[coreboot] Dual SPI Flash adapter attempt 2.0

Oliver Schinagl oliver+list at schinagl.nl
Mon Apr 23 20:23:27 CEST 2012


Hi!

I've worked on a rotated version and planning to do two other 
orientations as well, so early feedback is good, so I don't have to redo 
them again :)

Silk screening isn't 100% right, since I still need to rename them 
eventually somehow (edit .pcb file directly is probably the easiest way?)

On 04/20/12 14:50, Oliver Schinagl wrote:
> Hi list(s),
>
> Here's my second attempt at routing the previously mailed png of my schema.
>
> It was a lot trickier to route then my previous version, but I think it
> worked out!
>
> As mentioned, S1 and S2 need to be shorted if U3 is to be omitted. RN1
> should be 10k or ideally 100k, as Peter mentioned earlier.
>
> Hopefully there's no obvious mistakes and can start working on
> alternative layouts (so it is insert-able in different angles).
>
> DRC Check fails on S1, S2 and U3. It thinks the distance is to shallow.
> That said, DRC check passes when I set the copper width/distance to
> 7mil's instead of the current 8 mils.
>
> I'm planning on having these PCB's manufactured by Seeed studio and
> their minimal width is much smaller.
>
> Minimum trace width: 6mil
> Minimum trace/vias/pads space : 6mil
> Minimum silkscreen width : 4mil
> Minimum silkscreen text size : 32mil
>
> I've used a grid size of 10mil and distances of 8 mils, as I didn't want
> to rely on the minimum of seed. The silkscreen I positioned using a grid
> size of 5 mil's however. Not sure what they mean with a 'minimum
> silkscreen text size' however.
>
> Anyhow, feedback greatly appreciated, so I can start working on
> alternative layouts :)
>
>

-------------- next part --------------
A non-text attachment was scrubbed...
Name: dspif.pcb
Type: application/x-pcb-layout
Size: 54291 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20120423/212f5448/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dspif-2.sch
Type: application/x-kicad-schematic
Size: 6491 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20120423/212f5448/attachment-0001.bin>


More information about the coreboot mailing list