[coreboot] Patch set updated for coreboot: 7f83ace Intel e7505: cleanups
Kyösti Mälkki (kyosti.malkki@gmail.com)
gerrit at coreboot.org
Tue Apr 10 19:04:07 CEST 2012
Kyösti Mälkki (kyosti.malkki at gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/883
-gerrit
commit 7f83ace920173381d4a6316a375b685735d424fa
Author: Kyösti Mälkki <kyosti.malkki at gmail.com>
Date: Tue Apr 10 19:55:19 2012 +0300
Intel e7505: cleanups
Fix delay loop comments. Time waited and the comments did not match
in the origin (e7501), so delays currently "just work".
Move reset detection to main raminit and don't use generic
sdram_initialize for now, as there are local debug
functions I need to use. Fix AOpen respectively.
Disable ecc scrub, until I have it fixed for cache-as-ram use.
Change-Id: I0529297f43c565d30b5fb7d1836700278ac029c4
Signed-off-by: Kyösti Mälkki <kyosti.malkki at gmail.com>
---
src/mainboard/aopen/dxplplusu/romstage.c | 2 -
src/northbridge/intel/e7505/raminit.c | 89 +++++++++++++++--------------
src/northbridge/intel/e7505/reset_test.c | 18 ------
3 files changed, 46 insertions(+), 63 deletions(-)
diff --git a/src/mainboard/aopen/dxplplusu/romstage.c b/src/mainboard/aopen/dxplplusu/romstage.c
index 92ce896..573e0f1 100644
--- a/src/mainboard/aopen/dxplplusu/romstage.c
+++ b/src/mainboard/aopen/dxplplusu/romstage.c
@@ -62,8 +62,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#endif
#include "northbridge/intel/e7505/raminit.c"
-#include "northbridge/intel/e7505/reset_test.c"
-#include "lib/generic_sdram.c"
// This function MUST appear last (ROMCC limitation)
BOARD_MAIN(unsigned long bist)
diff --git a/src/northbridge/intel/e7505/raminit.c b/src/northbridge/intel/e7505/raminit.c
index 21ffba2..29eb42b 100644
--- a/src/northbridge/intel/e7505/raminit.c
+++ b/src/northbridge/intel/e7505/raminit.c
@@ -464,27 +464,25 @@ static const uint32_t pull_updown_offset_table[] = {
Delay functions:
-----------------------------------------------------------------------------*/
+/* Estimate that SLOW_DOWN_IO takes about 1 us */
#define SLOW_DOWN_IO inb(0x80)
-//#define SLOW_DOWN_IO udelay(40);
-
- /* Estimate that SLOW_DOWN_IO takes about 50&76us */
- /* delay for 200us */
-
-#if 1
-static void do_delay(void)
+static inline void local_udelay(int i)
{
- int i;
- for (i = 0; i < 16; i++) {
+ while (i--) {
SLOW_DOWN_IO;
}
}
-#define DO_DELAY do_delay()
-#else
-#define DO_DELAY \
- udelay(200)
-#endif
+static inline void local_mdelay(int i)
+{
+ i *= 1000;
+ while (i--) {
+ SLOW_DOWN_IO;
+ }
+}
+/* delay for 200us */
+#define DO_DELAY local_udelay(200)
#define EXTRA_DELAY DO_DELAY
/*-----------------------------------------------------------------------------
@@ -913,8 +911,10 @@ static void do_ram_command(uint8_t command, uint16_t jedec_mode_bits)
// RAM_COMMAND_NORMAL is an exception.
// It affects only the memory controller and does not need to be "sent" to the DIMMs.
- if (command == RAM_COMMAND_NORMAL)
+ if (command == RAM_COMMAND_NORMAL) {
+ EXTRA_DELAY;
return;
+ }
// NOTE: for mode select commands, some of the location address bits are part of the command
// Map JEDEC mode bits to E7505
@@ -949,7 +949,7 @@ static void do_ram_command(uint8_t command, uint16_t jedec_mode_bits)
dimm_start_64M_multiple = dimm_end_64M_multiple;
}
}
-
+ EXTRA_DELAY;
}
/**
@@ -1169,6 +1169,7 @@ static void configure_e7501_ram_addresses(const struct mem_controller
* If we're configured to use ECC, initialize the SDRAM and clear the E7501's
* ECC error flags.
*/
+#ifdef __ROMCC__
static void initialize_ecc(void)
{
uint32_t dram_controller_mode;
@@ -1202,6 +1203,7 @@ static void initialize_ecc(void)
}
}
+#endif
/**
* Program the DRAM Timing register (DRT) of the E7501 (except for CAS#
@@ -1898,12 +1900,10 @@ Public interface:
* refresh and initialize ECC and memory to zero. Upon exit, SDRAM is up
* and running.
*
- * @param controllers Not used.
* @param ctrl PCI addresses of memory controller functions, and SMBus
* addresses of DIMM slots on the mainboard.
