[coreboot] Asrock IMB-A180 not booting

[Dave Frodin]

I wouldn't think it would be a bad board if the AMI bios works.

When you enabled "Add a VGA BIOS image" and changed the default graphics ID
for your VBIOS did you change it from
1002,9830 to 1002,9834?


On Mon, Nov 25, 2013 at 4:35 PM, Prop 395 <prop395 at gmail.com> wrote:

> I tried the .config file and adjusted the VBIOS for my dev system, but I
> am still getting the same results (no video).  The sticker on the
> motherboard near the power connector says IMB-A180E-H E. Printed on the
> right edge of the motherboard near the heat sink it says IMB-A180-H REV.
> G/A 1.02.
>
> I also tried the stock AMI BIOS to confirm it still works (and it did).
>
> Do I just have a bad board?
>
>
>
>
> --
> coreboot mailing list: coreboot at coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20131125/5cfd044d/attachment.html>