC_SC 0x66
-
-
-#define EC_OEM_DATA 0x68
-#define EC_OEM_SC 0x6c
-
-/* EC_SC input */
-#define EC_SMI_EVT (1 << 6) // 1: SMI event pending
-#define EC_SCI_EVT (1 << 5) // 1: SCI event pending
-#define EC_BURST (1 << 4) // controller is in burst mode
-#define EC_CMD (1 << 3) // 1: byte in data register is command
- // 0: byte in data register is data
-#define EC_IBF (1 << 1) // 1: input buffer full (data ready for ec)
-#define EC_OBF (1 << 0) // 1: output buffer full (data ready for host)
-/* EC_SC output */
-#define RD_EC 0x80 // Read Embedded Controller
-#define WR_EC 0x81 // Write Embedded Controller
-#define BE_EC 0x82 // Burst Enable Embedded Controller
-#define BD_EC 0x83 // Burst Disable Embedded Controller
-#define QR_EC 0x84 // Query Embedded Controller
-
-int send_ec_command(u8 command);
-int send_ec_data(u8 data);
-int send_ec_data_nowait(u8 data);
-u8 recv_ec_data(void);
-u8 ec_read(u8 addr);
-int ec_write(u8 addr, u8 data);
-
-int send_ec_oem_command(u8 command);
-int send_ec_oem_data(u8 data);
-int send_ec_oem_data_nowait(u8 data);
-u8 recv_ec_oem_data(void);
-u8 ec_oem_read(u8 addr);
-int ec_oem_write(u8 addr, u8 data);
-
-int ec_dump_status(void);
-int ec_oem_dump_status(void);
-#endif
-
Index: src/mainboard/getac/p470/ec_oem.h
===================================================================
--- src/mainboard/getac/p470/ec_oem.h (revision 6275)
+++ src/mainboard/getac/p470/ec_oem.h (working copy)
@@ -19,13 +19,9 @@
* MA 02110-1301 USA
*/
-#ifndef _MAINBOARD_EC_H
-#define _MAINBOARD_EC_H
+#ifndef _MAINBOARD_EC_OEM_H
+#define _MAINBOARD_EC_OEM_H
-#define EC_DATA 0x62
-#define EC_SC 0x66
-
-
#define EC_OEM_DATA 0x68
#define EC_OEM_SC 0x6c
@@ -44,13 +40,6 @@
#define BD_EC 0x83 // Burst Disable Embedded Controller
#define QR_EC 0x84 // Query Embedded Controller
-int send_ec_command(u8 command);
-int send_ec_data(u8 data);
-int send_ec_data_nowait(u8 data);
-u8 recv_ec_data(void);
-u8 ec_read(u8 addr);
-int ec_write(u8 addr, u8 data);
-
int send_ec_oem_command(u8 command);
int send_ec_oem_data(u8 data);
int send_ec_oem_data_nowait(u8 data);
Index: src/mainboard/roda/rk886ex/Makefile.inc
===================================================================
--- src/mainboard/roda/rk886ex/Makefile.inc (revision 6275)
+++ src/mainboard/roda/rk886ex/Makefile.inc (working copy)
@@ -18,7 +18,6 @@
##
ramstage-y += m3885.c
-ramstage-y += ec.c
driver-y += rtl8168.c
smm-$(CONFIG_HAVE_SMI_HANDLER) += mainboard_smi.c
Index: src/mainboard/roda/rk886ex/mainboard_smi.c
===================================================================
--- src/mainboard/roda/rk886ex/mainboard_smi.c (revision 6275)
+++ src/mainboard/roda/rk886ex/mainboard_smi.c (working copy)
@@ -24,6 +24,7 @@
#include <console/console.h>
#include <cpu/x86/smm.h>
#include "southbridge/intel/i82801gx/nvs.h"
+#include "northbridge/intel/i945/udelay.c"
/* The southbridge SMI handler checks whether gnvs has a
* valid pointer before calling the trap handler
Index: src/mainboard/roda/rk886ex/devicetree.cb
===================================================================
--- src/mainboard/roda/rk886ex/devicetree.cb (revision 6275)
+++ src/mainboard/roda/rk886ex/devicetree.cb (working copy)
@@ -104,6 +104,8 @@
device pnp ff.1 on # dummy address
end
end
+ chip ec/acpi
+ end
end
#device pci 1f.1 off end # IDE
Index: src/mainboard/roda/rk886ex/m3885.c
===================================================================
--- src/mainboard/roda/rk886ex/m3885.c (revision 6275)
+++ src/mainboard/roda/rk886ex/m3885.c (working copy)
@@ -25,7 +25,7 @@
#include <arch/io.h>
#include <delay.h>
-#include "ec.h"
+#include <ec/acpi/ec.h>
#include "m3885.h"
#define TH0LOW 80
Index: src/mainboard/roda/rk886ex/ec.c
===================================================================
--- src/mainboard/roda/rk886ex/ec.c (revision 6275)
+++ src/mainboard/roda/rk886ex/ec.c (working copy)
@@ -1,114 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#include <console/console.h>
