[flashrom] Success: Flashrom r1060 on DFI LanParty JR X58 H3T6

Thu Jul 29 22:10:46 CEST 2010

Just want to pop up this Success-Story, as I never saw an answer that the mainboard 
was added to the list. 

Erasing,flashing, verifying worked flawlessly onboard and via the SPI header externally via bus-pirate (even though it 
was pretty slow in comparison to the onboard flashing). 

The mainboard, manuals and BIOS can be viewed/received at:
http://lp.lanparty.com.tw/portal/CM -> Series: Lanparty JR -> JR X58-T3H6 

Kind regards,

Daniel

Am 25.06.2010 um 12:26 schrieb Daniel Flinkmann:

> Hi, 
> 
> There was a new BIOS version available for my DFI LP JR X58 H3T6 Mainboard available. 
> As the last flash via Bus-Pirate worked fine, I tried it this time via the (running) mainboard 
> on the fly. The results are following. 
> 
> Please have a look at the erase section in the second log output: 
> 
> Writing flash chip… Erasing flash before programming… Erasing flash chip… Looking at blockwise erase function 0… trying… 0×000000-0×000fff, ich_spi_send_multicommand: 
> FIXME: Add on-the-fly reprogramming of the chipset opcode list.
> Invalid OPCODE 0×20
> spi_block_erase_20 failed during command execution at address 0×0
> Looking at blockwise erase function 1… trying… 0×000000-0×007fff, ich_spi_send_multicommand: FIXME: Add on-the-fly reprogramming of the chipset opcode list.
> Invalid  OPCODE 0×52
> spi_block_erase_52 failed during command execution at address 0×0
> 
> 
> Kind regards,
> 
> Daniel
> 
> # flashrom -V
> flashrom v0.9.2-r1060 on Linux 2.6.35-5-server (x86_64), built with libpci 3.0.0, GCC 4.4.4, little endian
> flashrom is free software, get the source code at http://www.flashrom.org
> 
> Calibrating delay loop... OS timer resolution is 1 usecs, 1466M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1000 us, 10000 myus = 10006 us, 4 myus = 4 us, OK.
> Initializing internal programmer
> No coreboot table found.
> DMI string system-manufacturer: "System Manufact"
> DMI string system-product-name: "System Product"
> DMI string system-version: "1.0"
> DMI string baseboard-manufacturer: "DFI Inc."
> DMI string baseboard-product-name: "DFI LP JR X58"
> DMI string baseboard-version: "1.0"
> DMI string chassis-type: "Desktop"
> Found ITE Super I/O, id 8718
> Found chipset "Intel ICH10R", enabling flash write... chipset PCI ID is 8086:3a16, 
> 0xfff80000/0xffb80000 FWH IDSEL: 0x0
> 0xfff00000/0xffb00000 FWH IDSEL: 0x0
> 0xffe80000/0xffa80000 FWH IDSEL: 0x1
> 0xffe00000/0xffa00000 FWH IDSEL: 0x1
> 0xffd80000/0xff980000 FWH IDSEL: 0x2
> 0xffd00000/0xff900000 FWH IDSEL: 0x2
> 0xffc80000/0xff880000 FWH IDSEL: 0x3
> 0xffc00000/0xff800000 FWH IDSEL: 0x3
> 0xff700000/0xff300000 FWH IDSEL: 0x4
> 0xff600000/0xff200000 FWH IDSEL: 0x5
> 0xff500000/0xff100000 FWH IDSEL: 0x6
> 0xff400000/0xff000000 FWH IDSEL: 0x7
> 0xfff80000/0xffb80000 FWH decode enabled
> 0xfff00000/0xffb00000 FWH decode enabled
> 0xffe80000/0xffa80000 FWH decode disabled
> 0xffe00000/0xffa00000 FWH decode disabled
> 0xffd80000/0xff980000 FWH decode disabled