*/
-static void sdram_enable(int controllers,
- const struct mem_controller *ctrl)
+static void sdram_enable(const struct mem_controller *ctrl)
{
uint8_t dimm_mask = pci_read_config16(MCHDEV, SKPD);
uint32_t dram_controller_mode;
@@ -1921,12 +1921,10 @@ static void sdram_enable(int controllers,
/* 3. Apply NOP */
RAM_DEBUG_MESSAGE("Ram Enable 3\n");
do_ram_command(RAM_COMMAND_NOP, 0);
- EXTRA_DELAY;
/* 4 Precharge all */
RAM_DEBUG_MESSAGE("Ram Enable 4\n");
do_ram_command(RAM_COMMAND_PRECHARGE, 0);
- EXTRA_DELAY;
/* wait until the all banks idle state... */
/* 5. Issue EMRS to enable DLL */
@@ -1934,7 +1932,6 @@ static void sdram_enable(int controllers,
do_ram_command(RAM_COMMAND_EMRS,
SDRAM_EXTMODE_DLL_ENABLE |
SDRAM_EXTMODE_DRIVE_NORMAL);
- EXTRA_DELAY;
/* 6. Reset DLL */
RAM_DEBUG_MESSAGE("Ram Enable 6\n");
@@ -1949,33 +1946,17 @@ static void sdram_enable(int controllers,
/* 7 Precharge all */
RAM_DEBUG_MESSAGE("Ram Enable 7\n");
do_ram_command(RAM_COMMAND_PRECHARGE, 0);
- EXTRA_DELAY;
/* 8 Now we need 2 AUTO REFRESH / CBR cycles to be performed */
- RAM_DEBUG_MESSAGE("Ram Enable 8\n");
- do_ram_command(RAM_COMMAND_CBR, 0);
- EXTRA_DELAY;
- do_ram_command(RAM_COMMAND_CBR, 0);
- EXTRA_DELAY;
-
/* And for good luck 6 more CBRs */
- do_ram_command(RAM_COMMAND_CBR, 0);
- EXTRA_DELAY;
- do_ram_command(RAM_COMMAND_CBR, 0);
- EXTRA_DELAY;
- do_ram_command(RAM_COMMAND_CBR, 0);
- EXTRA_DELAY;
- do_ram_command(RAM_COMMAND_CBR, 0);
- EXTRA_DELAY;
- do_ram_command(RAM_COMMAND_CBR, 0);
- EXTRA_DELAY;
- do_ram_command(RAM_COMMAND_CBR, 0);
- EXTRA_DELAY;
+ RAM_DEBUG_MESSAGE("Ram Enable 8\n");
+ int i;
+ for(i=0; i<8; i++)
+ do_ram_command(RAM_COMMAND_CBR, 0);
/* 9 mode register set */
RAM_DEBUG_MESSAGE("Ram Enable 9\n");
set_ram_mode(E7501_SDRAM_MODE | SDRAM_MODE_NORMAL);
- EXTRA_DELAY;
/* 10 DDR Receive FIFO RE-Sync */
RAM_DEBUG_MESSAGE("Ram Enable 10\n");
@@ -1985,7 +1966,6 @@ static void sdram_enable(int controllers,
/* 11 normal operation */
RAM_DEBUG_MESSAGE("Ram Enable 11\n");
do_ram_command(RAM_COMMAND_NORMAL, 0);
- EXTRA_DELAY;
// Reconfigure the row boundaries and Top of Low Memory
// to match the true size of the DIMMs
@@ -1996,7 +1976,11 @@ static void sdram_enable(int controllers,
dram_controller_mode |= (1 << 29);
pci_write_config32(MCHDEV, DRC, dram_controller_mode);
EXTRA_DELAY;
+
+#ifdef __ROMCC__
+ /* Problems with cache-as-ram, disable for now */
initialize_ecc();
+#endif
dram_controller_mode = pci_read_config32(MCHDEV, DRC); /* FCS_EN */
dram_controller_mode |= (1 << 17); // NOTE: undocumented reserved bit
@@ -2069,3 +2053,22 @@ static void sdram_set_registers(const struct mem_controller *ctrl)
ram_handle_d060_2();
}
+/**
+ *
+ *
+ */
+void sdram_initialize(int controllers, const struct mem_controller *memctrl)
+{
+ RAM_DEBUG_MESSAGE("Northbridge prior to SDRAM init:\n");
+ DUMPNORTH();
+
+ sdram_set_registers(memctrl);
+ sdram_set_spd_registers(memctrl);
+ sdram_enable(memctrl);
+}
+
+static int bios_reset_detected(void)
+{
+ uint32_t dword = pci_read_config32(MCHDEV, DRC);
+ return !!(dword & DRC_DONE);
+}
diff --git a/src/northbridge/intel/e7505/reset_test.c b/src/northbridge/intel/e7505/reset_test.c
deleted file mode 100644
index 1c0dad5..0000000
--- a/src/northbridge/intel/e7505/reset_test.c
+++ /dev/null
@@ -1,18 +0,0 @@
-/* Convert to C by yhlu */
-#define MCH_DRC 0x7c
-#define DRC_DONE (1 << 29)
- /* If I have already booted once skip a bunch of initialization */
- /* To see if I have already booted I check to see if memory
- * has been enabled.
- */
-static int bios_reset_detected(void) {
- uint32_t dword;
-
- dword = pci_read_config32(PCI_DEV(0, 0, 0), MCH_DRC);
-
- if( (dword & DRC_DONE) != 0 ) {
- return 1;
- }
-
- return 0;
-}
More information about the coreboot
mailing list