[coreboot] New board with unsupported cpu, chipset, and superIO

David Hubbard david.c.hubbard+coreboot at gmail.com
Thu Aug 28 19:36:22 CEST 2014


On Thu, Aug 28, 2014 at 11:28 AM, Todd Weaver <todd at m2n.com> wrote:
> >> It appears "If it is not supported by coreboot then you will have a lot
> >> of work in front of you."
> >
> > This view, is based on not having the Intel code and writing your own
code
> > to set up the DRAM controllers.  I imagine that it would be very
difficult
> > to write code for modern DRAM controllers, you have to read the EEPROMs
> > on the DIMMs to determine the DRAM size and other characteristics, then
> > set up the controller to match.  Finally, DDR3 (used by this processor)
has a
> > training phase to get data accesses aligned in time.  This might be
implemented
> > in hardware, or you might have to write code to do it.  I don't know!
> >
>
> The truth here is that we NEED to have a blob-free version (libreboot),
so I have a lot of work ahead of me :)

The reality is that Intel has no plans to release code for Xeon E3-1200 v3
and HM86 Express. Coreboot's progress so far has been to integrate the
blobs.

David
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20140828/9b1cc1f6/attachment.html>


More information about the coreboot mailing list