> 0xffd00000/0xff900000 FWH decode disabled
> 0xffc80000/0xff880000 FWH decode disabled
> 0xffc00000/0xff800000 FWH decode disabled
> 0xff700000/0xff300000 FWH decode disabled
> 0xff600000/0xff200000 FWH decode disabled
> 0xff500000/0xff100000 FWH decode disabled
> 0xff400000/0xff000000 FWH decode disabled
> Maximum FWH chip size: 0x100000 bytes
> BIOS Lock Enable: enabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x3
> 
> Root Complex Register Block address = 0xfed1c000
> GCS = 0x65: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0x0 (reserved)
> Top Swap : not enabled
> SPIBAR = 0xfed1c000 + 0x3800
> 0x04: 0x2008 (HSFS)
> FLOCKDN 0, FDV 0, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0
> 0x50: 0x00000202 (FRAP)
> BMWAG 0, BMRAG 0, BRWA 2, BRRA 2
> 0x54: 0x00001fff (FREG0)
> 0x58: 0x00001fff (FREG1)
> 0x5C: 0x00001fff (FREG2)
> 0x60: 0x00001fff (FREG3)
> 0x64: 0x00001fff (FREG4)
> 0x74: 0x00000000 (PR0)
> 0x78: 0x00000000 (PR1)
> 0x7C: 0x00000000 (PR2)
> 0x80: 0x00000000 (PR3)
> 0x84: 0x00000000 (PR4)
> 0x90: 0x00414004 (SSFS, SSFC)
> 0x94: 0x5006     (PREOP)
> 0x96: 0x463b     (OPTYPE)
> 0x98: 0x05d80302 (OPMENU)
> 0x9C: 0xc79f0190 (OPMENU+4)
> 0xA0: 0x00000000 (BBAR)
> 0xB0: 0x00000000 (FDOC)
> Programming OPCODES... 
> program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190
> done
> SPI Read Configuration: prefetching disabled, caching enabled, OK.
> This chipset supports the following protocols: FWH,SPI.
> No IT87* serial flash segment enabled.
> Probing for AMD Am29F010A/B, 128 KB: skipped.
> Probing for AMD Am29F002(N)BB, 256 KB: skipped.
> Probing for AMD Am29F002(N)BT, 256 KB: skipped.
> Probing for AMD Am29F016D, 2048 KB: skipped.
> Probing for AMD Am29F040B, 512 KB: skipped.
> Probing for AMD Am29F080B, 1024 KB: skipped.
> Probing for AMD Am29LV040B, 512 KB: skipped.
> Probing for AMD Am29LV081B, 1024 KB: skipped.
> Probing for ASD AE49F2008, 256 KB: skipped.
> Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT29C512, 64 KB: skipped.
> Probing for Atmel AT29C010A, 128 KB: skipped.
> Probing for Atmel AT29C020, 256 KB: skipped.
> Probing for Atmel AT29C040A, 512 KB: skipped.
> Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Atmel AT49BV512, 64 KB: skipped.
> Probing for Atmel AT49F020, 256 KB: skipped.
> Probing for Atmel AT49F002(N), 256 KB: skipped.
> Probing for Atmel AT49F002(N)T, 256 KB: skipped.
> Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for AMIC A29002B, 256 KB: skipped.
> Probing for AMIC A29002T, 256 KB: skipped.
> Probing for AMIC A29040B, 512 KB: skipped.
> Probing for AMIC A49LF040A, 512 KB: skipped.
> Probing for EMST F49B002UA, 256 KB: skipped.
> Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Eon EN29F010, 128 KB: skipped.
> Probing for EON EN29F002(A)(N)B, 256 KB: skipped.
> Probing for EON EN29F002(A)(N)T, 256 KB: skipped.
> Probing for Fujitsu MBM29F004BC, 512 KB: skipped.
> Probing for Fujitsu MBM29F004TC, 512 KB: skipped.
> Probing for Fujitsu MBM29F400BC, 512 KB: skipped.
> Probing for Fujitsu MBM29F400TC, 512 KB: skipped.
> Probing for Hyundai HY29F002T, 256 KB: skipped.
