[coreboot] Can we push using http user/password authentication
Zheng.Bao at amd.com
Fri Mar 23 11:27:09 CET 2012
Actually, I have done all the settings, including http password.
After I run git push, it says,
Counting objects: 5, done.
Delta compression using up to 4 threads.
Compressing objects: 100% (3/3), done.
Writing objects: 100% (3/3), 480 bytes, done.
Total 3 (delta 2), reused 0 (delta 0)
That is all. No error report. But I think it need says more:
* [new branch] HEAD -> refs/for/master
Any settings I missed?
> -----Original Message-----
> From: thomasg [mailto:thomas at gstaedtner.net]
> Sent: Friday, March 23, 2012 4:46 PM
> To: Bao, Zheng
> Cc: coreboot at coreboot.org
> Subject: Re: [coreboot] Can we push using http user/password
> On Fri, Mar 23, 2012 at 07:33, Bao, Zheng <Zheng.Bao at amd.com> wrote:
> > Hi,
> > These commits are uploaded at my home by ssh:29418. In our lab, it is
> blocked by firewall. But I cannot go back home every time when I need
> to push.
> > Zheng
> >> -----Original Message-----
> >> From: coreboot-bounces at coreboot.org [mailto:coreboot-
> >> bounces at coreboot.org] On Behalf Of pk
> >> Sent: Friday, March 23, 2012 2:11 PM
> >> To: coreboot at coreboot.org
> >> Subject: Re: [coreboot] Can we push using http user/password
> >> authentication
> >> On 2012-03-23 04:31, Bao, Zheng wrote:
> >> > Hi,
> >> > In our lab, we need to get access the repository
> >> >by http because of the firewall. I tried to push
> >> >my commit through http. It didn't say anything wrong.
> >> >But I cannot see my change on gerrit. I am wondering
> >> >if http really works. Does it?
> >> Hi,
> >> I'm just a lurker on this mail list... but I can see gerrit commits
> >> mailed to this list.
> >> Cut from an example:
> >> "Zheng Bao (zheng.bao at amd.com) just uploaded a new patch set to
> >> which you can find at http://review.coreboot.org/620
> >> -gerrit
> >> commit e384f2026c59b7e7f774f34f6f9e9287bdc8868b
> >> Author: zbao <fishbaozi at gmail.com>
> >> Date: ? Thu Mar 22 18:33:33 2012 +0800
> >> ? ? Add sb800 spi support."
> >> HTH
> >> Best regards
> >> Peter K
> >> --
> >> coreboot mailing list: coreboot at coreboot.org
> >> http://www.coreboot.org/mailman/listinfo/coreboot
> > --
> > coreboot mailing list: coreboot at coreboot.org
> > http://www.coreboot.org/mailman/listinfo/coreboot
> Generally this works for Gerrit, not 100% sure if it is correctly
> configured for coreboots gerrit instance.
> You have to use the URI http://review.coreboot.org/p/coreboot.git
> You will also have to generate a HTTP password at
> Lastly at least git 1.6.6 is required for this to work.
> Hope this helps.
More information about the coreboot