[coreboot] How to make "System Restart after Power Fail" working onSB800?

[mopz0506 mopz0506]

I'll give it a try.

Thanks,
mopz0506

On 10/16/11, Scott Duplichan <scott at notabs.org> wrote:
> mopz0506 wrote:
>
> ]Hi,
> ]
> ]My mainboard is ASRock E350M1, it's sourthbridge is AMD SB800.
> ]
> ]I want the machine to restart once I connect the power cable to
> ]it, without press the POWER button on the front panel.
> ]...
>
> I worked on a similar problem a wile back, though I don't
> remember if it was with ASRock E350M1 or something else.
> Anyway, I finally came to the conclusion that my board used
> the SIO for this function, and not the SB800. I think I used the
> OEM BIOS and compared SIO registers with both settings. It might
> be logical device A, CR E4h bits 5 and 6, though I don't have
> the exact datasheet.
>
> Thanks,
> Scott
>
>