[coreboot] F2A85-M: Chassis Fan Not Working
Rudolf Marek
r.marek at assembler.cz
Sun Jul 6 23:09:01 CEST 2014
On 6.7.2014 23:05, ron minnich wrote:
> So Rudolf, this just takes the control loop out of the picture and always
> enables the fan? This stuff always confuses me.
Yes it should. I used the same programming as in orig BIOS but perhaps I missed
something. I will check later what went wrong. The change should make it manual
mode (which has some non-zero pwm by default, so fan should spin)
Thanks
Rudolf
>
> ron
>
>
> On Sun, Jul 6, 2014 at 1:47 PM, Rudolf Marek <r.marek at assembler.cz
> <mailto:r.marek at assembler.cz>> wrote:
>
> Hi
>
> I think this is the problem: change the following line in the devicetree.cb
>
> register hwm_fan2_ctl_pwm = "0x80"
>
> To 0x00 For some reason automatic settings for fan2 does not work... or is
> badly set up.
>
> Idwer: He uses the extra fan, not only the CPU fan.
>
> Please let us know if this helps,
>
> Thanks
> Rudolf
>
>
> --
> coreboot mailing list: coreboot at coreboot.org <mailto:coreboot at coreboot.org>
> http://www.coreboot.org/__mailman/listinfo/coreboot
> <http://www.coreboot.org/mailman/listinfo/coreboot>
>
>
>
>
More information about the coreboot
mailing list