> Probing for Hyundai HY29F002B, 256 KB: skipped.
> Probing for Intel 28F001BX-B, 128 KB: skipped.
> Probing for Intel 28F001BX-T, 128 KB: skipped.
> Probing for Intel 28F004S5, 512 KB: skipped.
> Probing for Intel 28F004BV/BE-B, 512 KB: skipped.
> Probing for Intel 28F004BV/BE-T, 512 KB: skipped.
> Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped.
> Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped.
> Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix MX29F001B, 128 KB: skipped.
> Probing for Macronix MX29F001T, 128 KB: skipped.
> Probing for Macronix MX29F002B, 256 KB: skipped.
> Probing for Macronix MX29F002T, 256 KB: skipped.
> Probing for Macronix MX29LV040, 512 KB: skipped.
> Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for PMC Pm29F002T, 256 KB: skipped.
> Probing for PMC Pm29F002B, 256 KB: skipped.
> Probing for PMC Pm39LV010, 128 KB: skipped.
> Probing for PMC Pm39LV020, 256 KB: skipped.
> Probing for PMC Pm39LV040, 512 KB: skipped.
> Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0x8e
> Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for SST SST25LF040A.RES, 512 KB: Invalid OPCODE 0xab
> Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0x8e
> Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Chip status register is 00
> Chip status register: Block Protect Write Disable (BPL) is not set
> Chip status register: Auto Address Increment Programming (AAI) is not set
> Chip status register: Bit 5 / Block Protect 3 (BP3) is not set
> Chip status register: Bit 4 / Block Protect 2 (BP2) is not set
> Chip status register: Bit 3 / Block Protect 1 (BP1) is not set
> Chip status register: Bit 2 / Block Protect 0 (BP0) is not set
> Chip status register: Write Enable Latch (WEL) is not set
> Chip status register: Write In Progress (WIP/BUSY) is not set
> Found chip "SST SST25VF080B" (1024 KB, SPI) at physical address 0xfff00000.
> Probing for SST SST28SF040A, 512 KB: skipped.
> Probing for SST SST29EE010, 128 KB: skipped.
> Probing for SST SST29LE010, 128 KB: skipped.
> Probing for SST SST29EE020A, 256 KB: skipped.
> Probing for SST SST29LE020, 256 KB: skipped.
> Probing for SST SST39SF512, 64 KB: skipped.
> Probing for SST SST39SF010A, 128 KB: skipped.
> Probing for SST SST39SF020A, 256 KB: skipped.
> Probing for SST SST39SF040, 512 KB: skipped.
> Probing for SST SST39VF512, 64 KB: skipped.
> Probing for SST SST39VF010, 128 KB: skipped.
> Probing for SST SST39VF020, 256 KB: skipped.
> Probing for SST SST39VF040, 512 KB: skipped.
> Probing for SST SST39VF080, 1024 KB: skipped.
> Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x6b, id2 0xbc, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for SST SST49LF020, 256 KB: skipped.
> Probing for SST SST49LF020A, 256 KB: skipped.
> Probing for SST SST49LF040, 512 KB: skipped.
> Probing for SST SST49LF040B, 512 KB: skipped.
> Probing for SST SST49LF080A, 1024 KB: skipped.
> Probing for SST SST49LF160C, 2048 KB: skipped.
> Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID.
> Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID.
> Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID.
> Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for ST M29F002B, 256 KB: skipped.
> Probing for ST M29F002T/NT, 256 KB: skipped.
> Probing for ST M29F040B, 512 KB: skipped.
> Probing for ST M29F400BT, 512 KB: skipped.
> Probing for ST M29W010B, 128 KB: skipped.
> Probing for ST M29W040B, 512 KB: skipped.
> Probing for ST M29W512B, 64 KB: skipped.
> Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for ST M50LPW116, 2048 KB: skipped.
> Probing for SyncMOS S29C31004T, 512 KB: skipped.
> Probing for SyncMOS S29C51001T, 128 KB: skipped.
> Probing for SyncMOS S29C51002T, 256 KB: skipped.
