[coreboot] AMD Phenom II 1055T was : Hackaton in Prague 2011

Florentin Demetrescu echelon at free.fr
Wed Jul 13 11:57:07 CEST 2011


Xavi, Kerry and Marc,
Tahnk you very much for these advices!
This will facilitate greatly my work..
Concerning my coreboot tests on MA785GMT-UDH2 with Phenom II 1055T, I hope to be
able to give you a feedback next week.
Thank you again!
 Florentin Demetrescu


Quoting "She, Kerry" <Kerry.She at amd.com>:

>
>
> > -----Original Message-----
> > From: coreboot-bounces at coreboot.org
> [mailto:coreboot-bounces at coreboot.org]
> > On Behalf Of xdrudis
> > Sent: Wednesday, July 13, 2011 12:18 AM
> > To: Florentin Demetrescu
> > Cc: coreboot at coreboot.org
> > Subject: [coreboot] AMD Phenom II 1055T was : Hackaton in Prague 2011
> >
> > On Sat, Jul 09, 2011 at 05:04:43PM +0200, Florentin Demetrescu wrote:
> > >
> > >  - my objective was to install coreboot on my new board
> MA785GMT-UDH2. I
> > had
> > > bring with me a Phenom II 1055T CPU with 6 cores. Unfortunately I
> met big
> > > problems because:
> > [...]
> > > coreboot and give it a run, but I will do that ASAP! Also I will
> > investigate the
> > > problem of the 6 core Phenom II on this board..
> > >
> >
> > Isn't it a fam 10 revision E CPU ?
> >
> > Coreboot did not have any code specific for Fam 10 rev E last time I
> > checked (mid feb 2011) (no errata workarounds, no specific
> > initialization, just a small untested part in fidvid.c). There wasn't
> > even a constant defined for rev E.
> >
> > Back in August 2010 I asked how to extend the revision bitfield that's
> > used as a trigger for rule based initializations and workarounds, and
> > in a small thread it was suggested to get rid of it and use a struct,
> > but I never did.
> > http://www.coreboot.org/pipermail/coreboot/2010-August/059701.html
>
> AMD Family10 RevE support code was just added into Coreboot a few weeks
> ago,
> Please check http://review.coreboot.org/40 in detail,
> The RevD support code are ready, and will release soon.
> I think it's not hard to implement RevE, by using the RevD as an
> reference.
> thanks
> --
> Kerry
> >
> > --
> > coreboot mailing list: coreboot at coreboot.org
> > http://www.coreboot.org/mailman/listinfo/coreboot
>
>
>










More information about the coreboot mailing list