[flashrom] [PATCH] Write protection handling for Atmel AT25*
Uwe Hermann
uwe at hermann-uwe.de
Thu Jul 29 14:12:21 CEST 2010
On Tue, Jul 27, 2010 at 12:47:47AM +0200, Carl-Daniel Hailfinger wrote:
> Next try, with one status register printing corner case fixed and with
> a better changelog.
>
> Add detailed status register printing and unlocking for all ATMEL AT25*
> chips.
>
> Add support for Atmel AT25DF081A and AT25DQ161.
>
> Some chips require EWSR before WRSR, others require WREN before WRSR,
> and some support both variants. Add feature_bits to select the correct
> SPI command, and default to EWSR.
>
> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
Looks good.
Acked-by: Uwe Hermann <uwe at hermann-uwe.de>
I have to admit that I did _not_ cross-check the bits against the
datasheet, though. It's compile-tested, however.
> + /* WRSR performs a self-timed erase before the changes take effect. */
> + programmer_delay(100 * 1000);
Why 100ms here? Is that mentioned in some datasheet or standardized or
estimated? Is it the same for all chips?
> + result = spi_send_multicommand(cmds);
> + if (result) {
> + msg_cerr("%s failed during command execution\n",
> + __func__);
> + }
> + /* WRSR performs a self-timed erase before the changes take effect. */
> + programmer_delay(100 * 1000);
Ditto.
Uwe.
--
http://hermann-uwe.de | http://sigrok.org
http://randomprojects.org | http://unmaintained-free-software.org
More information about the flashrom
mailing list