> Probing for SyncMOS S29C51004T, 512 KB: skipped.
> Probing for TI TMS29F002RB, 256 KB: skipped.
> Probing for TI TMS29F002RT, 256 KB: skipped.
> Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Winbond W29C011, 128 KB: skipped.
> Probing for Winbond W29C020C, 256 KB: skipped.
> Probing for Winbond W29C040P, 512 KB: skipped.
> Probing for Winbond W29EE011, 128 KB: skipped.
> Probing for Winbond W39V040A, 512 KB: skipped.
> Probing for Winbond W39V040B, 512 KB: skipped.
> Probing for Winbond W39V040C, 512 KB: skipped.
> Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080A, 1024 KB: skipped.
> Probing for Winbond W49F002U, 256 KB: skipped.
> Probing for Winbond W49V002A, 256 KB: skipped.
> Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x1b, id2 0x5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for EON unknown EON SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
> Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xbf, id2 0x8e
> ===
> This flash part has status UNTESTED for operations: ERASE
> The test status of this chip may have been updated in the latest development
> version of flashrom. If you are running the latest development version,
> please email a report to flashrom at flashrom.org if any of the above operations
> work correctly for you with this flash part. Please include the flashrom
> output with the additional -V option for all operations you tested (-V, -Vr,
> -Vw, -VE), and mention which mainboard or programmer you tested.
> Thanks for your help!
> ===
> No operations were specified.
> 
> 
> 
> root at tower:~/flashrom-svn# flashrom -Vw JX58D615.BIN 
> 
> flashrom v0.9.2-r1060 on Linux 2.6.35-5-server (x86_64), built with libpci 3.0.0, 
> GCC 4.4.4, little endian
> 
> flashrom is free software, get the source code at http://www.flashrom.org
> 
> 	
> 
> Calibrating delay loop… OS timer resolution is 1 usecs, 1318M loops per second, 10 myus = 9 us, 100 myus = 90 us, 1000 myus = 899 us, 10000 myus = 9083 us, 4 myus = 4 us, OK.
> 
> Initializing internal programmer
> 
> 
> No coreboot table found.
> 
> 
> DMI string system-manufacturer: “System Manufact”
> 
> DMI string system-product-name: “System Product”
> 
> DMI string system-version: “1.0”
> 
> DMI string baseboard-manufacturer: “DFI Inc.”
> 
> DMI string baseboard-product-name: “DFI LP JR X58”
> 
> DMI string baseboard-version: “1.0”
> 
> DMI string chassis-type: “Desktop”
> 
> Found 
> ITE Super I/O, id 8718
> 
> Found chipset “Intel ICH10R”, enabling flash write… chipset 
> PCI ID is 8086:3a16, 
> 
> 0xfff80000/0xffb80000 
> FWH IDSEL: 0×0
> 
> 0xfff00000/0xffb00000 
> FWH IDSEL: 0×0
> 
> 0xffe80000/0xffa80000 
> FWH IDSEL: 0×1
> 
> 0xffe00000/0xffa00000 
> FWH IDSEL: 0×1
> 
> 0xffd80000/0xff980000 
> FWH IDSEL: 0×2
> 
> 0xffd00000/0xff900000 
> FWH IDSEL: 0×2
> 
> 0xffc80000/0xff880000 
> FWH IDSEL: 0×3
> 
> 0xffc00000/0xff800000 
> FWH IDSEL: 0×3
> 
> 0xff700000/0xff300000 
> FWH IDSEL: 0×4
> 
> 0xff600000/0xff200000 
