[coreboot] ASUS m5a88-v AGESA port (bulldozer): Linux does not set up SATA drives
darkdefende at gmail.com
darkdefende at gmail.com
Mon Jul 8 20:59:15 CEST 2013
A little more progress today.
I noticed that not all init functions for sb800 were called.
It seems like they should be be called from:
src/northbridge/amd/agesa/family15/northbridge.c
because that's where they are called from in f14 code.
So I added that and now it seems solve some problems but the SATA softreset
problem still remains.
I added "pci=nocrs" to the kernel boot option and the BAR errors aren't there
anymore.
I have attached a new diff and logfile of the kernel output.
To me it doesn't seem to be any more obvious errors so I would be really
grateful for any help or hints at all.
I have managed to boot from usb sticks with both fedora and ubuntu. They
seem to be able to mount the usb stick and boot to desktop. However because
I'm stuck with serial and they don't seem to have any serial login
I can't confirm or dump lspci etc. But I can see that they respond to the
power button event and doesn't seem like they hang or crash.
Does anybody know a dist where serial console login is on by default?
-------------- next part --------------
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.12-gentoo (root at coreboot) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.5, pie-0.4.7) ) #3 SMP PREEMPT Thu Jun 14 05:44:56 CEST 2012
Command line: root=/dev/sda2 console=tty0 console=ttyS0,115200,n8 pci=nocrs
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000418000000 (usable)
NX (Execute Disable) protection: active
DMI present.
No AGP bridge found
last_pfn = 0x418000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbffe0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000fda00] fda00
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bffe0000
init_memory_mapping: 0000000100000000-0000000418000000
ACPI: RSDP 00000000000fd9e0 00014 (v00 CORE )
ACPI: RSDT 00000000bffe2424 0003C (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: FACP 00000000bffe53f8 000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
ACPI: DSDT 00000000bffe24c8 02EF0 (v02 ASUS COREBOOT 00010001 INTL 20090123)
ACPI: FACS 00000000bffe53b8 00040
ACPI: HPET 00000000bffe54f0 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: APIC 00000000bffe5528 0008C (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: HEST 00000000bffe55b8 001D0 (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: SSDT 00000000bffe5790 01714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: SSDT 00000000bffe6eb0 00045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
No NUMA configuration found
Faking a node at 0000000000000000-0000000418000000
Initmem setup node 0 0000000000000000-0000000418000000
NODE_DATA [0000000417ffb000 - 0000000417ffffff]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00418000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bffe0
0: 0x00100000 -> 0x00418000
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x17] enabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000bffe0000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 0000000100000000
Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff880417c00000 s76416 r8192 d21888 u262144
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3963242
Policy zone: Normal
Kernel command line: root=/dev/sda2 console=tty0 console=ttyS0,115200,n8 pci=nocrs
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ b292000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ b4000000
PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
Memory: 15722144k/17170432k available (7836k kernel code, 1049156k absent, 399132k reserved, 5094k data, 652k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:744 16
Console: colour dummy device 80x25
console [tty0] enabled
console [ttyS0] enabled
Fast TSC calibration using PIT
Detected 3099.920 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6199.84 BogoMIPS (lpj=3099920)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys freezer
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
ACPI: Core revision 20110623
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: AMD FX(tm)-8120 Eight-Core Processor stepping 02
Performance Events: AMD Family 15h PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
MCE: In-kernel MCE decoding enabled.
Booting Node 0, Processors #1
#2
#3
#4
#5
#6
#7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (49596.67 BogoMIPS).
RTC time: 21:31:58, date: 01/03/13
NET: Registered protocol family 16
kworker/u:0 used greatest stack depth: 5424 bytes left
Extended Config Space enabled on 1 nodes
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: BIOS offers _BFS
ACPI: If "acpi.bfs=1" improves resume, please notify linux-acpi at vger.kernel.org
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [PFN0] (on)
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: PCI bridge to [bus 03-03]
pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 05-05]
pci 0000:00:15.1: PCI bridge to [bus 06-06]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:05.0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.24.
