[flashrom] [PATCH] Convert PCI-based programmers to LE MMIO accessors

[Carl-Daniel Hailfinger]

On 27.07.2010 17:33, Michael Manulis wrote:
> Acked-by: Misha Manulis <misha at manulis.com>
>   

Thanks, committed in r1111.

> ./flashrom -p satasii -V
> flashrom v0.9.2-r1075 on Linux 2.6.16.13-vsm (ppc), built with
> libpci 2.2.4-pre4, GCC 4.1.2 20061115 (prerelease) (Debian 4.1.1-21),
> big endian
>
> Calibrating delay loop... OS timer resolution is 1 usecs, 499M loops per
> second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1003 us,
> 10000 myus = 9984 us, 4 myus = 4 us, OK.
> Initializing satasii programmer
> Found "Silicon Image SiI 3512 [SATALink/SATARaid] SATA Ctrl" (1095:3512, BDF 00:0a.0).
> Requested BAR is IO
> ===
> This PCI device is UNTESTED. Please report the 'flashrom -p xxxx' output 
> to flashrom at flashrom.org if it works for you. Thank you for your help!
> ===
> Mapping SATA SIL registers at 0xf0000000, unaligned size 0x100.
>   

I'll mark your controller as supported in a followup patch.

Regards,
Carl-Daniel

-- 
http://www.hailfinger.org/