nuessle at uni-hd.de
Fri Mar 27 13:11:08 CET 2009
as someone already pointed out, we need to enable flashing first on the board using a GPIO pin.
I have attached a patch for flashrom that enables flashing on the HP DL145 G3. I tested it on the DL145 I have here.
Please specify the board on the commandline, like in
# ./flashrom -m "hp:dl145_g3" -E
The patch is probably not ready for primetime, maybe someone can review it?
Dr. Mondrian Nuessle
Phone: +49 621 181 2717 University of Heidelberg
Fax: +49 621 181 2713 Computer Architecture Group
mailto:nuessle at uni-hd.de http://ra.ziti.uni-heidelberg.de
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 1005 bytes
Desc: not available
More information about the coreboot