> FWH IDSEL: 0×5
> 
> 0xff500000/0xff100000 
> FWH IDSEL: 0×6
> 
> 0xff400000/0xff000000 
> FWH IDSEL: 0×7
> 
> 0xfff80000/0xffb80000 
> FWH decode enabled
> 
> 0xfff00000/0xffb00000 
> FWH decode enabled
> 
> 0xffe80000/0xffa80000 
> FWH decode disabled
> 
> 0xffe00000/0xffa00000 
> FWH decode disabled
> 
> 0xffd80000/0xff980000 
> FWH decode disabled
> 
> 0xffd00000/0xff900000 
> FWH decode disabled
> 
> 0xffc80000/0xff880000 
> FWH decode disabled
> 
> 0xffc00000/0xff800000 
> FWH decode disabled
> 
> 0xff700000/0xff300000 
> FWH decode disabled
> 
> 0xff600000/0xff200000 
> FWH decode disabled
> 
> 0xff500000/0xff100000 
> FWH decode disabled
> 
> 0xff400000/0xff000000 
> FWH decode disabled
> 
> Maximum 
> FWH chip size: 0×100000 bytes
> 
> BIOS Lock Enable: enabled, BIOS Write Enable: enabled, BIOS_CNTL is 0×3
> 
> 
> 
> 	
> 
> Root Complex Register Block address = 0xfed1c000
> 
> GCS = 0×65: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0×0 (reserved)
> 
> Top Swap : not enabled
> 
> 
> SPIBAR = 0xfed1c000 + 0×3800
> 
> 0×04: 0×2008 (
> HSFS)
> 
> FLOCKDN 0, FDV 0, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0
> 
> 0×50: 0×00000202 (
> FRAP)
> 
> BMWAG 0, BMRAG 0, BRWA 2, BRRA 2
> 
> 0×54: 0×00001fff (FREG0)
> 
> 
> 0×58: 0×00001fff (FREG1)
> 
> 
> 0×5C: 0×00001fff (FREG2)
> 
> 
> 0×60: 0×00001fff (FREG3)
> 
> 
> 0×64: 0×00001fff (FREG4)
> 
> 
> 0×74: 0×00000000 (PR0)
> 
> 
> 0×78: 0×00000000 (PR1)
> 
> 
> 0×7C: 0×00000000 (PR2)
> 
> 
> 0×80: 0×00000000 (PR3)
> 
> 
> 0×84: 0×00000000 (PR4)
> 
> 
> 0×90: 0×00414004 (
> SSFS, SSFC)
> 
> 0×94: 0×5006     (
> PREOP)
> 
> 0×96: 0×463b     (
> OPTYPE)
> 
> 0×98: 0×05d80302 (
> OPMENU)
> 
> 0×9C: 0xc79f0190 (
> OPMENU+4)
> 
> 0xA0: 0×00000000 (
> BBAR)
> 
> 0xB0: 0×00000000 (
> FDOC)
> 
> Programming 
> OPCODES… 
> 
> program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190
> 
> 
> done
> 
> 
> SPI Read Configuration: prefetching disabled, caching enabled, OK.
> 
> This chipset supports the following protocols: 
> FWH,SPI.
> 
> No IT87* serial flash segment enabled.
> 
> 
> Probing for 
> AMD Am29F010A/B, 128 KB: skipped.
> 
> Probing for 
> AMD Am29F002(N)BB, 256 KB: skipped.
> 
> Probing for 
> AMD Am29F002(N)BT, 256 KB: skipped.
> 
> Probing for 
> AMD Am29F016D, 2048 KB: skipped.
> 
> Probing for 
> AMD Am29F040B, 512 KB: skipped.
> 
> Probing for 
> AMD Am29F080B, 1024 KB: skipped.
> 
> Probing for 
> AMD Am29LV040B, 512 KB: skipped.
> 
> Probing for 
> AMD Am29LV081B, 1024 KB: skipped.
> 
> Probing for 
> ASD AE49F2008, 256 KB: skipped.
> 
> Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT29C512, 64 KB: skipped.
> 
> 
> Probing for Atmel AT29C010A, 128 KB: skipped.
> 
> 
> Probing for Atmel AT29C020, 256 KB: skipped.
> 
> 
> Probing for Atmel AT29C040A, 512 KB: skipped.
> 
> 
> Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Atmel AT49BV512, 64 KB: skipped.
> 
> 
> Probing for Atmel AT49F020, 256 KB: skipped.