PCI: Using ACPI for IRQ routing
cfg80211: Calling CRDA to update world regulatory domain
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:01.0: bridge window [mem 0xe0100000-0xe02fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:09.0: bridge window [mem 0xe0300000-0xe03fffff]
pci 0000:00:0a.0: PCI bridge to [bus 03-03]
pci 0000:00:0a.0: bridge window [mem 0xe0400000-0xe04fffff]
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci 0000:00:15.0: PCI bridge to [bus 05-05]
pci 0000:00:15.1: PCI bridge to [bus 06-06]
pci 0000:00:15.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:15.1: bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:12.0: PCI INT A disabled
pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:12.2: PCI INT B disabled
pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.0: PCI INT A disabled
pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:13.2: PCI INT B disabled
pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:14.5: PCI INT C disabled
pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:16.0: PCI INT A disabled
pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:16.2: PCI INT B disabled
pci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:03:00.0: PCI INT A disabled
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ b4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
perf: AMD IBS detected (0x000000ff)
microcode: CPU0: patch_level=0x06000624
microcode: CPU1: patch_level=0x06000624
microcode: CPU2: patch_level=0x06000624
microcode: CPU3: patch_level=0x06000624
microcode: CPU4: patch_level=0x06000624
microcode: CPU5: patch_level=0x06000624
microcode: CPU6: patch_level=0x06000624
microcode: CPU7: patch_level=0x06000624
microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
audit: initializing netlink socket (disabled)
type=2000 audit(1357248717.119:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NTFS driver 2.1.30 [Flags: R/W].
msgmni has been set to 30836
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (on)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (40 C)
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[drm] initializing kernel modesetting (RS880 0x1002:0x9715 0x1002:0x0000).
[drm] register mmio base: 0xE0200000
[drm] register mmio size: 65536
radeon 0000:01:05.0: Invalid ROM contents
[drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
radeon 0000:01:05.0: Fatal error during GPU init
[drm] radeon: finishing device.
[TTM] Memory type 2 has not been initialized.
radeon 0000:01:05.0: PCI INT A disabled
radeon: probe of 0000:01:05.0 failed with error -22
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024 at 0xe0508000 port 0xe0508100 irq 19
ata2: SATA max UDMA/133 abar m1024 at 0xe0508000 port 0xe0508180 irq 19
ata3: SATA max UDMA/133 abar m1024 at 0xe0508000 port 0xe0508200 irq 19
ata4: SATA max UDMA/133 abar m1024 at 0xe0508000 port 0xe0508280 irq 19
ata5: SATA max UDMA/133 abar m1024 at 0xe0508000 port 0xe0508300 irq 19
ata6: SATA max UDMA/133 abar m1024 at 0xe0508000 port 0xe0508380 irq 19
Refined TSC clocksource calibration: 3100.111 MHz.
Switching to clocksource tsc
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
sky2: driver version 1.30
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:06:00.0: eth0: RTL8168evl/8111evl at 0xffffc900025d0000, 00:00:00:00:00:03, XID 0c900800 IRQ 44
r8169 0000:06:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xe0508400
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.12-gentoo ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xe0508500
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.12-gentoo ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: debug port 1
ehci_hcd 0000:00:16.2: irq 17, io mem 0xe0508600
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.12-gentoo ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 18, io mem 0xe0504000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.2.12-gentoo ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xe0505000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.2.12-gentoo ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:14.5: irq 18, io mem 0xe0506000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.2.12-gentoo ohci_hcd
usb usb6: SerialNumber: 0000:00:14.5
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:16.0: irq 18, io mem 0xe0507000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.2.12-gentoo ohci_hcd
usb usb7: SerialNumber: 0000:00:16.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel at redhat.com
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
hda-intel: no codecs initialized
snd_hda_intel 0000:00:14.2: PCI INT A disabled
snd_hda_intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
hda-intel: Codec #0 probe error; disabling it...
hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00070503
ALSA device list:
#0: HDA ATI HDMI at 0xe0210000 irq 19
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Registering the dns_resolver key type
registered taskstats version 1
Magic number: 13:897:549
pci_link PNP0C0F:00: hash matches
console [netcon0] enabled
netconsole: network logging started
ata2: softreset failed (1st FIS failed)
ata1: softreset failed (1st FIS failed)
ata2: softreset failed (1st FIS failed)
ata1: softreset failed (1st FIS failed)
ata2: softreset failed (1st FIS failed)
ata2: limiting SATA link speed to 3.0 Gbps
ata1: softreset failed (1st FIS failed)
ata1: limiting SATA link speed to 3.0 Gbps
ata2: softreset failed (1st FIS failed)
ata2: reset failed, giving up
ata1: softreset failed (1st FIS failed)
ata1: reset failed, giving up
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
Root-NFS: no NFS server address
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "sda2" or unknown-block(2,0)
Please append a correct "root=" boot option; here are the available partitions:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
Pid: 1, comm: swapper/0 Not tainted 3.2.12-gentoo #3
Call Trace:
[<ffffffff8179857d>] panic+0x96/0x1a4
[<ffffffff817986c7>] ? printk+0x3c/0x3e
[<ffffffff81cb5f3b>] mount_block_root+0x14a/0x1ea
[<ffffffff81cb61ca>] mount_root+0xe0/0xeb
[<ffffffff811307e1>] ? sys_unlink+0x11/0x20
[<ffffffff81cb6345>] prepare_namespace+0x170/0x19d
[<ffffffff81cb5c91>] kernel_init+0x140/0x150
[<ffffffff817a4134>] kernel_thread_helper+0x4/0x10
[<ffffffff81cb5b51>] ? start_kernel+0x342/0x342
[<ffffffff817a4130>] ? gs_change+0xb/0xb
-------------- next part --------------
--- kernel_v_notime 2013-07-07 13:11:36.000000000 +0200
+++ kernel_notime 2013-07-08 20:30:17.000000000 +0200
@@ -1,102 +1,98 @@
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.12-gentoo (root at coreboot) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.5, pie-0.4.7) ) #3 SMP PREEMPT Thu Jun 14 05:44:56 CEST 2012
-Command line: root=/dev/sda2 console=tty0 console=ttyS0,115200,n8
+Command line: root=/dev/sda2 console=tty0 console=ttyS0,115200,n8 pci=nocrs
BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
- BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
- BIOS-e820: 00000000cff80000 - 00000000cff98000 (ACPI data)
- BIOS-e820: 00000000cff98000 - 00000000cffc0000 (ACPI NVS)
- BIOS-e820: 00000000cffc0000 - 00000000d0000000 (reserved)
- BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
- BIOS-e820: 0000000100000000 - 000000041f000000 (usable)
+ BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
+ BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
+ BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
+ BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
+ BIOS-e820: 00000000bffe0000 - 00000000e0000000 (reserved)
+ BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
+ BIOS-e820: 0000000100000000 - 0000000418000000 (usable)
NX (Execute Disable) protection: active
DMI present.
No AGP bridge found
-last_pfn = 0x41f000 max_arch_pfn = 0x400000000
+last_pfn = 0x418000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
-last_pfn = 0xcff80 max_arch_pfn = 0x400000000
-found SMP MP-table at [ffff8800000ff780] ff780
+last_pfn = 0xbffe0 max_arch_pfn = 0x400000000
+found SMP MP-table at [ffff8800000fda00] fda00
Using GB pages for direct mapping
-init_memory_mapping: 0000000000000000-00000000cff80000
-init_memory_mapping: 0000000100000000-000000041f000000
-ACPI: RSDP 00000000000fbc30 00024 (v02 ACPIAM)
-ACPI: XSDT 00000000cff80100 00054 (v01 123011 XSDT1420 20111230 MSFT 00000097)
-ACPI: FACP 00000000cff80290 000F4 (v03 123011 FACP1420 20111230 MSFT 00000097)
-ACPI: DSDT 00000000cff80460 0F160 (v01 A1867 A1867001 00000001 INTL 20060113)
-ACPI: FACS 00000000cff98000 00040
-ACPI: APIC 00000000cff80390 0008C (v01 123011 APIC1420 20111230 MSFT 00000097)
-ACPI: MCFG 00000000cff80420 0003C (v01 123011 OEMMCFG 20111230 MSFT 00000097)
-ACPI: OEMB 00000000cff98040 00072 (v01 123011 OEMB1420 20111230 MSFT 00000097)
-ACPI: HPET 00000000cff8f8b0 00038 (v01 123011 OEMHPET 20111230 MSFT 00000097)
-ACPI: SSDT 00000000cff8f8f0 01714 (v01 A M I POWERNOW 00000001 AMD 00000001)
+init_memory_mapping: 0000000000000000-00000000bffe0000
+init_memory_mapping: 0000000100000000-0000000418000000
+ACPI: RSDP 00000000000fd9e0 00014 (v00 CORE )
+ACPI: RSDT 00000000bffe2424 0003C (v01 CORE COREBOOT 00000000 CORE 00000000)
+ACPI: FACP 00000000bffe53f8 000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
+ACPI: DSDT 00000000bffe24c8 02EF0 (v02 ASUS COREBOOT 00010001 INTL 20090123)
+ACPI: FACS 00000000bffe53b8 00040
+ACPI: HPET 00000000bffe54f0 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