-#include <arch/io.h>
-#include <delay.h>
-#include "ec.h"
-
-int send_ec_command(u8 command)
-{
- int timeout;
-
- timeout = 0x7ff;
- while ((inb(EC_SC) & EC_IBF) && --timeout) {
- udelay(10);
- if ((timeout & 0xff) == 0)
- printk(BIOS_SPEW, ".");
- }
- if (!timeout) {
- printk(BIOS_DEBUG, "Timeout while sending command 0x%02x to EC!\n",
- command);
- // return -1;
- }
-
- outb(command, EC_SC);
- return 0;
-}
-
-int send_ec_data(u8 data)
-{
- int timeout;
-
- timeout = 0x7ff;
- while ((inb(EC_SC) & EC_IBF) && --timeout) { // wait for IBF = 0
- udelay(10);
- if ((timeout & 0xff) == 0)
- printk(BIOS_SPEW, ".");
- }
- if (!timeout) {
- printk(BIOS_DEBUG, "Timeout while sending data 0x%02x to EC!\n",
- data);
- // return -1;
- }
-
- outb(data, EC_DATA);
-
- return 0;
-}
-
-int send_ec_data_nowait(u8 data)
-{
- outb(data, EC_DATA);
-
- return 0;
-}
-
-u8 recv_ec_data(void)
-{
- int timeout;
- u8 data;
-
- timeout = 0x7fff;
- while (--timeout) { // Wait for OBF = 1
- if (inb(EC_SC) & EC_OBF) {
- break;
- }
- udelay(10);
- if ((timeout & 0xff) == 0)
- printk(BIOS_SPEW, ".");
- }
- if (!timeout) {
- printk(BIOS_DEBUG, "\nTimeout while receiving data from EC!\n");
- // return -1;
- }
-
- data = inb(EC_DATA);
- printk(BIOS_DEBUG, "recv_ec_data: 0x%02x\n", data);
-
- return data;
-}
-
-u8 ec_read(u8 addr)
-{
- send_ec_command(0x80);
- send_ec_data(addr);
-
- return recv_ec_data();
-}
-
-int ec_write(u8 addr, u8 data)
-{
- send_ec_command(0x81);
- send_ec_data(addr);
- return send_ec_data(data);
-}
-
Index: src/mainboard/roda/rk886ex/mainboard.c
===================================================================
--- src/mainboard/roda/rk886ex/mainboard.c (revision 6275)
+++ src/mainboard/roda/rk886ex/mainboard.c (working copy)
@@ -30,7 +30,7 @@
#include <arch/coreboot_tables.h>
#include "chip.h"
-#include "ec.h"
+#include <ec/acpi/ec.h>
#include "m3885.h"
#define DUMP_RUNTIME_REGISTERS 0
Index: src/mainboard/roda/rk886ex/ec.h
===================================================================
--- src/mainboard/roda/rk886ex/ec.h (revision 6275)
+++ src/mainboard/roda/rk886ex/ec.h (working copy)
@@ -1,49 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef _MAINBOARD_EC_H
-#define _MAINBOARD_EC_H
-
-#define EC_DATA 0x62
-#define EC_SC 0x66
-
-/* EC_SC input */
-#define EC_SMI_EVT (1 << 6) // 1: SMI event pending
-#define EC_SCI_EVT (1 << 5) // 1: SCI event pending
-#define EC_BURST (1 << 4) // controller is in burst mode
-#define EC_CMD (1 << 3) // 1: byte in data register is command
- // 0: byte in data register is data
-#define EC_IBF (1 << 1) // 1: input buffer full (data ready for ec)
-#define EC_OBF (1 << 0) // 1: output buffer full (data ready for host)
-/* EC_SC output */
-#define RD_EC 0x80 // Read Embedded Controller
-#define WR_EC 0x81 // Write Embedded Controller
-#define BE_EC 0x82 // Burst Enable Embedded Controller
-#define BD_EC 0x83 // Burst Disable Embedded Controller
-#define QR_EC 0x84 // Query Embedded Controller
-
-int send_ec_command(u8 command);
-int send_ec_data(u8 data);
-int send_ec_data_nowait(u8 data);
-u8 recv_ec_data(void);
-u8 ec_read(u8 addr);
-int ec_write(u8 addr, u8 data);
-
-#endif
-
Index: Makefile
===================================================================
--- Makefile (revision 6275)
+++ Makefile (working copy)
@@ -123,7 +123,7 @@
PLATFORM-y += src/arch/$(ARCHDIR-y) src/cpu src/mainboard/$(MAINBOARDDIR)
TARGETS-y :=
-BUILD-y := src/lib src/boot src/console src/devices src/southbridge src/northbridge src/superio src/drivers
+BUILD-y := src/lib src/boot src/console src/devices src/ec src/southbridge src/northbridge src/superio src/drivers
BUILD-y += util/cbfstool util/sconfig
BUILD-$(CONFIG_ARCH_X86) += src/pc80
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 197 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20110119/01b2d195/attachment.sig>
More information about the coreboot
mailing list