> 
> 
> Probing for Atmel 
> AT49F002, 256 KB: skipped.
> 
> Probing for Atmel 
> AT49F002T, 256 KB: skipped.
> 
> Probing for 
> AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> Probing for 
> AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> Probing for 
> AMIC A29002B, 256 KB: skipped.
> 
> Probing for 
> AMIC A29002T, 256 KB: skipped.
> 
> Probing for 
> AMIC A29040B, 512 KB: skipped.
> 
> Probing for 
> AMIC A49LF040A, 512 KB: skipped.
> 
> Probing for 
> EMST F49B002UA, 256 KB: skipped.
> 
> Probing for 
> EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Eon EN29F010, 128 KB: skipped.
> 
> 
> Probing for 
> EON EN29F002(N)B, 256 KB: skipped.
> 
> Probing for 
> EON EN29F002(N)T, 256 KB: skipped.
> 
> Probing for Fujitsu MBM29F004BC, 512 KB: skipped.
> 
> 
> Probing for Fujitsu MBM29F004TC, 512 KB: skipped.
> 
> 
> Probing for Fujitsu MBM29F400BC, 512 KB: skipped.
> 
> 
> Probing for Fujitsu MBM29F400TC, 512 KB: skipped.
> 
> 
> Probing for Hyundai HY29F002T, 256 KB: skipped.
> 
> 
> Probing for Hyundai HY29F002B, 256 KB: skipped.
> 
> 
> Probing for Intel 28F001BX-B, 128 KB: skipped.
> 
> 
> Probing for Intel 28F001BX-T, 128 KB: skipped.
> 
> 
> Probing for Intel 28F004S5, 512 KB: skipped.
> 
> 
> Probing for Intel 28F004BV/BE-B, 512 KB: skipped.
> 
> 
> Probing for Intel 28F004BV/BE-T, 512 KB: skipped.
> 
> 
> Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped.
> 
> 
> Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped.
> 
> 
> Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> 
> Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> 
> Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Macronix MX29F001B, 128 KB: skipped.
> 
> 
> Probing for Macronix MX29F001T, 128 KB: skipped.
> 
> 
> Probing for Macronix MX29F002B, 256 KB: skipped.
> 
> 
> Probing for Macronix MX29F002T, 256 KB: skipped.
> 
> 
> Probing for Macronix MX29LV040, 512 KB: skipped.
> 
> 
> Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for 
> PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> Probing for 
> PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> Probing for 
> PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> Probing for 
> PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> Probing for 
> PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> Probing for 
> PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> Probing for 
> PMC Pm29F002T, 256 KB: skipped.
> 
> Probing for 
> PMC Pm29F002B, 256 KB: skipped.
> 
> Probing for 
> PMC Pm39LV010, 128 KB: skipped.
> 
> Probing for 
> PMC Pm39LV020, 256 KB: skipped.
> 
> Probing for 
> PMC Pm39LV040, 512 KB: skipped.
> 
> Probing for 
> PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> Probing for 
> PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> 
> Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for 
> SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> Probing for 
> SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> Probing for 
> SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0×8e
> 
> Probing for 
> SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> Probing for 
> SST SST25LF040A.RES, 512 KB: Invalid OPCODE 0xab
> 
> Probing for 
> SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xbf, id2 0×8e
> 
> Probing for 
> SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> Chip status register is 00
> 
> 
> Chip status register: Block Protect Write Disable (
> BPL) is not set
> 
> Chip status register: Auto Address Increment Programming (
> AAI) is not set
> 
> Chip status register: Bit 5 / Block Protect 3 (BP3) is not set
> 
> 
> Chip status register: Bit 4 / Block Protect 2 (BP2) is not set
> 
> 
> Chip status register: Bit 3 / Block Protect 1 (BP1) is not set
> 
> 
> Chip status register: Bit 2 / Block Protect 0 (BP0) is not set
> 
> 
> Chip status register: Write Enable Latch (
> WEL) is not set
> 
> Chip status register: Write In Progress (
> WIP/BUSY) is not set
> 
> Found chip “
> SST SST25VF080B” (1024 KB, SPI) at physical address 0xfff00000.
