[coreboot] Enable paging in SMM handler

Fengwei Zhang namedylan at gmail.com
Tue Sep 27 05:02:50 CEST 2011

Previous message: [coreboot] Issues with coreboot on MSI 6119
Next message: [coreboot] New patch to review for coreboot: 603f80e The hp/dl145_g1 motherboard did not work since commit 1f7d3c5672ec90f8d71907b1a07c8a87fa461047 (svn 6124). That commit added TINY_BOOTBLOCK for amd8111 southbridge. The result was that the boot process stopped very early (no console output whatsoever). The same symptom was reported on other AMDK8 based boards with amd8111 southbridge chips. This commit seems to fix the bug. It adds a bootblock.c under src/northbridge/amd/amdk8 that calls enumerate_ht_chains. Probably the problem was that enum_ht_chains needs to be called before the southbridge bootblock.c function, not after.
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi all,

Is it possible for me to enable paging in SMM hander? 
If yes, do I just need to set PG bit in cr0 after switch to protected mode?

I am using board ASUS M2V-MX_SE.

Thanks for any response. 

Regards,
Fengwei

More information about the coreboot mailing list