+ACPI: APIC 00000000bffe5528 0008C (v01 CORE COREBOOT 00000000 CORE 00000000)
+ACPI: HEST 00000000bffe55b8 001D0 (v01 CORE COREBOOT 00000000 CORE 00000000)
+ACPI: SSDT 00000000bffe5790 01714 (v01 AMD POWERNOW 00000001 AMD 00000001)
+ACPI: SSDT 00000000bffe6eb0 00045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
No NUMA configuration found
-Faking a node at 0000000000000000-000000041f000000
-Initmem setup node 0 0000000000000000-000000041f000000
- NODE_DATA [000000041effb000 - 000000041effffff]
+Faking a node at 0000000000000000-0000000418000000
+Initmem setup node 0 0000000000000000-0000000418000000
+ NODE_DATA [0000000417ffb000 - 0000000417ffffff]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
- Normal 0x00100000 -> 0x0041f000
+ Normal 0x00100000 -> 0x00418000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
- 0: 0x00000010 -> 0x0000009a
- 0: 0x00000100 -> 0x000cff80
- 0: 0x00100000 -> 0x0041f000
+ 0: 0x00000010 -> 0x0000009f
+ 0: 0x00000100 -> 0x000bffe0
+ 0: 0x00100000 -> 0x00418000
ACPI: PM-Timer IO Port: 0x808
-ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
-ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
-ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
-ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
-ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
-ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
-ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
-ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
-ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
-IOAPIC[0]: apic_id 24, version 33, address 0xfec00000, GSI 0-23
+ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
+ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
+ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
+ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
+ACPI: LAPIC (acpi_id[0x04] lapic_id[0x14] enabled)
+ACPI: LAPIC (acpi_id[0x05] lapic_id[0x15] enabled)
+ACPI: LAPIC (acpi_id[0x06] lapic_id[0x16] enabled)
+ACPI: LAPIC (acpi_id[0x07] lapic_id[0x17] enabled)
+ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
+IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Using ACPI (MADT) for SMP configuration information
-ACPI: HPET id: 0x8300 base: 0xfed00000
+ACPI: HPET id: 0x43538210 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
-PM: Registered nosave memory: 000000000009a000 - 000000000009b000
-PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
-PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
-PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
-PM: Registered nosave memory: 00000000cff80000 - 00000000cff98000
-PM: Registered nosave memory: 00000000cff98000 - 00000000cffc0000
-PM: Registered nosave memory: 00000000cffc0000 - 00000000d0000000
-PM: Registered nosave memory: 00000000d0000000 - 00000000ffa00000
-PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000
-Allocating PCI resources starting at d0000000 (gap: d0000000:2fa00000)
+PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
+PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
+PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
+PM: Registered nosave memory: 00000000bffe0000 - 00000000e0000000
+PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
+PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
+PM: Registered nosave memory: 00000000fc000000 - 0000000100000000
+Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
-PERCPU: Embedded 26 pages/cpu @ffff88041ec00000 s76416 r8192 d21888 u262144
-Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4056901
+PERCPU: Embedded 26 pages/cpu @ffff880417c00000 s76416 r8192 d21888 u262144
+Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3963242
Policy zone: Normal
-Kernel command line: root=/dev/sda2 console=tty0 console=ttyS0,115200,n8
+Kernel command line: root=/dev/sda2 console=tty0 console=ttyS0,115200,n8 pci=nocrs
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
-Node 0: aperture @ 0 size 32 MB
+Node 0: aperture @ b292000000 size 32 MB
+Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
-Mapping aperture over 65536 KB of RAM @ c4000000
-PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
-Memory: 16092424k/17285120k available (7836k kernel code, 787416k absent, 405280k reserved, 5094k data, 652k init)
+Mapping aperture over 65536 KB of RAM @ b4000000
+PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
+Memory: 15722144k/17170432k available (7836k kernel code, 1049156k absent, 399132k reserved, 5094k data, 652k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:744 16
-Extended CMOS year: 2000
-Console: colour VGA+ 80x25
+Console: colour dummy device 80x25
console [tty0] enabled
console [ttyS0] enabled
Fast TSC calibration using PIT
-Detected 3114.509 MHz processor.
