[SeaBIOS] Does SeaBIOS support eMMC?

[Scheithauer, Mario]

Hello Kevin, Alexander,

Attached is the boot log. 
Thanks that you have a look at the eMMC initialization.
I will try the other way about both files (sdcard0, sdcard1).
I think for my case the address should be 0xd0520000 and 0xd0521000, or isn't it?

Thanks and best regards,
Mario

-----Ursprüngliche Nachricht-----
Von: Kevin O'Connor [mailto:kevin at koconnor.net] 
Gesendet: Montag, 11. Januar 2016 15:39
An: Alexander Couzens
Cc: Scheithauer, Mario; seabios at seabios.org
Betreff: Re: [SeaBIOS] Does SeaBIOS support eMMC?

On Mon, Jan 11, 2016 at 02:46:24PM +0100, Alexander Couzens wrote:
> Hi Mario,
> 
> SeaBIOS supports eMMC, but it's a bit hacky.
> For eMMC in ACPI mode you have to add files containing the address of 
> the eMMC to the cbfs.
> No idea, if eMMC in PCI mode works out-of-box.

There were some machines that apparently boot with the SDHCI controller in PCI mode, but then coreboot implements some hardware sequence to hide them via PCI and only advertise them via ACPI.  The "etc/sdcard" mechanism was implemented as a hack to get around the coreboot oddity (implementing an acpi dsdt parser isn't really an option).

Detection of normal PCI SDHCI controllers should work fine.

> cbfstool coreboot.rom add -n etc/sdcard0 -f /tmp/sdcard0 -t raw 
> cbfstool coreboot.rom add -n etc/sdcard1 -f /tmp/sdcard1 -t raw

The above can also be done with:
  cbfstool coreboot.rom add-int -i 0xd071c000 -n etc/sdcard0
  cbfstool coreboot.rom add-int -i 0xd071f000 -n etc/sdcard1

But, I wouldn't do that without inspecting the coreboot log (cbmem) to verify that the device is in acpi mode and present at those addresses.

-Kevin
-------------- next part --------------
A non-text attachment was scrubbed...
Name: baytrail.log
Type: application/octet-stream
Size: 60543 bytes
Desc: baytrail.log
URL: <http://www.seabios.org/pipermail/seabios/attachments/20160111/5b7742e0/attachment-0001.obj>