> 
> Probing for 
> SST SST28SF040A, 512 KB: skipped.
> 
> Probing for 
> SST SST29EE010, 128 KB: skipped.
> 
> Probing for 
> SST SST29LE010, 128 KB: skipped.
> 
> Probing for 
> SST SST29EE020A, 256 KB: skipped.
> 
> Probing for 
> SST SST29LE020, 256 KB: skipped.
> 
> Probing for 
> SST SST39SF512, 64 KB: skipped.
> 
> Probing for 
> SST SST39SF010A, 128 KB: skipped.
> 
> Probing for 
> SST SST39SF020A, 256 KB: skipped.
> 
> Probing for 
> SST SST39SF040, 512 KB: skipped.
> 
> Probing for 
> SST SST39VF512, 64 KB: skipped.
> 
> Probing for 
> SST SST39VF010, 128 KB: skipped.
> 
> Probing for 
> SST SST39VF020, 256 KB: skipped.
> 
> Probing for 
> SST SST39VF040, 512 KB: skipped.
> 
> Probing for 
> SST SST39VF080, 1024 KB: skipped.
> 
> Probing for 
> SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> Probing for 
> SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0×6b, id2 0xbc, id1 is normal flash content, id2 is normal flash content
> 
> Probing for 
> SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> Probing for 
> SST SST49LF004C, 512 KB: probe_82802ab: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> Probing for 
> SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> Probing for 
> SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> Probing for 
> SST SST49LF016C, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> Probing for 
> SST SST49LF020, 256 KB: skipped.
> 
> Probing for 
> SST SST49LF020A, 256 KB: skipped.
> 
> Probing for 
> SST SST49LF040, 512 KB: skipped.
> 
> Probing for 
> SST SST49LF040B, 512 KB: skipped.
> 
> Probing for 
> SST SST49LF080A, 1024 KB: skipped.
> 
> Probing for 
> SST SST49LF160C, 2048 KB: skipped.
> 
> Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for ST M25P05.RES, 64 KB: Ignoring 
> RES in favour of RDID.
> 
> Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for ST M25P10.RES, 128 KB: Ignoring 
> RES in favour of RDID.
> 
> Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for ST M25P40-old, 512 KB: Ignoring 
> RES in favour of RDID.
> 
> Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for ST M29F002B, 256 KB: skipped.
> 
> 
> Probing for ST M29F002T/NT, 256 KB: skipped.
> 
> 
> Probing for ST M29F040B, 512 KB: skipped.
> 
> 
> Probing for ST M29F400BT, 512 KB: skipped.
> 
> 
> Probing for ST M29W010B, 128 KB: skipped.
> 
> 
> Probing for ST M29W040B, 512 KB: skipped.
> 
> 
> Probing for ST M29W512B, 64 KB: skipped.
> 
> 
> Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> 
> Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> 
> Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> 
> Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> 
> Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> 
> Probing for ST M50FW016, 2048 KB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for 
> FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> 
> Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> 
> Probing for ST M50LPW116, 2048 KB: skipped.
> 
> 
> Probing for SyncMOS S29C31004T, 512 KB: skipped.
> 
> 
> Probing for SyncMOS S29C51001T, 128 KB: skipped.
> 
> 
> Probing for SyncMOS S29C51002T, 256 KB: skipped.
> 
> 
> Probing for SyncMOS S29C51004T, 512 KB: skipped.
> 
> 
> Probing for TI TMS29F002RB, 256 KB: skipped.
> 
> 
> Probing for TI TMS29F002RT, 256 KB: skipped.
> 
> 
> Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Winbond W25×10, 128 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Winbond W25×20, 256 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Winbond W25×40, 512 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Winbond W25×80, 1024 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Winbond W25×16, 2048 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Winbond W25×32, 4096 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Winbond W25×64, 8192 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> 
> Probing for Winbond W29C011, 128 KB: skipped.