-Calibrating delay loop (skipped), value calculated using timer frequency.. 6229.01 BogoMIPS (lpj=3114509)
+Detected 3099.920 MHz processor.
+Calibrating delay loop (skipped), value calculated using timer frequency.. 6199.84 BogoMIPS (lpj=3099920)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
@@ -109,7 +105,7 @@
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
ACPI: Core revision 20110623
-..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
+..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: AMD FX(tm)-8120 Eight-Core Processor stepping 02
Performance Events: AMD Family 15h PMU driver.
... version: 0
@@ -128,15 +124,12 @@
#6
#7 Ok.
Brought up 8 CPUs
-Total of 8 processors activated (49820.29 BogoMIPS).
-PM: Registering ACPI NVS region at cff98000 (163840 bytes)
-RTC time: 20:31:44, date: 12/03/12
+Total of 8 processors activated (49596.67 BogoMIPS).
+RTC time: 21:31:58, date: 01/03/13
NET: Registered protocol family 16
kworker/u:0 used greatest stack depth: 5424 bytes left
Extended Config Space enabled on 1 nodes
ACPI: bus type pci registered
-PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
-PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab <bio-0> at 0
@@ -144,22 +137,16 @@
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
-ACPI: Executed 3 blocks of module-level executable AML code
+ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
+ACPI: BIOS offers _BFS
+ACPI: If "acpi.bfs=1" improves resume, please notify linux-acpi at vger.kernel.org
ACPI: Using IOAPIC for interrupt routing
-PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
-PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
-ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
+ACPI: Power Resource [PFN0] (on)
ACPI: No dock devices found.
-PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
+PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
-pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
-pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
-pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
-pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
-pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
-pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:0a.0: PCI bridge to [bus 03-03]
@@ -168,14 +155,14 @@
pci 0000:00:15.1: PCI bridge to [bus 06-06]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
-ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15)
-ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 14 15)
-ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 14 15)
-ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *9 10 11 14 15)
-ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
-ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
-ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
-ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 14 15) *0
+ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
+ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
+ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
+ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
+ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
+ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
+ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
+ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:05.0
@@ -195,60 +182,22 @@
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
-system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
-system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
-system 00:0a: [io 0x04d0-0x04d1] has been reserved
-system 00:0a: [io 0x040b] has been reserved
-system 00:0a: [io 0x04d6] has been reserved
-system 00:0a: [io 0x0c00-0x0c01] has been reserved
-system 00:0a: [io 0x0c14] has been reserved
-system 00:0a: [io 0x0c50-0x0c51] has been reserved
-system 00:0a: [io 0x0c52] has been reserved
-system 00:0a: [io 0x0c6c] has been reserved
-system 00:0a: [io 0x0c6f] has been reserved
-system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
-system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
-system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
-system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
-system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
-system 00:0a: [io 0x0b00-0x0b3f] has been reserved
-system 00:0a: [io 0x0800-0x089f] has been reserved
-system 00:0a: [io 0x0b00-0x0b1f] has been reserved
-system 00:0a: [io 0x0b20-0x0b3f] has been reserved
-system 00:0a: [io 0x0900-0x090f] has been reserved
-system 00:0a: [io 0x0910-0x091f] has been reserved
-system 00:0a: [io 0xfe00-0xfefe] has been reserved
-system 00:0a: [mem 0xffb80000-0xffbfffff] has been reserved
-system 00:0a: [mem 0xfec10000-0xfec1001f] has been reserved
-system 00:0a: [mem 0xfed80000-0xfed80fff] has been reserved
-system 00:0b: [io 0x0230-0x023f] has been reserved
-system 00:0b: [io 0x0290-0x029f] has been reserved
-system 00:0b: [io 0x0300-0x030f] has been reserved
-system 00:0b: [io 0x0a30-0x0a3f] has been reserved
-system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
-system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
-system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
-system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
-system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
-system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
-pnp: PnP ACPI: found 14 devices
+pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: PCI bridge to [bus 01-01]
-pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
-pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
-pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
+pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
+pci 0000:00:01.0: bridge window [mem 0xe0100000-0xe02fffff]
+pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
-pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
-pci 0000:00:09.0: bridge window [mem 0xfea00000-0xfeafffff]
+pci 0000:00:09.0: bridge window [io 0x2000-0x2fff]
+pci 0000:00:09.0: bridge window [mem 0xe0300000-0xe03fffff]
pci 0000:00:0a.0: PCI bridge to [bus 03-03]
-pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
+pci 0000:00:0a.0: bridge window [mem 0xe0400000-0xe04fffff]
pci 0000:00:14.4: PCI bridge to [bus 04-04]
pci 0000:00:15.0: PCI bridge to [bus 05-05]
pci 0000:00:15.1: PCI bridge to [bus 06-06]
-pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
-pci 0000:00:15.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
-pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
-pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
+pci 0000:00:15.1: bridge window [io 0x3000-0x3fff]
+pci 0000:00:15.1: bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
NET: Registered protocol family 2
@@ -282,26 +231,26 @@
pci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:03:00.0: PCI INT A disabled
PCI-DMA: Disabling AGP.
