[flashrom] [PATCH] Board enable for Asus P4S800-MX

[David Borg]

Re-sent the same patch as a file, as it lost all formatting in the text.

PS. the subsystem ID has been left blank as the PCI bridge has no subsystem ID.

On 30 July 2010 19:42, David Borg <borg.db at gmail.com> wrote:
>
> Tested and works. Thanks to Carl-Daniel Hailfinger for simplifying the
> chipset enable for this board!
>
> Index: board_enable.c
> ===================================================================
> --- board_enable.c    (revision 1127)
> +++ board_enable.c    (working copy)
> @@ -352,7 +352,9 @@
>  }
>
>  /**
> - * w83627: Enable MEMW# and set ROM size to max.
> + * Enable MEMW# and set ROM size to max.
> + * Supported chips:
> + * W83L517D, W83697HF/F/HG, W83697SF/UF/UG
>   */
>  static void w836xx_memw_enable(uint16_t port)
>  {
> @@ -1715,6 +1717,7 @@
>      {0x8086, 0x24D3, 0x1043, 0x80A6,  0x8086, 0x2578, 0x1043, 0x80F6,
> NULL,          NULL,         NULL,          "ASUS",        "P4C800-E
> Deluxe",       0,   OK, intel_ich_gpio21_raise},
>      {0x8086, 0x2570, 0x1043, 0x80F2,  0x105A, 0x3373, 0x1043, 0x80F5,
> NULL,          NULL,         NULL,          "ASUS",        "P4P800-E
> Deluxe",       0,   OK, intel_ich_gpio21_raise},
>      {0x8086, 0x2570, 0x1043, 0x80A5,  0x105A, 0x24D3, 0x1043, 0x80A6,
> NULL,          NULL,         NULL,          "ASUS",        "P4SD-LA",
>              0,   NT, intel_ich_gpio32_raise},
> +    {0x1039, 0x0661, 0x1043, 0x8113,  0x1039, 0x0003,     0,       0,
> "^P4S800-MX$", NULL,         NULL,          "ASUS",
> "P4S800-MX",           512,   OK, w836xx_memw_enable_2e},
>      {0x10B9, 0x1541,      0,      0,  0x10B9, 0x1533,      0,      0,
> "^P5A$",       "asus",       "p5a",         "ASUS",        "P5A",
>              0,   OK, board_asus_p5a},
>      {0x10DE, 0x0030, 0x1043, 0x818a,  0x8086, 0x100E, 0x1043, 0x80EE,
> NULL,          NULL,         NULL,          "ASUS",        "P5ND2-SLI
> Deluxe",      0,   OK, nvidia_mcp_gpio10_raise},
>      {0x8086, 0x24dd, 0x1043, 0x80a6,  0x8086, 0x2570, 0x1043, 0x8157,
> NULL,          NULL,         NULL,          "ASUS",        "P5PE-VM",
>              0,   OK, intel_ich_gpio21_raise},
>
> Signed-off-by: David Borg <borg.db at gmail.com>
>
>
>
> On 28 July 2010 03:06, David Borg <borg.db at gmail.com> wrote:
> >
> > Updated the patch to remove anything related to chip  (un)locking, as there is no way to unlock the superio except by a cold reset.
> >
> > Logs for the different flashrom runs and the outputs of lspci -nnvvvxxx and superiotool -deV are also attached.
> >
> > w836xx_memw_enable will work for this board, however i'd still like to see the function corrected for completeness sake. I haven't yet found a datasheet for a superio in the w83627 family where the function is correct, and the supported superio's all work with sio_mask(port, 0x24, 0x28, 0x38); Perhaps it should be fixed in a separate patch?
> >
> > Regards,
> > David
> >
> > On 1 July 2010 11:50, David Borg <borg.db at gmail.com> wrote:
> >>
> >> Patch to add support for the Asus P4S800-MX motherboard and SIS 963
> >> chipset. Invalidates previous patch: [PATCH] add support for SIS963
> >>
> >> If anyone has the output of superiotool -deV for the following working
> >> boards, please forward them, so I can merge the functions
> >> w836xx_unlock_memw_enable_2e and w836xx_memw_enable_2e, and maybe fix
> >> the function w836xx_memw_enable which I believe has a typo, such that
> >>                sio_mask(port, 0x24, 0x28, 0x28);
> >> becomes : sio_mask(port, 0x24, 0x28, 0x38);
> >>
> >> Motherboards:
> >> Albatron - PM266A Pro
> >> ASUS - A7V8X-MX SE
> >> EPoX - EP-8K5A2
> >> Shuttle - AK31
> >> Tyan - S2498 (Tomcat K7M)
> >> Termtek - TK-3370 (Rev:2.5B)
> >> MSI - MS-6590 (KT4 Ultra)
> >> MSI - MS-6712 (KT4V)
> >> MSI - MS-7005 (651M-L)
> >>
> >> Signed-off-by: David Borg <borg.db at gmail.com>
> >>
> >> Regards,
> >> David
> >
> >
> >
> > --
> > David Borg
>
>
>
> --
> David Borg



--
David Borg
-------------- next part --------------
A non-text attachment was scrubbed...
Name: board_enable_P4S800-MX.patch
Type: text/x-patch
Size: 1717 bytes
Desc: not available
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20100730/90b29591/attachment.patch>