> 
> 
> Probing for Winbond W29C020C, 256 KB: skipped.
> 
> 
> Probing for Winbond W29C040P, 512 KB: skipped.
> 
> 
> Probing for Winbond W29EE011, 128 KB: skipped.
> 
> 
> Probing for Winbond W39V040A, 512 KB: skipped.
> 
> 
> Probing for Winbond W39V040B, 512 KB: skipped.
> 
> 
> Probing for Winbond W39V040C, 512 KB: skipped.
> 
> 
> Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> 
> Probing for Winbond W39V080A, 1024 KB: skipped.
> 
> 
> Probing for Winbond W49F002U, 256 KB: skipped.
> 
> 
> Probing for Winbond W49V002A, 256 KB: skipped.
> 
> 
> Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> 
> Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> 
> Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0×1b, id2 0×5c, id1 parity violation, id1 is normal flash content, id2 is normal flash content
> 
> 
> Probing for Atmel unknown Atmel 
> SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> Probing for 
> EON unknown EON SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> Probing for Macronix unknown Macronix 
> SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> Probing for 
> PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> Probing for 
> SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> Probing for ST unknown ST 
> SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> Probing for Sanyo unknown Sanyo 
> SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> Probing for Generic unknown 
> SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0xbf, id2 0×258e
> 
> Probing for Generic unknown 
> SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xbf, id2 0×8e
> 
> =
> This flash part has status UNTESTED for operations: ERASE
> The test status of this chip may have been updated in the latest development
> version of flashrom. If you are running the latest development version,
> please email a report to flashrom at flashrom.org if any of the above operations
> work correctly for you with this flash part. Please include the flashrom
> output with the additional -V option for all operations you tested (-V, -Vr,
> -Vw, -VE), and mention which mainboard or programmer you tested.
> Thanks for your help!
> =
> 
> 
> Flash image seems to be a legacy 
> BIOS. Disabling checks.
> 
> Writing flash chip… Erasing flash before programming… Erasing flash chip… Looking at blockwise erase function 0… trying… 0×000000-0×000fff, ich_spi_send_multicommand: 
> FIXME: Add on-the-fly reprogramming of the chipset opcode list.
> 
> Invalid 
> OPCODE 0×20
> 
> spi_block_erase_20 failed during command execution at address 0×0
> 
> 
> 
> 
> 	
> 
> Looking at blockwise erase function 1… trying… 0×000000-0×007fff, ich_spi_send_multicommand: FIXME: Add on-the-fly reprogramming of the chipset opcode list.
> 
> Invalid 
> OPCODE 0×52
> 
> spi_block_erase_52 failed during command execution at address 0×0
> 
> 
> 
> 
> 	
> 
> Looking at blockwise erase function 2… trying… 0×000000-0×00ffff, 0×010000-0×01ffff, 0×020000-0×02ffff, 0×030000-0×03ffff, 0×040000-0×04ffff, 0×050000-0×05ffff, 0×060000-0×06ffff, 0×070000-0×07ffff, 0×080000-0×08ffff, 0×090000-0×09ffff, 0×0a0000-0×0affff, 0×0b0000-0×0bffff, 0×0c0000-0×0cffff, 0×0d0000-0×0dffff, 0×0e0000-0×0effff, 0×0f0000-0×0fffff, 
> 
> SUCCESS.
> 
> done.
> 
> 
> COMPLETE.
> 
> Verifying flash… 
> VERIFIED.          
> 
> root at tower:~/flashrom-svn# 
> 
> 
> 
> -- 
> 	--	www.Flinkmann.de : Unix, Mac, Photography	--
> 	--	www.Hijet.de : Daihatsu and Japan related stuff 	--
> 
> 
> _______________________________________________
> flashrom mailing list
> flashrom at flashrom.org
> http://www.flashrom.org/mailman/listinfo/flashrom

-- 
	--	www.Flinkmann.de : Unix, Mac, Photography	--
	--	www.Hijet.de : Daihatsu and Japan related stuff 	--