[flashrom] #1: flashRom doesn't work on MotherBoard with ICH9 + MP2532

[FENG Yu Ning]

(Sorry to reply on the list, but I got "Trac Error: Submission
rejected as potential spam".)

> #1: flashRom doesn't work on MotherBoard with ICH9 + MP2532
> Comment(by Anne Le Coq <annyvonne.le_coq@…>):

>  Root Complex Register Block address = 0xfed1c000
>  GCS = 0x9a0468: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1
>  (SPI)
>  Top Swap : not enabled
>  SPIBAR = 0xfed1c000 + 0x3800
>  0x04: 0x6018 (HSFS)
>  FLOCKDN 0, FDV 1, FDOPSS 1, SCIP 0, BERASE 3, AEL 0, FCERR 0, FDONE 0
>  0x50: 0x00001b1b (FRAP)
>  BMWAG 0, BMRAG 0, BRWA 27, BRRA 27
>  0x54: 0x00010000 (FREG0)
>  0x58: 0x03ff0090 (FREG1)
>  0x5C: 0x005f000c (FREG2)
>  0x60: 0x007f0060 (FREG3)
>  0x64: 0x00090002 (FREG4)
>  0x74: 0x00000000 (PR0)
>  0x78: 0x00000000 (PR1)
>  0x7C: 0x00000000 (PR2)
>  0x80: 0x00000000 (PR3)
>  0x84: 0x00000000 (PR4)
>  0x90: 0x007f100c (SSFS, SSFC)
>  0x94: 0x0006     (PREOP)
>  0x96: 0x463b     (OPTYPE)
>  0x98: 0x05d80302 (OPMENU)
>  0x9C: 0xc79f0190 (OPMENU+4)
>  0xA0: 0x00000000 (BBAR)
>  0xB0: 0x00000000 (FDOC)
>  Programming OPCODES...
>  program_opcodes: preop=0006 optype=463b opmenu=05d80302c79f0190
>  done

0x06 is in the PREOP register. I think it is ignored due to current
design policy.

yu ning