[coreboot] Wyse S10 Geode GX2
Peter Stuge
peter at stuge.se
Mon Feb 17 12:30:14 CET 2014
andrew at cogman.info wrote:
> > Sounds fine. The missing interrupt services may or may not be
> > critical. You'll have to read up on what they do:
>
> Thanks, I'll read the AMD Geode Doc's to try and work out what
> these are and if they matter.
Interrupt 15h has nothing to do with Geode. It's a BIOS interrupt
service.
> >> >> Entering northbridge.c: cpu_bus_init
> >> Initializing CPU #0
> >> CPU: vendor NSC device 552
> >> CPU: family 05, model 05, stepping 02
> >> geode_gx2_init
> >> Enabling cache
> >> Oops, exception 0 while executing option rom
> >> Unexpected Exception: 0 @ 00:00000000 - Halting
> >
> > I'm not sure if this is OK.
>
> I didn't include an option ROM in the configuration
Then start debugging this error.
> Name Offset Type Size
> vsa 0x0 stage 153621
That vsa is three-five times the size I would have expected.
I think you're on your own from here.
//Peter
More information about the coreboot
mailing list