[coreboot] coreboot for old mainboard

Foli Ayivoh it21 at compuserve.com
Sun Aug 17 22:53:13 CEST 2014


Hi, just wanted to know if I could install coreboot onto my old board?
Thanks in advance!

The requested data:

board vendor:           Shuttle
board name:             AN35N Ultra V1.1
CPU:			AMD Athlon XP 3200+
northbridge:            Nvidia nForce2
southbridge:            Nvidia MCP
vendor board info:      http://www.shuttle.eu/_archive/older/en/an35n_faq.htm

lspci -tvnn:
-[0000:00]-+-00.0  NVIDIA Corporation nForce2 IGP2 [10de:01e0]
           +-00.1  NVIDIA Corporation nForce2 Memory Controller 1 [10de:01eb]
           +-00.2  NVIDIA Corporation nForce2 Memory Controller 4 [10de:01ee]
           +-00.3  NVIDIA Corporation nForce2 Memory Controller 3 [10de:01ed]
           +-00.4  NVIDIA Corporation nForce2 Memory Controller 2 [10de:01ec]
           +-00.5  NVIDIA Corporation nForce2 Memory Controller 5 [10de:01ef]
           +-01.0  NVIDIA Corporation nForce2 ISA Bridge [10de:0060]
           +-01.1  NVIDIA Corporation nForce2 SMBus (MCP) [10de:0064]
           +-02.0  NVIDIA Corporation nForce2 USB Controller [10de:0067]
           +-02.1  NVIDIA Corporation nForce2 USB Controller [10de:0067]
           +-02.2  NVIDIA Corporation nForce2 USB Controller [10de:0068]
           +-04.0  NVIDIA Corporation nForce2 Ethernet Controller [10de:0066]
           +-06.0  NVIDIA Corporation nForce2 AC97 Audio Controler (MCP) [10de:006a]
           +-08.0-[01-02]--+-04.0  Adaptec AIC-7892B U160/m [9005:0081]
           |               +-07.0  Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller [1095:3512]
           +-09.0  NVIDIA Corporation nForce2 IDE [10de:0065]
           \-1e.0-[03]--

superiotool -dV:
superiotool r6158
Found ITE IT8712F (id=0x8712, rev=0x5) at 0x2e

flashrom -p internal -V:
flashrom v0.9.7-r1711 on Linux 3.11.10-17-pae (i686)
flashrom is free software, get the source code at http://www.flashrom.org

flashrom was built with libpci 3.2.0, GCC 4.8.1 20130909 [gcc-4_8-branch revision 202388], little endian
Command line (3 args): /usr/sbin/flashrom -p internal -V
Calibrating delay loop... OS timer resolution is 1 usecs, 901M loops per second, delay more than 10% too short (got 82% of expected delay),
recalculating... 824M loops per second, delay more than 10% too short (got 75% of expected delay),
recalculating... 1013M loops per second, 10 myus = 9 us, 100 myus = 163 us, 1000 myus = 919 us, 10000 myus = 33256 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: " "
DMI string system-product-name: " "
DMI string system-version: " "
DMI string baseboard-manufacturer: "Shuttle Inc"
DMI string baseboard-product-name: "AN35 "
DMI string baseboard-version: " "
DMI string chassis-type: "Desktop"
Found ITE Super I/O, ID 0x8712 on port 0x2e
Found chipset "NVIDIA NForce2" with PCI ID 10de:0060. Enabling flash write... OK.
Super I/O ID 0x8712 is not on the list of flash capable controllers.
The following protocols are supported: Non-SPI.
*** Probing output reduced to findings ***
Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xda, id2 0xb0
Found Winbond flash chip "W49V002A" (256 kB, LPC) at physical address 0xfffc0000.
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xda, id2 0xb0
Found Winbond flash chip "W49V002A" (256 kB, LPC).
No operations were specified.
Restoring PCI config space for 00:01:0 reg 0x6d
Restoring PCI config space for 00:01:0 reg 0x92




More information about the coreboot mailing list