Freebios1 STPC Elite development board changes attached
fboudra at uxp.fr
Wed Feb 25 09:31:01 CET 2004
my superio base adress is 0x370.
the debug show :
handle_superio: port 0x0, defaultport 0x3f0
handle_superio: using port 0x3f0
in the Makefile.settings, i have :
what's wrong ?
> thanks for all, the compile works now. I used the redhat 7.1.
> with Debian stable (woody) it works also.
> Now i try to use the romimage with my stpc elite board but it hangs after:
> Call init
> Enabling com device: 04
> iobase = 0x03f8 irq=4
> after this some strange character ...
> On my stpc elite card, i have only 2 serial ports, no floppy, no parallel
> port. Maybe something goes wrong with this ...
> i try to use NO_KEYBOARD option set to 1 and MUST_ENABLE_FLOPPY option set
> to 0 but no change.
> if someone have an idea ..., now i'm looking into the sources.
> Best regards
More information about the coreboot