[LinuxBIOS] Halt after entering protected mode
Corey Osgood
corey_osgood at verizon.net
Mon Mar 12 23:35:27 CET 2007
This is a repost, I'm hoping some folks missed it since the last time I
posted it in a patch thread. I'm having problems getting the tyan s2507
to boot into linuxbios, it's hanging with a post code of 0x10, which
according to POSTCODES is after it enters protected mode. I've used
outb() to determine that it's hanging before it ever gets to the cpu or
mainboard initialization, but I'm having trouble tracing it back any
further, because the inner workings of LB have me very much lost.
I should probably mention that this is a dual p3 board, I don't know if
cpu/intel/model_6xx was ever inteded to be used for SMP. I've tried this
with and without smp, and even pulled one of the CPUs, and it still
hangs. I've also tried with and without APIC, with no luck. I've
attached my latest Config.lb and Options.lb from my s2507 folder. Please
post back with any suggestions!
Thanks,
Corey
-Corey
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Config.lb
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20070312/4e3a3024/attachment.ksh>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Options.lb
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20070312/4e3a3024/attachment-0001.ksh>
More information about the coreboot
mailing list