-PCI-DMA: aperture base @ c4000000 size 65536 KB
+PCI-DMA: aperture base @ b4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
perf: AMD IBS detected (0x000000ff)
-microcode: CPU0: patch_level=0x06000613
-microcode: CPU1: patch_level=0x06000613
-microcode: CPU2: patch_level=0x06000613
-microcode: CPU3: patch_level=0x06000613
-microcode: CPU4: patch_level=0x06000613
-microcode: CPU5: patch_level=0x06000613
-microcode: CPU6: patch_level=0x06000613
-microcode: CPU7: patch_level=0x06000613
+microcode: CPU0: patch_level=0x06000624
+microcode: CPU1: patch_level=0x06000624
+microcode: CPU2: patch_level=0x06000624
+microcode: CPU3: patch_level=0x06000624
+microcode: CPU4: patch_level=0x06000624
+microcode: CPU5: patch_level=0x06000624
+microcode: CPU6: patch_level=0x06000624
+microcode: CPU7: patch_level=0x06000624
microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
audit: initializing netlink socket (disabled)
-type=2000 audit(1354566703.447:1): initialized
+type=2000 audit(1357248717.119:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NTFS driver 2.1.30 [Flags: R/W].
-msgmni has been set to 31559
+msgmni has been set to 30836
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
@@ -309,82 +258,49 @@
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
-00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
+serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
+ACPI: Fan [FAN0] (on)
+thermal LNXTHERM:00: registered as thermal_zone0
+ACPI: Thermal Zone [TZ00] (40 C)
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
-[drm] initializing kernel modesetting (RS880 0x1002:0x9715 0x1043:0x843E).
-[drm] register mmio base: 0xFE9F0000
+[drm] initializing kernel modesetting (RS880 0x1002:0x9715 0x1002:0x0000).
+[drm] register mmio base: 0xE0200000
[drm] register mmio size: 65536
-ATOM BIOS: 113
-radeon 0000:01:05.0: VRAM: 368M 0x00000000C0000000 - 0x00000000D6FFFFFF (368M used)
-radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
-[drm] Detected VRAM RAM=368M, BAR=256M
-[drm] RAM width 32bits DDR
-[TTM] Zone kernel: Available graphics memory: 8079188 kiB.
-[TTM] Zone dma32: Available graphics memory: 2097152 kiB.
-[TTM] Initializing pool allocator.
-[drm] radeon: 368M of VRAM memory ready
-[drm] radeon: 512M of GTT memory ready.
-[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
-[drm] Driver supports precise vblank timestamp query.
-[drm] radeon: irq initialized.
-[drm] GART: num cpu pages 131072, num gpu pages 131072
-[drm] Loading RS780 Microcode
-[drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
-radeon 0000:01:05.0: WB enabled
-[drm] ring test succeeded in 1 usecs
-[drm] radeon: ib pool ready.
-[drm] ib test succeeded in 0 usecs
-[drm] Radeon Display Connectors
-[drm] Connector 0:
-[drm] VGA
-[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
-[drm] Encoders:
-[drm] CRT1: INTERNAL_KLDSCP_DAC1
-[drm] Connector 1:
-[drm] DVI-D
-[drm] HPD1
-[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
-[drm] Encoders:
-[drm] DFP3: INTERNAL_KLDSCP_LVTMA
-[drm] radeon: power management initialized
-[drm] fb mappable at 0xD0142000
-[drm] vram apper at 0xD0000000
-[drm] size 9216000
-[drm] fb depth is 24
-[drm] pitch is 7680
-fbcon: radeondrmfb (fb0) is primary device
-Console: switching to colour frame buffer device 240x75
-Refined TSC clocksource calibration: 3113.984 MHz.
