[flashrom] [PATCH] ICH6+ FWH IDSEL override

[Stefan Reinauer]

On 8/14/09 12:55 AM, Chris Kinney wrote:
> [root at k2 flashrom]# ./flashrom -p internal=fwh_idsel=0
> flashrom v0.9.0-r670
> coreboot table found at 0xcf7f3c00.
> Vendor ID: KONTRON, part ID: 986LCD-M
> Found chipset "Intel ICH7/ICH7R", enabling flash write...
> Setting IDSEL=0 for top 8 MBOK.
> This chipset supports the following protocols: LPC,FWH.
> Disabling flash write protection for board "Kontron 986LCD-M"... OK.
> Calibrating delay loop... OK.
> Found chip "SST SST49LF016C" (2048 KB, FWH) at physical address
> 0xffe00000.
> No operations were specified.


Why is this needed again? Does the Kontron default to a non-0 IDSEL?

I never had problems flashing on the Kontron without any such option..

Stefan



-- 
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
      Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.de  • http://www.coresystems.de/
Registergericht: Amtsgericht Freiburg • HRB 7656
Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866