-Switching to clocksource tsc
-fb0: radeondrmfb frame buffer device
-drm: registered panic notifier
-[drm] Initialized radeon 2.12.0 20080528 for 0000:01:05.0 on minor 0
+radeon 0000:01:05.0: Invalid ROM contents
+[drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
+radeon 0000:01:05.0: Fatal error during GPU init
+[drm] radeon: finishing device.
+[TTM] Memory type 2 has not been initialized.
+radeon 0000:01:05.0: PCI INT A disabled
+radeon: probe of 0000:01:05.0 failed with error -22
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
-ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
+ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
-ata1: SATA max UDMA/133 abar m1024 at 0xfe7ffc00 port 0xfe7ffd00 irq 19
-ata2: SATA max UDMA/133 abar m1024 at 0xfe7ffc00 port 0xfe7ffd80 irq 19
-ata3: SATA max UDMA/133 abar m1024 at 0xfe7ffc00 port 0xfe7ffe00 irq 19
-ata4: SATA max UDMA/133 abar m1024 at 0xfe7ffc00 port 0xfe7ffe80 irq 19
-ata5: SATA max UDMA/133 abar m1024 at 0xfe7ffc00 port 0xfe7fff00 irq 19
-ata6: SATA max UDMA/133 abar m1024 at 0xfe7ffc00 port 0xfe7fff80 irq 19
+ata1: SATA max UDMA/133 abar m1024 at 0xe0508000 port 0xe0508100 irq 19
+ata2: SATA max UDMA/133 abar m1024 at 0xe0508000 port 0xe0508180 irq 19
+ata3: SATA max UDMA/133 abar m1024 at 0xe0508000 port 0xe0508200 irq 19
+ata4: SATA max UDMA/133 abar m1024 at 0xe0508000 port 0xe0508280 irq 19
+ata5: SATA max UDMA/133 abar m1024 at 0xe0508000 port 0xe0508300 irq 19
+ata6: SATA max UDMA/133 abar m1024 at 0xe0508000 port 0xe0508380 irq 19
+Refined TSC clocksource calibration: 3100.111 MHz.
+Switching to clocksource tsc
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
@@ -392,7 +308,7 @@
sky2: driver version 1.30
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
-r8169 0000:06:00.0: eth0: RTL8168evl/8111evl at 0xffffc9000187e000, c8:60:00:60:b1:c2, XID 0c900800 IRQ 44
+r8169 0000:06:00.0: eth0: RTL8168evl/8111evl at 0xffffc900025d0000, 00:00:00:00:00:03, XID 0c900800 IRQ 44
r8169 0000:06:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
@@ -400,7 +316,7 @@
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
-ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe7ff800
+ehci_hcd 0000:00:12.2: irq 17, io mem 0xe0508400
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
@@ -414,7 +330,7 @@
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
-ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe7ff400
+ehci_hcd 0000:00:13.2: irq 17, io mem 0xe0508500
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
@@ -425,39 +341,27 @@
hub 2-0:1.0: 5 ports detected
ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:16.2: EHCI Host Controller
-ata5: SATA link down (SStatus 0 SControl 300)
-ata3: SATA link down (SStatus 0 SControl 300)
-ata4: SATA link down (SStatus 0 SControl 300)
-ata6: SATA link down (SStatus 0 SControl 300)
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: debug port 1
-ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe7ff000
+ehci_hcd 0000:00:16.2: irq 17, io mem 0xe0508600
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+ata5: SATA link down (SStatus 0 SControl 300)
+ata6: SATA link down (SStatus 0 SControl 300)
+ata4: SATA link down (SStatus 0 SControl 300)
+ata3: SATA link down (SStatus 0 SControl 300)
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.12-gentoo ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
-ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
-ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
-ata1.00: ATA-8: Corsair Force GT, 1.3.3, max UDMA/133
-ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
-ata1.00: configured for UDMA/133
-scsi 0:0:0:0: Direct-Access ATA Corsair Force GT 1.3. PQ: 0 ANSI: 5
-sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
-sd 0:0:0:0: Attached scsi generic sg0 type 0
-sd 0:0:0:0: [sda] Write Protect is off
-sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1 sda2
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
-sd 0:0:0:0: [sda] Attached SCSI disk
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
-ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe7fe000
+ohci_hcd 0000:00:12.0: irq 18, io mem 0xe0504000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
@@ -468,7 +372,7 @@
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
-ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe7fd000
+ohci_hcd 0000:00:13.0: irq 18, io mem 0xe0505000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
@@ -476,21 +380,10 @@
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
-ata2.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
-ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
-ata2.00: configured for UDMA/133
-scsi 1:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
-sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
-sd 1:0:0:0: [sdb] 4096-byte physical blocks
-sd 1:0:0:0: Attached scsi generic sg1 type 0
-sd 1:0:0:0: [sdb] Write Protect is off
-sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
-sd 1:0:0:0: [sdb] Attached SCSI disk
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
-ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe7fc000
+ohci_hcd 0000:00:14.5: irq 18, io mem 0xe0506000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
@@ -501,7 +394,7 @@
ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
-ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe7f3000
+ohci_hcd 0000:00:16.0: irq 18, io mem 0xe0507000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
@@ -515,25 +408,28 @@
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
-i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
-i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
+i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
-rtc_cmos 00:03: RTC can wake from S4
-rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
-rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
-input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
+rtc_cmos 00:01: RTC can wake from S4
+rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
+rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel at redhat.com
+input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
+hda-intel: no codecs initialized
+snd_hda_intel 0000:00:14.2: PCI INT A disabled
snd_hda_intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
+hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
+hda-intel: Codec #0 probe error; disabling it...
+hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x00070503
ALSA device list:
- #0: HDA ATI SB at 0xfe7f4000 irq 16
- #1: HDA ATI HDMI at 0xfe9e8000 irq 19
+ #0: HDA ATI HDMI at 0xe0210000 irq 19
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
@@ -546,20 +442,42 @@
NET: Registered protocol family 17
Registering the dns_resolver key type
registered taskstats version 1
- Magic number: 8:860:547
+ Magic number: 13:897:549
+pci_link PNP0C0F:00: hash matches
console [netcon0] enabled
netconsole: network logging started
+ata2: softreset failed (1st FIS failed)
+ata1: softreset failed (1st FIS failed)
+ata2: softreset failed (1st FIS failed)
+ata1: softreset failed (1st FIS failed)
+ata2: softreset failed (1st FIS failed)
+ata2: limiting SATA link speed to 3.0 Gbps
+ata1: softreset failed (1st FIS failed)
+ata1: limiting SATA link speed to 3.0 Gbps
+ata2: softreset failed (1st FIS failed)
+ata2: reset failed, giving up
+ata1: softreset failed (1st FIS failed)
+ata1: reset failed, giving up
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
-EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
-EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240)
-EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
-VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
-Freeing unused kernel memory: 652k freed
-Write protecting the kernel read-only data: 12288k
-Freeing unused kernel memory: 332k freed
-Freeing unused kernel memory: 1392k freed
+Root-NFS: no NFS server address
+VFS: Unable to mount root fs via NFS, trying floppy.
+VFS: Cannot open root device "sda2" or unknown-block(2,0)
+Please append a correct "root=" boot option; here are the available partitions:
+Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
+Pid: 1, comm: swapper/0 Not tainted 3.2.12-gentoo #3
+Call Trace:
+ [<ffffffff8179857d>] panic+0x96/0x1a4
+ [<ffffffff817986c7>] ? printk+0x3c/0x3e
+ [<ffffffff81cb5f3b>] mount_block_root+0x14a/0x1ea
+ [<ffffffff81cb61ca>] mount_root+0xe0/0xeb
+ [<ffffffff811307e1>] ? sys_unlink+0x11/0x20
+ [<ffffffff81cb6345>] prepare_namespace+0x170/0x19d
+ [<ffffffff81cb5c91>] kernel_init+0x140/0x150
+ [<ffffffff817a4134>] kernel_thread_helper+0x4/0x10
+ [<ffffffff81cb5b51>] ? start_kernel+0x342/0x342
+ [<ffffffff817a4130>] ? gs_change+0xb/0xb
More information about the coreboot
mailing list